X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fscsi%2Flibata-core.c;h=eeeeda0481a2aec0fd5b0842c44e164e9bc14b68;hb=a1af37344f669d0fefa8c8a9e37eb6a7c086a2c2;hp=4f91b0dc572bb5b1aea66a6aed56df874808eac8;hpb=6a8a8e14bed179f2d415c7f4fee51233c35c10c3;p=powerpc.git diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 4f91b0dc57..eeeeda0481 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -61,24 +61,18 @@ #include "libata.h" -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout); -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev); -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); -static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift); -static int fgb(u32 bitmap); -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out); -static void __ata_qc_complete(struct ata_queued_cmd *qc); +static unsigned int ata_dev_set_xfermode(struct ata_port *ap, + struct ata_device *dev); +static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev); +static void ata_pio_error(struct ata_port *ap); static unsigned int ata_unique_id = 1; static struct workqueue_struct *ata_wq; -int atapi_enabled = 0; +int atapi_enabled = 1; module_param(atapi_enabled, int, 0444); MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)"); @@ -91,403 +85,6 @@ MODULE_DESCRIPTION("Library module for ATA devices"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); -/** - * ata_tf_load_pio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - outb(tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - outb(tf->hob_feature, ioaddr->feature_addr); - outb(tf->hob_nsect, ioaddr->nsect_addr); - outb(tf->hob_lbal, ioaddr->lbal_addr); - outb(tf->hob_lbam, ioaddr->lbam_addr); - outb(tf->hob_lbah, ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - outb(tf->feature, ioaddr->feature_addr); - outb(tf->nsect, ioaddr->nsect_addr); - outb(tf->lbal, ioaddr->lbal_addr); - outb(tf->lbam, ioaddr->lbam_addr); - outb(tf->lbah, ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - outb(tf->device, ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - -/** - * ata_tf_load_mmio - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ap->ioaddr.ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - writeb(tf->hob_feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->hob_nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->hob_lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->hob_lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->hob_lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", - tf->hob_feature, - tf->hob_nsect, - tf->hob_lbal, - tf->hob_lbam, - tf->hob_lbah); - } - - if (is_addr) { - writeb(tf->feature, (void __iomem *) ioaddr->feature_addr); - writeb(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writeb(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writeb(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writeb(tf->lbah, (void __iomem *) ioaddr->lbah_addr); - VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", - tf->feature, - tf->nsect, - tf->lbal, - tf->lbam, - tf->lbah); - } - - if (tf->flags & ATA_TFLAG_DEVICE) { - writeb(tf->device, (void __iomem *) ioaddr->device_addr); - VPRINTK("device 0x%X\n", tf->device); - } - - ata_wait_idle(ap); -} - - -/** - * ata_tf_load - send taskfile registers to host controller - * @ap: Port to which output is sent - * @tf: ATA taskfile register set - * - * Outputs ATA taskfile to standard ATA host controller using MMIO - * or PIO as indicated by the ATA_FLAG_MMIO flag. - * Writes the control, feature, nsect, lbal, lbam, and lbah registers. - * Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect, - * hob_lbal, hob_lbam, and hob_lbah. - * - * This function waits for idle (!BUSY and !DRQ) after writing - * registers. If the control register has a new value, this - * function also waits for idle after writing control and before - * writing the remaining registers. - * - * May be used as the tf_load() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_load_mmio(ap, tf); - else - ata_tf_load_pio(ap, tf); -} - -/** - * ata_exec_command_pio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_pio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - outb(tf->command, ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command_mmio - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf) -{ - DPRINTK("ata%u: cmd 0x%X\n", ap->id, tf->command); - - writeb(tf->command, (void __iomem *) ap->ioaddr.command_addr); - ata_pause(ap); -} - - -/** - * ata_exec_command - issue ATA command to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues PIO/MMIO write to ATA command register, with proper - * synchronization with interrupt handler / other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_exec_command(struct ata_port *ap, const struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_exec_command_mmio(ap, tf); - else - ata_exec_command_pio(ap, tf); -} - -/** - * ata_tf_to_host - issue ATA taskfile to host controller - * @ap: port to which command is being issued - * @tf: ATA taskfile register set - * - * Issues ATA taskfile register set to ATA host controller, - * with proper synchronization with interrupt handler and - * other threads. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static inline void ata_tf_to_host(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ap->ops->tf_load(ap, tf); - ap->ops->exec_command(ap, tf); -} - -/** - * ata_tf_read_pio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_pio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = inb(ioaddr->error_addr); - tf->nsect = inb(ioaddr->nsect_addr); - tf->lbal = inb(ioaddr->lbal_addr); - tf->lbam = inb(ioaddr->lbam_addr); - tf->lbah = inb(ioaddr->lbah_addr); - tf->device = inb(ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - outb(tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = inb(ioaddr->error_addr); - tf->hob_nsect = inb(ioaddr->nsect_addr); - tf->hob_lbal = inb(ioaddr->lbal_addr); - tf->hob_lbam = inb(ioaddr->lbam_addr); - tf->hob_lbah = inb(ioaddr->lbah_addr); - } -} - -/** - * ata_tf_read_mmio - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf via MMIO. - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_tf_read_mmio(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->command = ata_check_status(ap); - tf->feature = readb((void __iomem *)ioaddr->error_addr); - tf->nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->lbah = readb((void __iomem *)ioaddr->lbah_addr); - tf->device = readb((void __iomem *)ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - writeb(tf->ctl | ATA_HOB, (void __iomem *) ap->ioaddr.ctl_addr); - tf->hob_feature = readb((void __iomem *)ioaddr->error_addr); - tf->hob_nsect = readb((void __iomem *)ioaddr->nsect_addr); - tf->hob_lbal = readb((void __iomem *)ioaddr->lbal_addr); - tf->hob_lbam = readb((void __iomem *)ioaddr->lbam_addr); - tf->hob_lbah = readb((void __iomem *)ioaddr->lbah_addr); - } -} - - -/** - * ata_tf_read - input device's ATA taskfile shadow registers - * @ap: Port from which input is read - * @tf: ATA taskfile register set for storing input - * - * Reads ATA taskfile registers for currently-selected device - * into @tf. - * - * Reads nsect, lbal, lbam, lbah, and device. If ATA_TFLAG_LBA48 - * is set, also reads the hob registers. - * - * May be used as the tf_read() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -void ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - if (ap->flags & ATA_FLAG_MMIO) - ata_tf_read_mmio(ap, tf); - else - ata_tf_read_pio(ap, tf); -} - -/** - * ata_check_status_pio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_pio(struct ata_port *ap) -{ - return inb(ap->ioaddr.status_addr); -} - -/** - * ata_check_status_mmio - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * via MMIO and return its value. This also clears pending interrupts - * from this device - * - * LOCKING: - * Inherited from caller. - */ -static u8 ata_check_status_mmio(struct ata_port *ap) -{ - return readb((void __iomem *) ap->ioaddr.status_addr); -} - - -/** - * ata_check_status - Read device status reg & clear interrupt - * @ap: port where the device is - * - * Reads ATA taskfile status register for currently-selected device - * and return its value. This also clears pending interrupts - * from this device - * - * May be used as the check_status() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_check_status(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) - return ata_check_status_mmio(ap); - return ata_check_status_pio(ap); -} - - -/** - * ata_altstatus - Read device alternate status reg - * @ap: port where the device is - * - * Reads ATA taskfile alternate status register for - * currently-selected device and return its value. - * - * Note: may NOT be used as the check_altstatus() entry in - * ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -u8 ata_altstatus(struct ata_port *ap) -{ - if (ap->ops->check_altstatus) - return ap->ops->check_altstatus(ap); - - if (ap->flags & ATA_FLAG_MMIO) - return readb((void __iomem *)ap->ioaddr.altstatus_addr); - return inb(ap->ioaddr.altstatus_addr); -} - /** * ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure @@ -594,7 +191,7 @@ static const u8 ata_rw_cmds[] = { * ata_rwcmd_protocol - set taskfile r/w commands and protocol * @qc: command to examine and configure * - * Examine the device configuration and tf->flags to calculate + * Examine the device configuration and tf->flags to calculate * the proper read/write commands and protocol to use. * * LOCKING: @@ -607,7 +204,7 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) u8 cmd; int index, fua, lba48, write; - + fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0; lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0; write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0; @@ -632,91 +229,213 @@ int ata_rwcmd_protocol(struct ata_queued_cmd *qc) return -1; } -static const char * const xfer_mode_str[] = { - "UDMA/16", - "UDMA/25", - "UDMA/33", - "UDMA/44", - "UDMA/66", - "UDMA/100", - "UDMA/133", - "UDMA7", - "MWDMA0", - "MWDMA1", - "MWDMA2", - "PIO0", - "PIO1", - "PIO2", - "PIO3", - "PIO4", -}; - /** - * ata_udma_string - convert UDMA bit offset to string - * @mask: mask of bits supported; only highest bit counts. + * ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask + * @pio_mask: pio_mask + * @mwdma_mask: mwdma_mask + * @udma_mask: udma_mask * - * Determine string which represents the highest speed - * (highest bit in @udma_mask). + * Pack @pio_mask, @mwdma_mask and @udma_mask into a single + * unsigned int xfer_mask. * * LOCKING: * None. * * RETURNS: - * Constant C string representing highest speed listed in - * @udma_mask, or the constant C string "". + * Packed xfer_mask. */ +static unsigned int ata_pack_xfermask(unsigned int pio_mask, + unsigned int mwdma_mask, + unsigned int udma_mask) +{ + return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) | + ((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) | + ((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA); +} -static const char *ata_mode_string(unsigned int mask) +/** + * ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks + * @xfer_mask: xfer_mask to unpack + * @pio_mask: resulting pio_mask + * @mwdma_mask: resulting mwdma_mask + * @udma_mask: resulting udma_mask + * + * Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask. + * Any NULL distination masks will be ignored. + */ +static void ata_unpack_xfermask(unsigned int xfer_mask, + unsigned int *pio_mask, + unsigned int *mwdma_mask, + unsigned int *udma_mask) { - int i; + if (pio_mask) + *pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO; + if (mwdma_mask) + *mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA; + if (udma_mask) + *udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA; +} - for (i = 7; i >= 0; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_MWDMA + 2; i >= ATA_SHIFT_MWDMA; i--) - if (mask & (1 << i)) - goto out; - for (i = ATA_SHIFT_PIO + 4; i >= ATA_SHIFT_PIO; i--) - if (mask & (1 << i)) - goto out; +static const struct ata_xfer_ent { + unsigned int shift, bits; + u8 base; +} ata_xfer_tbl[] = { + { ATA_SHIFT_PIO, ATA_BITS_PIO, XFER_PIO_0 }, + { ATA_SHIFT_MWDMA, ATA_BITS_MWDMA, XFER_MW_DMA_0 }, + { ATA_SHIFT_UDMA, ATA_BITS_UDMA, XFER_UDMA_0 }, + { -1, }, +}; - return ""; +/** + * ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask + * @xfer_mask: xfer_mask of interest + * + * Return matching XFER_* value for @xfer_mask. Only the highest + * bit of @xfer_mask is considered. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching XFER_* value, 0 if no match found. + */ +static u8 ata_xfer_mask2mode(unsigned int xfer_mask) +{ + int highbit = fls(xfer_mask) - 1; + const struct ata_xfer_ent *ent; -out: - return xfer_mode_str[i]; + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (highbit >= ent->shift && highbit < ent->shift + ent->bits) + return ent->base + highbit - ent->shift; + return 0; } /** - * ata_pio_devchk - PATA device presence detection - * @ap: ATA channel to examine - * @device: Device to examine (starting at zero) - * - * This technique was originally described in - * Hale Landis's ATADRVR (www.ata-atapi.com), and - * later found its way into the ATA/ATAPI spec. + * ata_xfer_mode2mask - Find matching xfer_mask for XFER_* + * @xfer_mode: XFER_* of interest * - * Write a pattern to the ATA shadow registers, - * and if a device is present, it will respond by - * correctly storing and echoing back the - * ATA shadow register contents. + * Return matching xfer_mask for @xfer_mode. * * LOCKING: - * caller. + * None. + * + * RETURNS: + * Matching xfer_mask, 0 if no match found. */ - -static unsigned int ata_pio_devchk(struct ata_port *ap, - unsigned int device) +static unsigned int ata_xfer_mode2mask(u8 xfer_mode) { - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - ap->ops->dev_select(ap, device); - - outb(0x55, ioaddr->nsect_addr); - outb(0xaa, ioaddr->lbal_addr); + const struct ata_xfer_ent *ent; - outb(0xaa, ioaddr->nsect_addr); - outb(0x55, ioaddr->lbal_addr); + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return 1 << (ent->shift + xfer_mode - ent->base); + return 0; +} + +/** + * ata_xfer_mode2shift - Find matching xfer_shift for XFER_* + * @xfer_mode: XFER_* of interest + * + * Return matching xfer_shift for @xfer_mode. + * + * LOCKING: + * None. + * + * RETURNS: + * Matching xfer_shift, -1 if no match found. + */ +static int ata_xfer_mode2shift(unsigned int xfer_mode) +{ + const struct ata_xfer_ent *ent; + + for (ent = ata_xfer_tbl; ent->shift >= 0; ent++) + if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits) + return ent->shift; + return -1; +} + +/** + * ata_mode_string - convert xfer_mask to string + * @xfer_mask: mask of bits supported; only highest bit counts. + * + * Determine string which represents the highest speed + * (highest bit in @modemask). + * + * LOCKING: + * None. + * + * RETURNS: + * Constant C string representing highest speed listed in + * @mode_mask, or the constant C string "". + */ +static const char *ata_mode_string(unsigned int xfer_mask) +{ + static const char * const xfer_mode_str[] = { + "PIO0", + "PIO1", + "PIO2", + "PIO3", + "PIO4", + "MWDMA0", + "MWDMA1", + "MWDMA2", + "UDMA/16", + "UDMA/25", + "UDMA/33", + "UDMA/44", + "UDMA/66", + "UDMA/100", + "UDMA/133", + "UDMA7", + }; + int highbit; + + highbit = fls(xfer_mask) - 1; + if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str)) + return xfer_mode_str[highbit]; + return ""; +} + +static void ata_dev_disable(struct ata_port *ap, struct ata_device *dev) +{ + if (ata_dev_present(dev)) { + printk(KERN_WARNING "ata%u: dev %u disabled\n", + ap->id, dev->devno); + dev->class++; + } +} + +/** + * ata_pio_devchk - PATA device presence detection + * @ap: ATA channel to examine + * @device: Device to examine (starting at zero) + * + * This technique was originally described in + * Hale Landis's ATADRVR (www.ata-atapi.com), and + * later found its way into the ATA/ATAPI spec. + * + * Write a pattern to the ATA shadow registers, + * and if a device is present, it will respond by + * correctly storing and echoing back the + * ATA shadow register contents. + * + * LOCKING: + * caller. + */ + +static unsigned int ata_pio_devchk(struct ata_port *ap, + unsigned int device) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 nsect, lbal; + + ap->ops->dev_select(ap, device); + + outb(0x55, ioaddr->nsect_addr); + outb(0xaa, ioaddr->lbal_addr); + + outb(0xaa, ioaddr->nsect_addr); + outb(0x55, ioaddr->lbal_addr); outb(0x55, ioaddr->nsect_addr); outb(0xaa, ioaddr->lbal_addr); @@ -838,6 +557,7 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * ata_dev_try_classify - Parse returned ATA device signature * @ap: ATA channel to examine * @device: Device to examine (starting at zero) + * @r_err: Value of error register on completion * * After an event -- SRST, E.D.D., or SATA COMRESET -- occurs, * an ATA/ATAPI-defined set of values is placed in the ATA @@ -850,11 +570,14 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * LOCKING: * caller. + * + * RETURNS: + * Device type - %ATA_DEV_ATA, %ATA_DEV_ATAPI or %ATA_DEV_NONE. */ -static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) +static unsigned int +ata_dev_try_classify(struct ata_port *ap, unsigned int device, u8 *r_err) { - struct ata_device *dev = &ap->device[device]; struct ata_taskfile tf; unsigned int class; u8 err; @@ -865,8 +588,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) ap->ops->tf_read(ap, &tf); err = tf.feature; - - dev->class = ATA_DEV_NONE; + if (r_err) + *r_err = err; /* see if device passed diags */ if (err == 1) @@ -874,22 +597,20 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) else if ((device == 0) && (err == 0x81)) /* do nothing */ ; else - return err; + return ATA_DEV_NONE; - /* determine if device if ATA or ATAPI */ + /* determine if device is ATA or ATAPI */ class = ata_dev_classify(&tf); + if (class == ATA_DEV_UNKNOWN) - return err; + return ATA_DEV_NONE; if ((class == ATA_DEV_ATA) && (ata_chk_status(ap) == 0)) - return err; - - dev->class = class; - - return err; + return ATA_DEV_NONE; + return class; } /** - * ata_dev_id_string - Convert IDENTIFY DEVICE page into string + * ata_id_string - Convert IDENTIFY DEVICE page into string * @id: IDENTIFY DEVICE results we will examine * @s: string into which data is output * @ofs: offset into identify device page @@ -903,8 +624,8 @@ static u8 ata_dev_try_classify(struct ata_port *ap, unsigned int device) * caller. */ -void ata_dev_id_string(const u16 *id, unsigned char *s, - unsigned int ofs, unsigned int len) +void ata_id_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) { unsigned int c; @@ -922,6 +643,49 @@ void ata_dev_id_string(const u16 *id, unsigned char *s, } } +/** + * ata_id_c_string - Convert IDENTIFY DEVICE page into C string + * @id: IDENTIFY DEVICE results we will examine + * @s: string into which data is output + * @ofs: offset into identify device page + * @len: length of string to return. must be an odd number. + * + * This function is identical to ata_id_string except that it + * trims trailing spaces and terminates the resulting string with + * null. @len must be actual maximum length (even number) + 1. + * + * LOCKING: + * caller. + */ +void ata_id_c_string(const u16 *id, unsigned char *s, + unsigned int ofs, unsigned int len) +{ + unsigned char *p; + + WARN_ON(!(len & 1)); + + ata_id_string(id, s, ofs, len - 1); + + p = s + strnlen(s, len - 1); + while (p > s && p[-1] == ' ') + p--; + *p = '\0'; +} + +static u64 ata_id_n_sectors(const u16 *id) +{ + if (ata_id_has_lba(id)) { + if (ata_id_has_lba48(id)) + return ata_id_u64(id, 100); + else + return ata_id_u32(id, 60); + } else { + if (ata_id_current_chs_valid(id)) + return ata_id_u32(id, 57); + else + return id[1] * id[3] * id[6]; + } +} /** * ata_noop_dev_select - Select device 0/1 on ATA bus @@ -1011,90 +775,172 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, /** * ata_dump_id - IDENTIFY DEVICE info debugging output - * @dev: Device whose IDENTIFY DEVICE page we will dump + * @id: IDENTIFY DEVICE page to dump * - * Dump selected 16-bit words from a detected device's - * IDENTIFY PAGE page. + * Dump selected 16-bit words from the given IDENTIFY DEVICE + * page. * * LOCKING: * caller. */ -static inline void ata_dump_id(const struct ata_device *dev) +static inline void ata_dump_id(const u16 *id) { DPRINTK("49==0x%04x " "53==0x%04x " "63==0x%04x " "64==0x%04x " "75==0x%04x \n", - dev->id[49], - dev->id[53], - dev->id[63], - dev->id[64], - dev->id[75]); + id[49], + id[53], + id[63], + id[64], + id[75]); DPRINTK("80==0x%04x " "81==0x%04x " "82==0x%04x " "83==0x%04x " "84==0x%04x \n", - dev->id[80], - dev->id[81], - dev->id[82], - dev->id[83], - dev->id[84]); + id[80], + id[81], + id[82], + id[83], + id[84]); DPRINTK("88==0x%04x " "93==0x%04x\n", - dev->id[88], - dev->id[93]); + id[88], + id[93]); } -/* - * Compute the PIO modes available for this device. This is not as - * trivial as it seems if we must consider early devices correctly. +/** + * ata_id_xfermask - Compute xfermask from the given IDENTIFY data + * @id: IDENTIFY data to compute xfer mask from + * + * Compute the xfermask for this device. This is not as trivial + * as it seems if we must consider early devices correctly. + * + * FIXME: pre IDE drive timing (do we care ?). + * + * LOCKING: + * None. * - * FIXME: pre IDE drive timing (do we care ?). + * RETURNS: + * Computed xfermask */ - -static unsigned int ata_pio_modes(const struct ata_device *adev) +static unsigned int ata_id_xfermask(const u16 *id) { - u16 modes; + unsigned int pio_mask, mwdma_mask, udma_mask; /* Usual case. Word 53 indicates word 64 is valid */ - if (adev->id[ATA_ID_FIELD_VALID] & (1 << 1)) { - modes = adev->id[ATA_ID_PIO_MODES] & 0x03; - modes <<= 3; - modes |= 0x7; - return modes; + if (id[ATA_ID_FIELD_VALID] & (1 << 1)) { + pio_mask = id[ATA_ID_PIO_MODES] & 0x03; + pio_mask <<= 3; + pio_mask |= 0x7; + } else { + /* If word 64 isn't valid then Word 51 high byte holds + * the PIO timing number for the maximum. Turn it into + * a mask. + */ + pio_mask = (2 << (id[ATA_ID_OLD_PIO_MODES] & 0xFF)) - 1 ; + + /* But wait.. there's more. Design your standards by + * committee and you too can get a free iordy field to + * process. However its the speeds not the modes that + * are supported... Note drivers using the timing API + * will get this right anyway + */ } - /* If word 64 isn't valid then Word 51 high byte holds the PIO timing - number for the maximum. Turn it into a mask and return it */ - modes = (2 << ((adev->id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF)) - 1 ; - return modes; - /* But wait.. there's more. Design your standards by committee and - you too can get a free iordy field to process. However its the - speeds not the modes that are supported... Note drivers using the - timing API will get this right anyway */ + mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07; + + udma_mask = 0; + if (id[ATA_ID_FIELD_VALID] & (1 << 2)) + udma_mask = id[ATA_ID_UDMA_MODES] & 0xff; + + return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask); } -struct ata_exec_internal_arg { - unsigned int err_mask; - struct ata_taskfile *tf; - struct completion *waiting; -}; +/** + * ata_port_queue_task - Queue port_task + * @ap: The ata_port to queue port_task for + * + * Schedule @fn(@data) for execution after @delay jiffies using + * port_task. There is one port_task per port and it's the + * user(low level driver)'s responsibility to make sure that only + * one task is active at any given time. + * + * libata core layer takes care of synchronization between + * port_task and EH. ata_port_queue_task() may be ignored for EH + * synchronization. + * + * LOCKING: + * Inherited from caller. + */ +void ata_port_queue_task(struct ata_port *ap, void (*fn)(void *), void *data, + unsigned long delay) +{ + int rc; + + if (ap->flags & ATA_FLAG_FLUSH_PORT_TASK) + return; + + PREPARE_WORK(&ap->port_task, fn, data); + + if (!delay) + rc = queue_work(ata_wq, &ap->port_task); + else + rc = queue_delayed_work(ata_wq, &ap->port_task, delay); + + /* rc == 0 means that another user is using port task */ + WARN_ON(rc == 0); +} + +/** + * ata_port_flush_task - Flush port_task + * @ap: The ata_port to flush port_task for + * + * After this function completes, port_task is guranteed not to + * be running or scheduled. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_port_flush_task(struct ata_port *ap) +{ + unsigned long flags; + + DPRINTK("ENTER\n"); + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags |= ATA_FLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("flush #1\n"); + flush_workqueue(ata_wq); + + /* + * At this point, if a task is running, it's guaranteed to see + * the FLUSH flag; thus, it will never queue pio tasks again. + * Cancel and flush. + */ + if (!cancel_delayed_work(&ap->port_task)) { + DPRINTK("flush #2\n"); + flush_workqueue(ata_wq); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + ap->flags &= ~ATA_FLAG_FLUSH_PORT_TASK; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + DPRINTK("EXIT\n"); +} -int ata_qc_complete_internal(struct ata_queued_cmd *qc) +void ata_qc_complete_internal(struct ata_queued_cmd *qc) { - struct ata_exec_internal_arg *arg = qc->private_data; - struct completion *waiting = arg->waiting; + struct completion *waiting = qc->private_data; - if (!(qc->err_mask & ~AC_ERR_DEV)) - qc->ap->ops->tf_read(qc->ap, arg->tf); - arg->err_mask = qc->err_mask; - arg->waiting = NULL; + qc->ap->ops->tf_read(qc->ap, &qc->tf); complete(waiting); - - return 0; } /** @@ -1125,7 +971,7 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, struct ata_queued_cmd *qc; DECLARE_COMPLETION(wait); unsigned long flags; - struct ata_exec_internal_arg arg; + unsigned int err_mask; spin_lock_irqsave(&ap->host_set->lock, flags); @@ -1139,17 +985,18 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, qc->nsect = buflen / ATA_SECT_SIZE; } - arg.waiting = &wait; - arg.tf = tf; - qc->private_data = &arg; + qc->private_data = &wait; qc->complete_fn = ata_qc_complete_internal; - if (ata_qc_issue(qc)) - goto issue_fail; + qc->err_mask = ata_qc_issue(qc); + if (qc->err_mask) + ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) { + ata_port_flush_task(ap); + spin_lock_irqsave(&ap->host_set->lock, flags); /* We're racing with irq here. If we lose, the @@ -1158,8 +1005,8 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, * before the caller cleans up, it will result in a * spurious interrupt. We can live with that. */ - if (arg.waiting) { - qc->err_mask = AC_ERR_OTHER; + if (qc->flags & ATA_QCFLAG_ACTIVE) { + qc->err_mask = AC_ERR_TIMEOUT; ata_qc_complete(qc); printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n", ap->id, command); @@ -1168,12 +1015,28 @@ ata_exec_internal(struct ata_port *ap, struct ata_device *dev, spin_unlock_irqrestore(&ap->host_set->lock, flags); } - return arg.err_mask; + *tf = qc->tf; + err_mask = qc->err_mask; - issue_fail: ata_qc_free(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - return AC_ERR_OTHER; + + /* XXX - Some LLDDs (sata_mv) disable port on command failure. + * Until those drivers are fixed, we detect the condition + * here, fail the command with AC_ERR_SYSTEM and reenable the + * port. + * + * Note that this doesn't change any behavior as internal + * command failure results in disabling the device in the + * higher layer for LLDDs without new reset/EH callbacks. + * + * Kill the following code as soon as those drivers are fixed. + */ + if (ap->flags & ATA_FLAG_PORT_DISABLED) { + err_mask |= AC_ERR_SYSTEM; + ata_port_probe(ap); + } + + return err_mask; } /** @@ -1193,7 +1056,7 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) return 0; if (speed > 2) return 1; - + /* If we have no drive specific rule, then PIO 2 is non IORDY */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */ @@ -1210,137 +1073,81 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev) } /** - * ata_dev_identify - obtain IDENTIFY x DEVICE page - * @ap: port on which device we wish to probe resides - * @device: device bus address, starting at zero - * - * Following bus reset, we issue the IDENTIFY [PACKET] DEVICE - * command, and read back the 512-byte device information page. - * The device information page is fed to us via the standard - * PIO-IN protocol, but we hand-code it here. (TODO: investigate - * using standard PIO-IN paths) - * - * After reading the device information page, we use several - * bits of information from it to initialize data structures - * that will be used during the lifetime of the ata_device. - * Other data from the info page is used to disqualify certain - * older ATA devices we do not wish to support. + * ata_dev_read_id - Read ID data from the specified device + * @ap: port on which target device resides + * @dev: target device + * @p_class: pointer to class of the target device (may be changed) + * @post_reset: is this read ID post-reset? + * @p_id: read IDENTIFY page (newly allocated) + * + * Read ID data from the specified device. ATA_CMD_ID_ATA is + * performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI + * devices. This function also issues ATA_CMD_INIT_DEV_PARAMS + * for pre-ATA4 drives. * * LOCKING: - * Inherited from caller. Some functions called by this function - * obtain the host_set lock. + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. */ - -static void ata_dev_identify(struct ata_port *ap, unsigned int device) +static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev, + unsigned int *p_class, int post_reset, u16 **p_id) { - struct ata_device *dev = &ap->device[device]; - unsigned int major_version; - u16 tmp; - unsigned long xfer_modes; - unsigned int using_edd; + unsigned int class = *p_class; struct ata_taskfile tf; - unsigned int err_mask; + unsigned int err_mask = 0; + u16 *id; + const char *reason; int rc; - if (!ata_dev_present(dev)) { - DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", - ap->id, device); - return; - } - - if (ap->flags & (ATA_FLAG_SRST | ATA_FLAG_SATA_RESET)) - using_edd = 0; - else - using_edd = 1; - - DPRINTK("ENTER, host %u, dev %u\n", ap->id, device); + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); - assert (dev->class == ATA_DEV_ATA || dev->class == ATA_DEV_ATAPI || - dev->class == ATA_DEV_NONE); + ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */ - ata_dev_select(ap, device, 1, 1); /* select device 0/1 */ + id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL); + if (id == NULL) { + rc = -ENOMEM; + reason = "out of memory"; + goto err_out; + } -retry: - ata_tf_init(ap, &tf, device); + retry: + ata_tf_init(ap, &tf, dev->devno); - if (dev->class == ATA_DEV_ATA) { + switch (class) { + case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { + break; + case ATA_DEV_ATAPI: tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); + break; + default: + rc = -ENODEV; + reason = "unsupported class"; + goto err_out; } tf.protocol = ATA_PROT_PIO; err_mask = ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id)); - + id, sizeof(id[0]) * ATA_ID_WORDS); if (err_mask) { - if (err_mask & ~AC_ERR_DEV) - goto err_out; - - /* - * arg! EDD works for all test cases, but seems to return - * the ATA signature for some ATAPI devices. Until the - * reason for this is found and fixed, we fix up the mess - * here. If IDENTIFY DEVICE returns command aborted - * (as ATAPI devices do), then we issue an - * IDENTIFY PACKET DEVICE. - * - * ATA software reset (SRST, the default) does not appear - * to have this problem. - */ - if ((using_edd) && (dev->class == ATA_DEV_ATA)) { - u8 err = tf.feature; - if (err & ATA_ABORTED) { - dev->class = ATA_DEV_ATAPI; - goto retry; - } - } + rc = -EIO; + reason = "I/O error"; goto err_out; } - swap_buf_le16(dev->id, ATA_ID_WORDS); - - /* print device capabilities */ - printk(KERN_DEBUG "ata%u: dev %u cfg " - "49:%04x 82:%04x 83:%04x 84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", - ap->id, device, dev->id[49], - dev->id[82], dev->id[83], dev->id[84], - dev->id[85], dev->id[86], dev->id[87], - dev->id[88]); - - /* - * common ATA, ATAPI feature tests - */ + swap_buf_le16(id, ATA_ID_WORDS); - /* we require DMA support (bits 8 of word 49) */ - if (!ata_id_has_dma(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma\n", ap->id); - goto err_out_nosup; + /* sanity check */ + if ((class == ATA_DEV_ATA) != ata_id_is_ata(id)) { + rc = -EINVAL; + reason = "device reports illegal type"; + goto err_out; } - /* quick-n-dirty find max transfer mode; for printk only */ - xfer_modes = dev->id[ATA_ID_UDMA_MODES]; - if (!xfer_modes) - xfer_modes = (dev->id[ATA_ID_MWDMA_MODES]) << ATA_SHIFT_MWDMA; - if (!xfer_modes) - xfer_modes = ata_pio_modes(dev); - - ata_dump_id(dev); - - /* ATA-specific feature tests */ - if (dev->class == ATA_DEV_ATA) { - if (!ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; - - /* get major version */ - tmp = dev->id[ATA_ID_MAJOR_VER]; - for (major_version = 14; major_version >= 1; major_version--) - if (tmp & (1 << major_version)) - break; - + if (post_reset && class == ATA_DEV_ATA) { /* * The exact sequence expected by certain pre-ATA4 drives is: * SRST RESET @@ -1349,122 +1156,195 @@ retry: * anything else.. * Some drives were very specific about that exact sequence. */ - if (major_version < 4 || (!ata_id_has_lba(dev->id))) { - ata_dev_init_params(ap, dev); + if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) { + err_mask = ata_dev_init_params(ap, dev); + if (err_mask) { + rc = -EIO; + reason = "INIT_DEV_PARAMS failed"; + goto err_out; + } /* current CHS translation info (id[53-58]) might be * changed. reread the identify device info. */ - ata_dev_reread_id(ap, dev); + post_reset = 0; + goto retry; } + } - if (ata_id_has_lba(dev->id)) { - dev->flags |= ATA_DFLAG_LBA; + *p_class = class; + *p_id = id; + return 0; + + err_out: + printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n", + ap->id, dev->devno, reason); + kfree(id); + return rc; +} + +static inline u8 ata_dev_knobble(const struct ata_port *ap, + struct ata_device *dev) +{ + return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id))); +} + +/** + * ata_dev_configure - Configure the specified ATA/ATAPI device + * @ap: Port on which target device resides + * @dev: Target device to configure + * @print_info: Enable device info printout + * + * Configure @dev according to @dev->id. Generic and low-level + * driver specific fixups are also applied. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise + */ +static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev, + int print_info) +{ + const u16 *id = dev->id; + unsigned int xfer_mask; + int i, rc; - if (ata_id_has_lba48(dev->id)) { + if (!ata_dev_present(dev)) { + DPRINTK("ENTER/EXIT (host %u, dev %u) -- nodev\n", + ap->id, dev->devno); + return 0; + } + + DPRINTK("ENTER, host %u, dev %u\n", ap->id, dev->devno); + + /* print device capabilities */ + if (print_info) + printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x " + "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n", + ap->id, dev->devno, id[49], id[82], id[83], + id[84], id[85], id[86], id[87], id[88]); + + /* initialize to-be-configured parameters */ + dev->flags = 0; + dev->max_sectors = 0; + dev->cdb_len = 0; + dev->n_sectors = 0; + dev->cylinders = 0; + dev->heads = 0; + dev->sectors = 0; + + /* + * common ATA, ATAPI feature tests + */ + + /* find max transfer mode; for printk only */ + xfer_mask = ata_id_xfermask(id); + + ata_dump_id(id); + + /* ATA-specific feature tests */ + if (dev->class == ATA_DEV_ATA) { + dev->n_sectors = ata_id_n_sectors(id); + + if (ata_id_has_lba(id)) { + const char *lba_desc; + + lba_desc = "LBA"; + dev->flags |= ATA_DFLAG_LBA; + if (ata_id_has_lba48(id)) { dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); + lba_desc = "LBA48"; } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", - ap->id, device, - major_version, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); - } else { + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: %s\n", + ap->id, dev->devno, + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + lba_desc); + } else { /* CHS */ /* Default translation */ - dev->cylinders = dev->id[1]; - dev->heads = dev->id[3]; - dev->sectors = dev->id[6]; - dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + dev->cylinders = id[1]; + dev->heads = id[3]; + dev->sectors = id[6]; - if (ata_id_current_chs_valid(dev->id)) { + if (ata_id_current_chs_valid(id)) { /* Current CHS translation is valid. */ - dev->cylinders = dev->id[54]; - dev->heads = dev->id[55]; - dev->sectors = dev->id[56]; - - dev->n_sectors = ata_id_u32(dev->id, 57); + dev->cylinders = id[54]; + dev->heads = id[55]; + dev->sectors = id[56]; } /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", - ap->id, device, - major_version, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATA-%d, " + "max %s, %Lu sectors: CHS %u/%u/%u\n", + ap->id, dev->devno, + ata_id_major_version(id), + ata_mode_string(xfer_mask), + (unsigned long long)dev->n_sectors, + dev->cylinders, dev->heads, dev->sectors); + } + if (dev->id[59] & 0x100) { + dev->multi_count = dev->id[59] & 0xff; + DPRINTK("ata%u: dev %u multi count %u\n", + ap->id, device, dev->multi_count); } - ap->host->max_cmd_len = 16; + dev->cdb_len = 16; } /* ATAPI-specific feature tests */ else if (dev->class == ATA_DEV_ATAPI) { - if (ata_id_is_ata(dev->id)) /* sanity check */ - goto err_out_nosup; - - rc = atapi_cdb_len(dev->id); + rc = atapi_cdb_len(id); if ((rc < 12) || (rc > ATAPI_CDB_LEN)) { printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id); + rc = -EINVAL; goto err_out_nosup; } - ap->cdb_len = (unsigned int) rc; - ap->host->max_cmd_len = (unsigned char) ap->cdb_len; + dev->cdb_len = (unsigned int) rc; + + if (ata_id_cdb_intr(dev->id)) + dev->flags |= ATA_DFLAG_CDB_INTR; /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", - ap->id, device, - ata_mode_string(xfer_modes)); + if (print_info) + printk(KERN_INFO "ata%u: dev %u ATAPI, max %s\n", + ap->id, dev->devno, ata_mode_string(xfer_mask)); } - DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); - return; - -err_out_nosup: - printk(KERN_WARNING "ata%u: dev %u not supported, ignoring\n", - ap->id, device); -err_out: - dev->class++; /* converts ATA_DEV_xxx into ATA_DEV_xxx_UNSUP */ - DPRINTK("EXIT, err\n"); -} + ap->host->max_cmd_len = 0; + for (i = 0; i < ATA_MAX_DEVICES; i++) + ap->host->max_cmd_len = max_t(unsigned int, + ap->host->max_cmd_len, + ap->device[i].cdb_len); - -static inline u8 ata_dev_knobble(const struct ata_port *ap) -{ - return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(ap->device->id))); -} - -/** - * ata_dev_config - Run device specific handlers and check for - * SATA->PATA bridges - * @ap: Bus - * @i: Device - * - * LOCKING: - */ - -void ata_dev_config(struct ata_port *ap, unsigned int i) -{ /* limit bridge transfers to udma5, 200 sectors */ - if (ata_dev_knobble(ap)) { - printk(KERN_INFO "ata%u(%u): applying bridge limits\n", - ap->id, ap->device->devno); - ap->udma_mask &= ATA_UDMA5; - ap->host->max_sectors = ATA_MAX_SECTORS; - ap->host->hostt->max_sectors = ATA_MAX_SECTORS; - ap->device[i].flags |= ATA_DFLAG_LOCK_SECTORS; + if (ata_dev_knobble(ap, dev)) { + if (print_info) + printk(KERN_INFO "ata%u(%u): applying bridge limits\n", + ap->id, dev->devno); + dev->udma_mask &= ATA_UDMA5; + dev->max_sectors = ATA_MAX_SECTORS; } if (ap->ops->dev_config) - ap->ops->dev_config(ap, &ap->device[i]); + ap->ops->dev_config(ap, dev); + + DPRINTK("EXIT, drv_stat = 0x%x\n", ata_chk_status(ap)); + return 0; + +err_out_nosup: + DPRINTK("EXIT, err\n"); + return rc; } /** @@ -1484,21 +1364,59 @@ void ata_dev_config(struct ata_port *ap, unsigned int i) static int ata_bus_probe(struct ata_port *ap) { - unsigned int i, found = 0; + unsigned int classes[ATA_MAX_DEVICES]; + unsigned int i, rc, found = 0; - ap->ops->phy_reset(ap); - if (ap->flags & ATA_FLAG_PORT_DISABLED) - goto err_out; + ata_port_probe(ap); + + /* reset and determine device classes */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + if (ap->ops->probe_reset) { + rc = ap->ops->probe_reset(ap, classes); + if (rc) { + printk("ata%u: reset failed (errno=%d)\n", ap->id, rc); + return rc; + } + } else { + ap->ops->phy_reset(ap); + + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ap->device[i].class; + + ata_port_probe(ap); + } + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + /* read IDENTIFY page and configure devices */ for (i = 0; i < ATA_MAX_DEVICES; i++) { - ata_dev_identify(ap, i); - if (ata_dev_present(&ap->device[i])) { - found = 1; - ata_dev_config(ap,i); + struct ata_device *dev = &ap->device[i]; + + dev->class = classes[i]; + + if (!ata_dev_present(dev)) + continue; + + WARN_ON(dev->id != NULL); + if (ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id)) { + dev->class = ATA_DEV_NONE; + continue; + } + + if (ata_dev_configure(ap, dev, 1)) { + ata_dev_disable(ap, dev); + continue; } + + found = 1; } - if ((!found) || (ap->flags & ATA_FLAG_PORT_DISABLED)) + if (!found) goto err_out_disable; ata_set_mode(ap); @@ -1509,7 +1427,6 @@ static int ata_bus_probe(struct ata_port *ap) err_out_disable: ap->ops->port_disable(ap); -err_out: return -1; } @@ -1529,6 +1446,41 @@ void ata_port_probe(struct ata_port *ap) ap->flags &= ~ATA_FLAG_PORT_DISABLED; } +/** + * sata_print_link_status - Print SATA link status + * @ap: SATA port to printk link status about + * + * This function prints link speed and status of a SATA link. + * + * LOCKING: + * None. + */ +static void sata_print_link_status(struct ata_port *ap) +{ + u32 sstatus, tmp; + const char *speed; + + if (!ap->ops->scr_read) + return; + + sstatus = scr_read(ap, SCR_STATUS); + + if (sata_dev_present(ap)) { + tmp = (sstatus >> 4) & 0xf; + if (tmp & (1 << 0)) + speed = "1.5"; + else if (tmp & (1 << 1)) + speed = "3.0"; + else + speed = ""; + printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", + ap->id, speed, sstatus); + } else { + printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", + ap->id, sstatus); + } +} + /** * __sata_phy_reset - Wake/reset a low-level SATA PHY * @ap: SATA port associated with target SATA PHY. @@ -1563,27 +1515,14 @@ void __sata_phy_reset(struct ata_port *ap) break; } while (time_before(jiffies, timeout)); - /* TODO: phy layer with polling, timeouts, etc. */ - sstatus = scr_read(ap, SCR_STATUS); - if (sata_dev_present(ap)) { - const char *speed; - u32 tmp; + /* print link status */ + sata_print_link_status(ap); - tmp = (sstatus >> 4) & 0xf; - if (tmp & (1 << 0)) - speed = "1.5"; - else if (tmp & (1 << 1)) - speed = "3.0"; - else - speed = ""; - printk(KERN_INFO "ata%u: SATA link up %s Gbps (SStatus %X)\n", - ap->id, speed, sstatus); + /* TODO: phy layer with polling, timeouts, etc. */ + if (sata_dev_present(ap)) ata_port_probe(ap); - } else { - printk(KERN_INFO "ata%u: SATA link down (SStatus %X)\n", - ap->id, sstatus); + else ata_port_disable(ap); - } if (ap->flags & ATA_FLAG_PORT_DISABLED) return; @@ -1615,6 +1554,23 @@ void sata_phy_reset(struct ata_port *ap) ata_bus_reset(ap); } +/** + * ata_dev_pair - return other device on cable + * @ap: port + * @adev: device + * + * Obtain the other device on the same cable, or if none is + * present NULL is returned + */ + +struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev) +{ + struct ata_device *pair = &ap->device[1 - adev->devno]; + if (!ata_dev_present(pair)) + return NULL; + return pair; +} + /** * ata_port_disable - Disable port. * @ap: Port to be disabled. @@ -1643,7 +1599,7 @@ void ata_port_disable(struct ata_port *ap) * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). * These were taken from ATA/ATAPI-6 standard, rev 0a, except * for PIO 5, which is a nonstandard extension and UDMA6, which - * is currently supported only by Maxtor drives. + * is currently supported only by Maxtor drives. */ static const struct ata_timing ata_timing[] = { @@ -1658,11 +1614,11 @@ static const struct ata_timing ata_timing[] = { { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, /* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 150 }, */ - + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, - + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, @@ -1715,7 +1671,7 @@ static const struct ata_timing* ata_timing_find_mode(unsigned short speed) for (t = ata_timing; t->mode != speed; t++) if (t->mode == 0xFF) return NULL; - return t; + return t; } int ata_timing_compute(struct ata_device *adev, unsigned short speed, @@ -1725,7 +1681,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, struct ata_timing p; /* - * Find the mode. + * Find the mode. */ if (!(s = ata_timing_find_mode(speed))) @@ -1756,9 +1712,9 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, ata_timing_quantize(t, t, T, UT); /* - * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, S.M.A.R.T - * and some other commands. We have to ensure that the DMA cycle timing is - * slower/equal than the fastest PIO timing. + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T * and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. */ if (speed > XFER_PIO_4) { @@ -1767,7 +1723,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, } /* - * Lenghten active & recovery time so that cycle time is correct. + * Lengthen active & recovery time so that cycle time is correct. */ if (t->act8b + t->rec8b < t->cyc8b) { @@ -1783,98 +1739,77 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, return 0; } -static const struct { - unsigned int shift; - u8 base; -} xfer_mode_classes[] = { - { ATA_SHIFT_UDMA, XFER_UDMA_0 }, - { ATA_SHIFT_MWDMA, XFER_MW_DMA_0 }, - { ATA_SHIFT_PIO, XFER_PIO_0 }, -}; - -static u8 base_from_shift(unsigned int shift) +static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) { - int i; - - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) - if (xfer_mode_classes[i].shift == shift) - return xfer_mode_classes[i].base; - - return 0xff; -} - -static void ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev) -{ - int ofs, idx; - u8 base; - - if (!ata_dev_present(dev) || (ap->flags & ATA_FLAG_PORT_DISABLED)) - return; + unsigned int err_mask; + int rc; if (dev->xfer_shift == ATA_SHIFT_PIO) dev->flags |= ATA_DFLAG_PIO; - ata_dev_set_xfermode(ap, dev); + err_mask = ata_dev_set_xfermode(ap, dev); + if (err_mask) { + printk(KERN_ERR + "ata%u: failed to set xfermode (err_mask=0x%x)\n", + ap->id, err_mask); + return -EIO; + } - base = base_from_shift(dev->xfer_shift); - ofs = dev->xfer_mode - base; - idx = ofs + dev->xfer_shift; - WARN_ON(idx >= ARRAY_SIZE(xfer_mode_str)); + rc = ata_dev_revalidate(ap, dev, 0); + if (rc) { + printk(KERN_ERR + "ata%u: failed to revalidate after set xfermode\n", + ap->id); + return rc; + } - DPRINTK("idx=%d xfer_shift=%u, xfer_mode=0x%x, base=0x%x, offset=%d\n", - idx, dev->xfer_shift, (int)dev->xfer_mode, (int)base, ofs); + DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n", + dev->xfer_shift, (int)dev->xfer_mode); printk(KERN_INFO "ata%u: dev %u configured for %s\n", - ap->id, dev->devno, xfer_mode_str[idx]); + ap->id, dev->devno, + ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode))); + return 0; } static int ata_host_set_pio(struct ata_port *ap) { - unsigned int mask; - int x, i; - u8 base, xfer_mode; - - mask = ata_get_mode_mask(ap, ATA_SHIFT_PIO); - x = fgb(mask); - if (x < 0) { - printk(KERN_WARNING "ata%u: no PIO support\n", ap->id); - return -1; - } - - base = base_from_shift(ATA_SHIFT_PIO); - xfer_mode = base + x; - - DPRINTK("base 0x%x xfer_mode 0x%x mask 0x%x x %d\n", - (int)base, (int)xfer_mode, mask, x); + int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->pio_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = ATA_SHIFT_PIO; - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); + + if (!ata_dev_present(dev)) + continue; + + if (!dev->pio_mode) { + printk(KERN_WARNING "ata%u: no PIO support for device %d.\n", ap->id, i); + return -1; } + + dev->xfer_mode = dev->pio_mode; + dev->xfer_shift = ATA_SHIFT_PIO; + if (ap->ops->set_piomode) + ap->ops->set_piomode(ap, dev); } return 0; } -static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, - unsigned int xfer_shift) +static void ata_host_set_dma(struct ata_port *ap) { int i; for (i = 0; i < ATA_MAX_DEVICES; i++) { struct ata_device *dev = &ap->device[i]; - if (ata_dev_present(dev)) { - dev->dma_mode = xfer_mode; - dev->xfer_mode = xfer_mode; - dev->xfer_shift = xfer_shift; - if (ap->ops->set_dmamode) - ap->ops->set_dmamode(ap, dev); - } + + if (!ata_dev_present(dev) || !dev->dma_mode) + continue; + + dev->xfer_mode = dev->dma_mode; + dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode); + if (ap->ops->set_dmamode) + ap->ops->set_dmamode(ap, dev); } } @@ -1886,35 +1821,47 @@ static void ata_host_set_dma(struct ata_port *ap, u8 xfer_mode, * * LOCKING: * PCI/etc. bus probe sem. - * */ static void ata_set_mode(struct ata_port *ap) { - unsigned int xfer_shift; - u8 xfer_mode; - int rc; + int i, rc; - /* step 1: always set host PIO timings */ - rc = ata_host_set_pio(ap); - if (rc) - goto err_out; + /* step 1: calculate xfer_mask */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + unsigned int pio_mask, dma_mask; + + if (!ata_dev_present(dev)) + continue; + + ata_dev_xfermask(ap, dev); + + /* TODO: let LLDD filter dev->*_mask here */ - /* step 2: choose the best data xfer mode */ - xfer_mode = xfer_shift = 0; - rc = ata_choose_xfer_mode(ap, &xfer_mode, &xfer_shift); + pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0); + dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask); + dev->pio_mode = ata_xfer_mask2mode(pio_mask); + dev->dma_mode = ata_xfer_mask2mode(dma_mask); + } + + /* step 2: always set host PIO timings */ + rc = ata_host_set_pio(ap); if (rc) goto err_out; - /* step 3: if that xfer mode isn't PIO, set host DMA timings */ - if (xfer_shift != ATA_SHIFT_PIO) - ata_host_set_dma(ap, xfer_mode, xfer_shift); + /* step 3: set host DMA timings */ + ata_host_set_dma(ap); /* step 4: update devices' xfer mode */ - ata_dev_set_mode(ap, &ap->device[0]); - ata_dev_set_mode(ap, &ap->device[1]); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; - if (ap->flags & ATA_FLAG_PORT_DISABLED) - return; + if (!ata_dev_present(dev)) + continue; + + if (ata_dev_set_mode(ap, dev)) + goto err_out; + } if (ap->ops->post_set_mode) ap->ops->post_set_mode(ap); @@ -1925,6 +1872,26 @@ err_out: ata_port_disable(ap); } +/** + * ata_tf_to_host - issue ATA taskfile to host controller + * @ap: port to which command is being issued + * @tf: ATA taskfile register set + * + * Issues ATA taskfile register set to ATA host controller, + * with proper synchronization with interrupt handler and + * other threads. + * + * LOCKING: + * spin_lock_irqsave(host_set lock) + */ + +static inline void ata_tf_to_host(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + ap->ops->tf_load(ap, tf); + ap->ops->exec_command(ap, tf); +} + /** * ata_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled @@ -1935,12 +1902,10 @@ err_out: * or a timeout occurs. * * LOCKING: None. - * */ -static unsigned int ata_busy_sleep (struct ata_port *ap, - unsigned long tmout_pat, - unsigned long tmout) +unsigned int ata_busy_sleep (struct ata_port *ap, + unsigned long tmout_pat, unsigned long tmout) { unsigned long timer_start, timeout; u8 status; @@ -2019,45 +1984,6 @@ static void ata_bus_post_reset(struct ata_port *ap, unsigned int devmask) ap->ops->dev_select(ap, 0); } -/** - * ata_bus_edd - Issue EXECUTE DEVICE DIAGNOSTIC command. - * @ap: Port to reset and probe - * - * Use the EXECUTE DEVICE DIAGNOSTIC command to reset and - * probe the bus. Not often used these days. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host_set lock. - * - */ - -static unsigned int ata_bus_edd(struct ata_port *ap) -{ - struct ata_taskfile tf; - unsigned long flags; - - /* set up execute-device-diag (bus reset) taskfile */ - /* also, take interrupts to a known state (disabled) */ - DPRINTK("execute-device-diag\n"); - ata_tf_init(ap, &tf, 0); - tf.ctl |= ATA_NIEN; - tf.command = ATA_CMD_EDD; - tf.protocol = ATA_PROT_NODATA; - - /* do bus reset */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ata_tf_to_host(ap, &tf); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - /* spec says at least 2ms. but who knows with those - * crazy ATAPI devices... - */ - msleep(150); - - return ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); -} - static unsigned int ata_bus_softreset(struct ata_port *ap, unsigned int devmask) { @@ -2087,9 +2013,19 @@ static unsigned int ata_bus_softreset(struct ata_port *ap, * status is checked. Because waiting for "a while" before * checking status is fine, post SRST, we perform this magic * delay here as well. + * + * Old drivers/ide uses the 2mS rule and then waits for ready */ msleep(150); + + /* Before we perform post reset processing we want to see if + the bus shows 0xFF because the odd clown forgets the D7 pulldown + resistor */ + + if (ata_check_status(ap) == 0xFF) + return 1; /* Positive is failure for some reason */ + ata_bus_post_reset(ap, devmask); return 0; @@ -2120,7 +2056,7 @@ void ata_bus_reset(struct ata_port *ap) struct ata_ioports *ioaddr = &ap->ioaddr; unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; u8 err; - unsigned int dev0, dev1 = 0, rc = 0, devmask = 0; + unsigned int dev0, dev1 = 0, devmask = 0; DPRINTK("ENTER, host %u, port %u\n", ap->id, ap->port_no); @@ -2143,25 +2079,15 @@ void ata_bus_reset(struct ata_port *ap) /* issue bus reset */ if (ap->flags & ATA_FLAG_SRST) - rc = ata_bus_softreset(ap, devmask); - else if ((ap->flags & ATA_FLAG_SATA_RESET) == 0) { - /* set up device control */ - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - rc = ata_bus_edd(ap); - } - - if (rc) - goto err_out; + if (ata_bus_softreset(ap, devmask)) + goto err_out; /* * determine by signature whether we have ATA or ATAPI devices */ - err = ata_dev_try_classify(ap, 0); + ap->device[0].class = ata_dev_try_classify(ap, 0, &err); if ((slave_possible) && (err != 0x81)) - ata_dev_try_classify(ap, 1); + ap->device[1].class = ata_dev_try_classify(ap, 1, &err); /* re-enable interrupts */ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ @@ -2196,192 +2122,557 @@ err_out: DPRINTK("EXIT\n"); } -static void ata_pr_blacklisted(const struct ata_port *ap, - const struct ata_device *dev) +static int sata_phy_resume(struct ata_port *ap) { - printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, disabling DMA\n", - ap->id, dev->devno); + unsigned long timeout = jiffies + (HZ * 5); + u32 sstatus; + + scr_write_flush(ap, SCR_CONTROL, 0x300); + + /* Wait for phy to become ready, if necessary. */ + do { + msleep(200); + sstatus = scr_read(ap, SCR_STATUS); + if ((sstatus & 0xf) != 1) + return 0; + } while (time_before(jiffies, timeout)); + + return -1; } -static const char * const ata_dma_blacklist [] = { - "WDC AC11000H", - "WDC AC22100H", - "WDC AC32500H", - "WDC AC33100H", - "WDC AC31600H", - "WDC AC32100H", - "WDC AC23200L", - "Compaq CRD-8241B", - "CRD-8400B", - "CRD-8480B", - "CRD-8482B", - "CRD-84", - "SanDisk SDP3B", - "SanDisk SDP3B-64", - "SANYO CD-ROM CRD", - "HITACHI CDR-8", - "HITACHI CDR-8335", - "HITACHI CDR-8435", - "Toshiba CD-ROM XM-6202B", - "TOSHIBA CD-ROM XM-1702BC", - "CD-532E-A", - "E-IDE CD-ROM CR-840", - "CD-ROM Drive/F5A", - "WPI CDD-820", - "SAMSUNG CD-ROM SC-148C", - "SAMSUNG CD-ROM SC", - "SanDisk SDP3B-64", - "ATAPI CD-ROM DRIVE 40X MAXIMUM", - "_NEC DV5800A", -}; +/** + * ata_std_probeinit - initialize probing + * @ap: port to be probed + * + * @ap is about to be probed. Initialize it. This function is + * to be used as standard callback for ata_drive_probe_reset(). + * + * NOTE!!! Do not use this function as probeinit if a low level + * driver implements only hardreset. Just pass NULL as probeinit + * in that case. Using this function is probably okay but doing + * so makes reset sequence different from the original + * ->phy_reset implementation and Jeff nervous. :-P + */ +extern void ata_std_probeinit(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) { + sata_phy_resume(ap); + if (sata_dev_present(ap)) + ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT); + } +} -static int ata_dma_blacklisted(const struct ata_device *dev) +/** + * ata_std_softreset - reset host port via ATA SRST + * @ap: port to reset + * @verbose: fail verbosely + * @classes: resulting classes of attached devices + * + * Reset host port using ATA SRST. This function is to be used + * as standard callback for ata_drive_*_reset() functions. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_softreset(struct ata_port *ap, int verbose, unsigned int *classes) { - unsigned char model_num[40]; - char *s; - unsigned int len; - int i; + unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; + unsigned int devmask = 0, err_mask; + u8 err; - ata_dev_id_string(dev->id, model_num, ATA_ID_PROD_OFS, - sizeof(model_num)); - s = &model_num[0]; - len = strnlen(s, sizeof(model_num)); + DPRINTK("ENTER\n"); - /* ATAPI specifies that empty space is blank-filled; remove blanks */ - while ((len > 0) && (s[len - 1] == ' ')) { - len--; - s[len] = 0; + if (ap->ops->scr_read && !sata_dev_present(ap)) { + classes[0] = ATA_DEV_NONE; + goto out; } - for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i++) - if (!strncmp(ata_dma_blacklist[i], s, len)) - return 1; + /* determine if device 0/1 are present */ + if (ata_devchk(ap, 0)) + devmask |= (1 << 0); + if (slave_possible && ata_devchk(ap, 1)) + devmask |= (1 << 1); + /* select device 0 again */ + ap->ops->dev_select(ap, 0); + + /* issue bus reset */ + DPRINTK("about to softreset, devmask=%x\n", devmask); + err_mask = ata_bus_softreset(ap, devmask); + if (err_mask) { + if (verbose) + printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n", + ap->id, err_mask); + else + DPRINTK("EXIT, softreset failed (err_mask=0x%x)\n", + err_mask); + return -EIO; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + classes[0] = ata_dev_try_classify(ap, 0, &err); + if (slave_possible && err != 0x81) + classes[1] = ata_dev_try_classify(ap, 1, &err); + + out: + DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]); return 0; } -static unsigned int ata_get_mode_mask(const struct ata_port *ap, int shift) +/** + * sata_std_hardreset - reset host port via SATA phy reset + * @ap: port to reset + * @verbose: fail verbosely + * @class: resulting class of attached device + * + * SATA phy-reset host port using DET bits of SControl register. + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int sata_std_hardreset(struct ata_port *ap, int verbose, unsigned int *class) { - const struct ata_device *master, *slave; - unsigned int mask; + DPRINTK("ENTER\n"); - master = &ap->device[0]; - slave = &ap->device[1]; + /* Issue phy wake/reset */ + scr_write_flush(ap, SCR_CONTROL, 0x301); - assert (ata_dev_present(master) || ata_dev_present(slave)); + /* + * Couldn't find anything in SATA I/II specs, but AHCI-1.1 + * 10.4.2 says at least 1 ms. + */ + msleep(1); - if (shift == ATA_SHIFT_UDMA) { - mask = ap->udma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_UDMA_MODES] & 0xff); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } + /* Bring phy back */ + sata_phy_resume(ap); + + /* TODO: phy layer with polling, timeouts, etc. */ + if (!sata_dev_present(ap)) { + *class = ATA_DEV_NONE; + DPRINTK("EXIT, link offline\n"); + return 0; } - else if (shift == ATA_SHIFT_MWDMA) { - mask = ap->mwdma_mask; - if (ata_dev_present(master)) { - mask &= (master->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(master)) { - mask = 0; - ata_pr_blacklisted(ap, master); - } - } - if (ata_dev_present(slave)) { - mask &= (slave->id[ATA_ID_MWDMA_MODES] & 0x07); - if (ata_dma_blacklisted(slave)) { - mask = 0; - ata_pr_blacklisted(ap, slave); - } - } + + if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) { + if (verbose) + printk(KERN_ERR "ata%u: COMRESET failed " + "(device not ready)\n", ap->id); + else + DPRINTK("EXIT, device not ready\n"); + return -EIO; } - else if (shift == ATA_SHIFT_PIO) { - mask = ap->pio_mask; - if (ata_dev_present(master)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = master->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } - if (ata_dev_present(slave)) { - /* spec doesn't return explicit support for - * PIO0-2, so we fake it - */ - u16 tmp_mode = slave->id[ATA_ID_PIO_MODES] & 0x03; - tmp_mode <<= 3; - tmp_mode |= 0x7; - mask &= tmp_mode; - } + + ap->ops->dev_select(ap, 0); /* probably unnecessary */ + + *class = ata_dev_try_classify(ap, 0, NULL); + + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + +/** + * ata_std_postreset - standard postreset callback + * @ap: the target ata_port + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * This function is to be used as standard callback for + * ata_drive_*_reset(). + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_std_postreset(struct ata_port *ap, unsigned int *classes) +{ + DPRINTK("ENTER\n"); + + /* set cable type if it isn't already set */ + if (ap->cbl == ATA_CBL_NONE && ap->flags & ATA_FLAG_SATA) + ap->cbl = ATA_CBL_SATA; + + /* print link status */ + if (ap->cbl == ATA_CBL_SATA) + sata_print_link_status(ap); + + /* re-enable interrupts */ + if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */ + ata_irq_on(ap); + + /* is double-select really necessary? */ + if (classes[0] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 1); + if (classes[1] != ATA_DEV_NONE) + ap->ops->dev_select(ap, 0); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; } - else { - mask = 0xffffffff; /* shut up compiler warning */ - BUG(); + + /* set up device control */ + if (ap->ioaddr.ctl_addr) { + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ap->ioaddr.ctl_addr); + else + outb(ap->ctl, ap->ioaddr.ctl_addr); } - return mask; + DPRINTK("EXIT\n"); } -/* find greatest bit */ -static int fgb(u32 bitmap) +/** + * ata_std_probe_reset - standard probe reset method + * @ap: prot to perform probe-reset + * @classes: resulting classes of attached devices + * + * The stock off-the-shelf ->probe_reset method. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes) { - unsigned int i; - int x = -1; + ata_reset_fn_t hardreset; + + hardreset = NULL; + if (ap->flags & ATA_FLAG_SATA && ap->ops->scr_read) + hardreset = sata_std_hardreset; - for (i = 0; i < 32; i++) - if (bitmap & (1 << i)) - x = i; + return ata_drive_probe_reset(ap, ata_std_probeinit, + ata_std_softreset, hardreset, + ata_std_postreset, classes); +} + +static int do_probe_reset(struct ata_port *ap, ata_reset_fn_t reset, + ata_postreset_fn_t postreset, + unsigned int *classes) +{ + int i, rc; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + classes[i] = ATA_DEV_UNKNOWN; + + rc = reset(ap, 0, classes); + if (rc) + return rc; + + /* If any class isn't ATA_DEV_UNKNOWN, consider classification + * is complete and convert all ATA_DEV_UNKNOWN to + * ATA_DEV_NONE. + */ + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] != ATA_DEV_UNKNOWN) + break; + + if (i < ATA_MAX_DEVICES) + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (classes[i] == ATA_DEV_UNKNOWN) + classes[i] = ATA_DEV_NONE; + + if (postreset) + postreset(ap, classes); - return x; + return classes[0] != ATA_DEV_UNKNOWN ? 0 : -ENODEV; } /** - * ata_choose_xfer_mode - attempt to find best transfer mode - * @ap: Port for which an xfer mode will be selected - * @xfer_mode_out: (output) SET FEATURES - XFER MODE code - * @xfer_shift_out: (output) bit shift that selects this mode + * ata_drive_probe_reset - Perform probe reset with given methods + * @ap: port to reset + * @probeinit: probeinit method (can be NULL) + * @softreset: softreset method (can be NULL) + * @hardreset: hardreset method (can be NULL) + * @postreset: postreset method (can be NULL) + * @classes: resulting classes of attached devices + * + * Reset the specified port and classify attached devices using + * given methods. This function prefers softreset but tries all + * possible reset sequences to reset and classify devices. This + * function is intended to be used for constructing ->probe_reset + * callback by low level drivers. + * + * Reset methods should follow the following rules. + * + * - Return 0 on sucess, -errno on failure. + * - If classification is supported, fill classes[] with + * recognized class codes. + * - If classification is not supported, leave classes[] alone. + * - If verbose is non-zero, print error message on failure; + * otherwise, shut up. * - * Based on host and device capabilities, determine the - * maximum transfer mode that is amenable to all. + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, -EINVAL if no reset method is avaliable, -ENODEV + * if classification fails, and any error code from reset + * methods. + */ +int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit, + ata_reset_fn_t softreset, ata_reset_fn_t hardreset, + ata_postreset_fn_t postreset, unsigned int *classes) +{ + int rc = -EINVAL; + + if (probeinit) + probeinit(ap); + + if (softreset) { + rc = do_probe_reset(ap, softreset, postreset, classes); + if (rc == 0) + return 0; + } + + if (!hardreset) + return rc; + + rc = do_probe_reset(ap, hardreset, postreset, classes); + if (rc == 0 || rc != -ENODEV) + return rc; + + if (softreset) + rc = do_probe_reset(ap, softreset, postreset, classes); + + return rc; +} + +/** + * ata_dev_same_device - Determine whether new ID matches configured device + * @ap: port on which the device to compare against resides + * @dev: device to compare against + * @new_class: class of the new device + * @new_id: IDENTIFY page of the new device + * + * Compare @new_class and @new_id against @dev and determine + * whether @dev is the device indicated by @new_class and + * @new_id. * * LOCKING: - * PCI/etc. bus probe sem. + * None. + * + * RETURNS: + * 1 if @dev matches @new_class and @new_id, 0 otherwise. + */ +static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev, + unsigned int new_class, const u16 *new_id) +{ + const u16 *old_id = dev->id; + unsigned char model[2][41], serial[2][21]; + u64 new_n_sectors; + + if (dev->class != new_class) { + printk(KERN_INFO + "ata%u: dev %u class mismatch %d != %d\n", + ap->id, dev->devno, dev->class, new_class); + return 0; + } + + ata_id_c_string(old_id, model[0], ATA_ID_PROD_OFS, sizeof(model[0])); + ata_id_c_string(new_id, model[1], ATA_ID_PROD_OFS, sizeof(model[1])); + ata_id_c_string(old_id, serial[0], ATA_ID_SERNO_OFS, sizeof(serial[0])); + ata_id_c_string(new_id, serial[1], ATA_ID_SERNO_OFS, sizeof(serial[1])); + new_n_sectors = ata_id_n_sectors(new_id); + + if (strcmp(model[0], model[1])) { + printk(KERN_INFO + "ata%u: dev %u model number mismatch '%s' != '%s'\n", + ap->id, dev->devno, model[0], model[1]); + return 0; + } + + if (strcmp(serial[0], serial[1])) { + printk(KERN_INFO + "ata%u: dev %u serial number mismatch '%s' != '%s'\n", + ap->id, dev->devno, serial[0], serial[1]); + return 0; + } + + if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) { + printk(KERN_INFO + "ata%u: dev %u n_sectors mismatch %llu != %llu\n", + ap->id, dev->devno, (unsigned long long)dev->n_sectors, + (unsigned long long)new_n_sectors); + return 0; + } + + return 1; +} + +/** + * ata_dev_revalidate - Revalidate ATA device + * @ap: port on which the device to revalidate resides + * @dev: device to revalidate + * @post_reset: is this revalidation after reset? + * + * Re-read IDENTIFY page and make sure @dev is still attached to + * the port. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, negative errno otherwise + */ +int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev, + int post_reset) +{ + unsigned int class; + u16 *id; + int rc; + + if (!ata_dev_present(dev)) + return -ENODEV; + + class = dev->class; + id = NULL; + + /* allocate & read ID data */ + rc = ata_dev_read_id(ap, dev, &class, post_reset, &id); + if (rc) + goto fail; + + /* is the device still there? */ + if (!ata_dev_same_device(ap, dev, class, id)) { + rc = -ENODEV; + goto fail; + } + + kfree(dev->id); + dev->id = id; + + /* configure device according to the new ID */ + return ata_dev_configure(ap, dev, 0); + + fail: + printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n", + ap->id, dev->devno, rc); + kfree(id); + return rc; +} + +static const char * const ata_dma_blacklist [] = { + "WDC AC11000H", NULL, + "WDC AC22100H", NULL, + "WDC AC32500H", NULL, + "WDC AC33100H", NULL, + "WDC AC31600H", NULL, + "WDC AC32100H", "24.09P07", + "WDC AC23200L", "21.10N21", + "Compaq CRD-8241B", NULL, + "CRD-8400B", NULL, + "CRD-8480B", NULL, + "CRD-8482B", NULL, + "CRD-84", NULL, + "SanDisk SDP3B", NULL, + "SanDisk SDP3B-64", NULL, + "SANYO CD-ROM CRD", NULL, + "HITACHI CDR-8", NULL, + "HITACHI CDR-8335", NULL, + "HITACHI CDR-8435", NULL, + "Toshiba CD-ROM XM-6202B", NULL, + "TOSHIBA CD-ROM XM-1702BC", NULL, + "CD-532E-A", NULL, + "E-IDE CD-ROM CR-840", NULL, + "CD-ROM Drive/F5A", NULL, + "WPI CDD-820", NULL, + "SAMSUNG CD-ROM SC-148C", NULL, + "SAMSUNG CD-ROM SC", NULL, + "SanDisk SDP3B-64", NULL, + "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL, + "_NEC DV5800A", NULL, + "SAMSUNG CD-ROM SN-124", "N001" +}; + +static int ata_strim(char *s, size_t len) +{ + len = strnlen(s, len); + + /* ATAPI specifies that empty space is blank-filled; remove blanks */ + while ((len > 0) && (s[len - 1] == ' ')) { + len--; + s[len] = 0; + } + return len; +} + +static int ata_dma_blacklisted(const struct ata_device *dev) +{ + unsigned char model_num[40]; + unsigned char model_rev[16]; + unsigned int nlen, rlen; + int i; + + ata_id_string(dev->id, model_num, ATA_ID_PROD_OFS, + sizeof(model_num)); + ata_id_string(dev->id, model_rev, ATA_ID_FW_REV_OFS, + sizeof(model_rev)); + nlen = ata_strim(model_num, sizeof(model_num)); + rlen = ata_strim(model_rev, sizeof(model_rev)); + + for (i = 0; i < ARRAY_SIZE(ata_dma_blacklist); i += 2) { + if (!strncmp(ata_dma_blacklist[i], model_num, nlen)) { + if (ata_dma_blacklist[i+1] == NULL) + return 1; + if (!strncmp(ata_dma_blacklist[i], model_rev, rlen)) + return 1; + } + } + return 0; +} + +/** + * ata_dev_xfermask - Compute supported xfermask of the given device + * @ap: Port on which the device to compute xfermask for resides + * @dev: Device to compute xfermask for + * + * Compute supported xfermask of @dev and store it in + * dev->*_mask. This function is responsible for applying all + * known limits including host controller limits, device + * blacklist, etc... * - * RETURNS: - * Zero on success, negative on error. + * LOCKING: + * None. */ - -static int ata_choose_xfer_mode(const struct ata_port *ap, - u8 *xfer_mode_out, - unsigned int *xfer_shift_out) +static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev) { - unsigned int mask, shift; - int x, i; + unsigned long xfer_mask; + int i; - for (i = 0; i < ARRAY_SIZE(xfer_mode_classes); i++) { - shift = xfer_mode_classes[i].shift; - mask = ata_get_mode_mask(ap, shift); + xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask, + ap->udma_mask); - x = fgb(mask); - if (x >= 0) { - *xfer_mode_out = xfer_mode_classes[i].base + x; - *xfer_shift_out = shift; - return 0; - } + /* use port-wide xfermask for now */ + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *d = &ap->device[i]; + if (!ata_dev_present(d)) + continue; + xfer_mask &= ata_pack_xfermask(d->pio_mask, d->mwdma_mask, + d->udma_mask); + xfer_mask &= ata_id_xfermask(d->id); + if (ata_dma_blacklisted(d)) + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); } - return -1; + if (ata_dma_blacklisted(dev)) + printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, " + "disabling DMA\n", ap->id, dev->devno); + + ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask, + &dev->udma_mask); } /** @@ -2394,11 +2685,16 @@ static int ata_choose_xfer_mode(const struct ata_port *ap, * * LOCKING: * PCI/etc. bus probe sem. + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. */ -static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) +static unsigned int ata_dev_set_xfermode(struct ata_port *ap, + struct ata_device *dev) { struct ata_taskfile tf; + unsigned int err_mask; /* set up set-features taskfile */ DPRINTK("set features - xfer mode\n"); @@ -2410,54 +2706,10 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) tf.protocol = ATA_PROT_NODATA; tf.nsect = dev->xfer_mode; - if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { - printk(KERN_ERR "ata%u: failed to set xfermode, disabled\n", - ap->id); - ata_port_disable(ap); - } - - DPRINTK("EXIT\n"); -} - -/** - * ata_dev_reread_id - Reread the device identify device info - * @ap: port where the device is - * @dev: device to reread the identify device info - * - * LOCKING: - */ - -static void ata_dev_reread_id(struct ata_port *ap, struct ata_device *dev) -{ - struct ata_taskfile tf; - - ata_tf_init(ap, &tf, dev->devno); - - if (dev->class == ATA_DEV_ATA) { - tf.command = ATA_CMD_ID_ATA; - DPRINTK("do ATA identify\n"); - } else { - tf.command = ATA_CMD_ID_ATAPI; - DPRINTK("do ATAPI identify\n"); - } - - tf.flags |= ATA_TFLAG_DEVICE; - tf.protocol = ATA_PROT_PIO; - - if (ata_exec_internal(ap, dev, &tf, DMA_FROM_DEVICE, - dev->id, sizeof(dev->id))) - goto err_out; - - swap_buf_le16(dev->id, ATA_ID_WORDS); - - ata_dump_id(dev); - - DPRINTK("EXIT\n"); + err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); - return; -err_out: - printk(KERN_ERR "ata%u: failed to reread ID, disabled\n", ap->id); - ata_port_disable(ap); + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; } /** @@ -2466,17 +2718,23 @@ err_out: * @dev: Device to which command will be sent * * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * 0 on success, AC_ERR_* mask otherwise. */ -static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +static unsigned int ata_dev_init_params(struct ata_port *ap, + struct ata_device *dev) { struct ata_taskfile tf; + unsigned int err_mask; u16 sectors = dev->id[6]; u16 heads = dev->id[3]; /* Number of sectors per track 1-255. Number of heads 1-16 */ if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) - return; + return 0; /* set up init dev params taskfile */ DPRINTK("init dev params \n"); @@ -2488,13 +2746,10 @@ static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) tf.nsect = sectors; tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ - if (ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0)) { - printk(KERN_ERR "ata%u: failed to init parameters, disabled\n", - ap->id); - ata_port_disable(ap); - } + err_mask = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); - DPRINTK("EXIT\n"); + DPRINTK("EXIT, err_mask=%x\n", err_mask); + return err_mask; } /** @@ -2514,11 +2769,11 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) int dir = qc->dma_dir; void *pad_buf = NULL; - assert(qc->flags & ATA_QCFLAG_DMAMAP); - assert(sg != NULL); + WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP)); + WARN_ON(sg == NULL); if (qc->flags & ATA_QCFLAG_SINGLE) - assert(qc->n_elem <= 1); + WARN_ON(qc->n_elem > 1); VPRINTK("unmapping %u sg elements\n", qc->n_elem); @@ -2531,7 +2786,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) if (qc->flags & ATA_QCFLAG_SG) { if (qc->n_elem) - dma_unmap_sg(ap->host_set->dev, sg, qc->n_elem, dir); + dma_unmap_sg(ap->dev, sg, qc->n_elem, dir); /* restore last sg */ sg[qc->orig_n_elem - 1].length += qc->pad_len; if (pad_buf) { @@ -2542,7 +2797,7 @@ static void ata_sg_clean(struct ata_queued_cmd *qc) } } else { if (qc->n_elem) - dma_unmap_single(ap->host_set->dev, + dma_unmap_single(ap->dev, sg_dma_address(&sg[0]), sg_dma_len(&sg[0]), dir); /* restore sg */ @@ -2573,8 +2828,8 @@ static void ata_fill_sg(struct ata_queued_cmd *qc) struct scatterlist *sg; unsigned int idx; - assert(qc->__sg != NULL); - assert(qc->n_elem > 0 || qc->pad_len > 0); + WARN_ON(qc->__sg == NULL); + WARN_ON(qc->n_elem == 0 && qc->pad_len == 0); idx = 0; ata_for_each_sg(sg, qc) { @@ -2648,6 +2903,8 @@ void ata_qc_prep(struct ata_queued_cmd *qc) ata_fill_sg(qc); } +void ata_noop_qc_prep(struct ata_queued_cmd *qc) { } + /** * ata_sg_init_one - Associate command with memory buffer * @qc: Command to be associated @@ -2727,7 +2984,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) void *pad_buf = ap->pad + (qc->tag * ATA_DMA_PAD_SZ); struct scatterlist *psg = &qc->pad_sgent; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2751,7 +3008,7 @@ static int ata_sg_setup_one(struct ata_queued_cmd *qc) goto skip_map; } - dma_address = dma_map_single(ap->host_set->dev, qc->buf_virt, + dma_address = dma_map_single(ap->dev, qc->buf_virt, sg->length, dir); if (dma_mapping_error(dma_address)) { /* restore sg */ @@ -2791,7 +3048,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) int n_elem, pre_n_elem, dir, trim_sg = 0; VPRINTK("ENTER, ata%u\n", ap->id); - assert(qc->flags & ATA_QCFLAG_SG); + WARN_ON(!(qc->flags & ATA_QCFLAG_SG)); /* we must lengthen transfers to end on a 32-bit boundary */ qc->pad_len = lsg->length & 3; @@ -2800,7 +3057,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) struct scatterlist *psg = &qc->pad_sgent; unsigned int offset; - assert(qc->dev->class == ATA_DEV_ATAPI); + WARN_ON(qc->dev->class != ATA_DEV_ATAPI); memset(pad_buf, 0, ATA_DMA_PAD_SZ); @@ -2839,7 +3096,7 @@ static int ata_sg_setup(struct ata_queued_cmd *qc) } dir = qc->dma_dir; - n_elem = dma_map_sg(ap->host_set->dev, sg, pre_n_elem, dir); + n_elem = dma_map_sg(ap->dev, sg, pre_n_elem, dir); if (n_elem < 1) { /* restore last sg */ lsg->length += qc->pad_len; @@ -2869,14 +3126,13 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc) unsigned long flags; spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; ata_irq_on(ap); ata_qc_complete(qc); spin_unlock_irqrestore(&ap->host_set->lock, flags); } /** - * ata_pio_poll - + * ata_pio_poll - poll using PIO, depending on current state * @ap: the target ata_port * * LOCKING: @@ -2894,7 +3150,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) unsigned int reg_state = HSM_ST_UNKNOWN; qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); switch (ap->hsm_task_state) { case HSM_ST: @@ -2915,7 +3171,7 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_TIMEOUT; ap->hsm_task_state = HSM_ST_TMOUT; return 0; } @@ -2935,7 +3191,8 @@ static unsigned long ata_pio_poll(struct ata_port *ap) * None. (executing in kernel thread context) * * RETURNS: - * Non-zero if qc completed, zero otherwise. + * Zero if qc completed. + * Non-zero if has next. */ static int ata_pio_complete (struct ata_port *ap) @@ -2948,7 +3205,7 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * HSM_ST_POLL state. + * HSM_ST_LAST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY, 10); if (drv_stat & ATA_BUSY) { @@ -2957,33 +3214,33 @@ static int ata_pio_complete (struct ata_port *ap) if (drv_stat & ATA_BUSY) { ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; - return 0; + return 1; } } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { qc->err_mask |= __ac_err_mask(drv_stat); ap->hsm_task_state = HSM_ST_ERR; - return 0; + return 1; } ap->hsm_task_state = HSM_ST_IDLE; - assert(qc->err_mask == 0); + WARN_ON(qc->err_mask); ata_poll_qc_complete(qc); /* another command may start at this point */ - return 1; + return 0; } /** - * swap_buf_le16 - swap halves of 16-words in place + * swap_buf_le16 - swap halves of 16-bit words in place * @buf: Buffer to swap * @buf_words: Number of 16-bit words in buffer. * @@ -3150,7 +3407,23 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - buf = kmap(page) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ata_data_xfer(ap, buf + offset, ATA_SECT_SIZE, do_write); + } qc->cursect++; qc->cursg_ofs++; @@ -3159,14 +3432,153 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) qc->cursg++; qc->cursg_ofs = 0; } +} - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); +/** + * ata_pio_sectors - Transfer one or many 512-byte sectors. + * @qc: Command on going + * + * Transfer one or many ATA_SECT_SIZE of data from/to the + * ATA device for the DRQ request. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_pio_sectors(struct ata_queued_cmd *qc) +{ + if (is_multi_taskfile(&qc->tf)) { + /* READ/WRITE MULTIPLE */ + unsigned int nsect; + + WARN_ON(qc->dev->multi_count == 0); + + nsect = min(qc->nsect - qc->cursect, qc->dev->multi_count); + while (nsect--) + ata_pio_sector(qc); + } else + ata_pio_sector(qc); +} + +/** + * atapi_send_cdb - Write CDB bytes to hardware + * @ap: Port to which ATAPI device is attached. + * @qc: Taskfile currently active + * + * When device has indicated its readiness to accept + * a CDB, this function is called. Send the CDB. + * + * LOCKING: + * caller. + */ + +static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) +{ + /* send SCSI cdb */ + DPRINTK("send cdb\n"); + WARN_ON(qc->dev->cdb_len < 12); + + ata_data_xfer(ap, qc->cdb, qc->dev->cdb_len, 1); + ata_altstatus(ap); /* flush */ + + switch (qc->tf.protocol) { + case ATA_PROT_ATAPI: + ap->hsm_task_state = HSM_ST; + break; + case ATA_PROT_ATAPI_NODATA: + ap->hsm_task_state = HSM_ST_LAST; + break; + case ATA_PROT_ATAPI_DMA: + ap->hsm_task_state = HSM_ST_LAST; + /* initiate bmdma */ + ap->ops->bmdma_start(qc); + break; + } +} + +/** + * ata_pio_first_block - Write first data block to hardware + * @ap: Port to which ATA/ATAPI device is attached. + * + * When device has indicated its readiness to accept + * the data, this function sends out the CDB or + * the first data block by PIO. + * After this, + * - If polling, ata_pio_task() handles the rest. + * - Otherwise, interrupt handler takes over. + * + * LOCKING: + * Kernel thread context (may sleep) + * + * RETURNS: + * Zero if irq handler takes over + * Non-zero if has next (polling). + */ + +static int ata_pio_first_block(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + u8 status; + unsigned long flags; + int has_next; + + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* if polling, we will stay in the work queue after sending the data. + * otherwise, interrupt handler takes over after sending the data. + */ + has_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* sleep-wait for BSY to clear */ + DPRINTK("busy wait\n"); + if (ata_busy_sleep(ap, ATA_TMOUT_DATAOUT_QUICK, ATA_TMOUT_DATAOUT)) { + qc->err_mask |= AC_ERR_TIMEOUT; + ap->hsm_task_state = HSM_ST_TMOUT; + goto err_out; + } + + /* make sure DRQ is set */ + status = ata_chk_status(ap); + if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { + /* device status error */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto err_out; + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state to HSM_ST_LAST. + * so, the state is changed here before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + spin_unlock_irqrestore(&ap->host_set->lock, flags); - /* do the actual data transfer */ - do_write = (qc->tf.flags & ATA_TFLAG_WRITE); - ata_data_xfer(ap, buf, ATA_SECT_SIZE, do_write); + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + return has_next; - kunmap(page); +err_out: + return 1; /* has next */ } /** @@ -3232,7 +3644,23 @@ next_sg: /* don't cross page boundaries */ count = min(count, (unsigned int)PAGE_SIZE - offset); - buf = kmap(page) + offset; + DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); + + if (PageHighMem(page)) { + unsigned long flags; + + local_irq_save(flags); + buf = kmap_atomic(page, KM_IRQ0); + + /* do the actual data transfer */ + ata_data_xfer(ap, buf + offset, count, do_write); + + kunmap_atomic(buf, KM_IRQ0); + local_irq_restore(flags); + } else { + buf = page_address(page); + ata_data_xfer(ap, buf + offset, count, do_write); + } bytes -= count; qc->curbytes += count; @@ -3243,13 +3671,6 @@ next_sg: qc->cursg_ofs = 0; } - DPRINTK("data %s\n", qc->tf.flags & ATA_TFLAG_WRITE ? "write" : "read"); - - /* do the actual data transfer */ - ata_data_xfer(ap, buf, count, do_write); - - kunmap(page); - if (bytes) goto next_sg; } @@ -3286,6 +3707,8 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (do_write != i_write) goto err_out; + VPRINTK("ata%u: xfering %d bytes\n", ap->id, bytes); + __atapi_pio_bytes(qc, bytes); return; @@ -3293,7 +3716,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - qc->err_mask |= AC_ERR_ATA_BUS; + qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; } @@ -3330,7 +3753,7 @@ static void ata_pio_block(struct ata_port *ap) } qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + WARN_ON(qc == NULL); /* check error */ if (status & (ATA_ERR | ATA_DF)) { @@ -3339,83 +3762,264 @@ static void ata_pio_block(struct ata_port *ap) return; } - /* transfer data if any */ - if (is_atapi_taskfile(&qc->tf)) { - /* DRQ=0 means no more data to transfer */ - if ((status & ATA_DRQ) == 0) { - ap->hsm_task_state = HSM_ST_LAST; - return; + /* transfer data if any */ + if (is_atapi_taskfile(&qc->tf)) { + /* DRQ=0 means no more data to transfer */ + if ((status & ATA_DRQ) == 0) { + ap->hsm_task_state = HSM_ST_LAST; + return; + } + + atapi_pio_bytes(qc); + } else { + /* handle BSY=0, DRQ=0 as error */ + if ((status & ATA_DRQ) == 0) { + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + return; + } + + ata_pio_sectors(qc); + } + + ata_altstatus(ap); /* flush */ +} + +static void ata_pio_error(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); + + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_WARNING "ata%u: PIO error\n", ap->id); + + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + ata_poll_qc_complete(qc); +} + +/** + * ata_hsm_move - move the HSM to the next state. + * @ap: the target ata_port + * @qc: qc on going + * @status: current device status + * @in_wq: 1 if called from workqueue, 0 otherwise + * + * RETURNS: + * 1 when poll next status needed, 0 otherwise. + */ + +static int ata_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, + u8 status, int in_wq) +{ + unsigned long flags = 0; + int poll_next; + + WARN_ON((qc->flags & ATA_QCFLAG_ACTIVE) == 0); + + /* Make sure ata_qc_issue_prot() does not throw things + * like DMA polling into the workqueue. Notice that + * in_wq is not equivalent to (qc->tf.flags & ATA_TFLAG_POLLING). + */ + WARN_ON(in_wq != ((qc->tf.flags & ATA_TFLAG_POLLING) || + (ap->hsm_task_state == HSM_ST_FIRST && + ((qc->tf.protocol == ATA_PROT_PIO && + (qc->tf.flags & ATA_TFLAG_WRITE)) || + (is_atapi_taskfile(&qc->tf) && + !(qc->dev->flags & ATA_DFLAG_CDB_INTR)))))); + + /* check error */ + if (unlikely(status & (ATA_ERR | ATA_DF))) { + qc->err_mask |= AC_ERR_DEV; + ap->hsm_task_state = HSM_ST_ERR; + } + +fsm_start: + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Send first data block or PACKET CDB */ + + /* If polling, we will stay in the work queue after + * sending the data. Otherwise, interrupt handler + * takes over after sending the data. + */ + poll_next = (qc->tf.flags & ATA_TFLAG_POLLING); + + /* check device status */ + if (unlikely((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ)) { + /* Wrong status. Let EH handle this */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + /* Send the CDB (atapi) or the first data block (ata pio out). + * During the state transition, interrupt handler shouldn't + * be invoked before the data transfer is complete and + * hsm_task_state is changed. Hence, the following locking. + */ + if (in_wq) + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (qc->tf.protocol == ATA_PROT_PIO) { + /* PIO data out protocol. + * send first data block. + */ + + /* ata_pio_sectors() might change the state + * to HSM_ST_LAST. so, the state is changed here + * before ata_pio_sectors(). + */ + ap->hsm_task_state = HSM_ST; + ata_pio_sectors(qc); + ata_altstatus(ap); /* flush */ + } else + /* send CDB */ + atapi_send_cdb(ap, qc); + + if (in_wq) + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + break; + + case HSM_ST: + /* complete command or read/write the data register */ + if (qc->tf.protocol == ATA_PROT_ATAPI) { + /* ATAPI PIO protocol */ + if ((status & ATA_DRQ) == 0) { + /* no more data to transfer */ + ap->hsm_task_state = HSM_ST_LAST; + goto fsm_start; + } + + atapi_pio_bytes(qc); + + if (unlikely(ap->hsm_task_state == HSM_ST_ERR)) + /* bad ireason reported by device */ + goto fsm_start; + + } else { + /* ATA PIO protocol */ + if (unlikely((status & ATA_DRQ) == 0)) { + /* handle BSY=0, DRQ=0 as error */ + qc->err_mask |= AC_ERR_HSM; + ap->hsm_task_state = HSM_ST_ERR; + goto fsm_start; + } + + ata_pio_sectors(qc); + + if (ap->hsm_task_state == HSM_ST_LAST && + (!(qc->tf.flags & ATA_TFLAG_WRITE))) { + /* all data read */ + ata_altstatus(ap); + status = ata_chk_status(ap); + goto fsm_start; + } } - atapi_pio_bytes(qc); - } else { - /* handle BSY=0, DRQ=0 as error */ - if ((status & ATA_DRQ) == 0) { - qc->err_mask |= AC_ERR_ATA_BUS; + ata_altstatus(ap); /* flush */ + poll_next = 1; + break; + + case HSM_ST_LAST: + if (unlikely(!ata_ok(status))) { + qc->err_mask |= __ac_err_mask(status); ap->hsm_task_state = HSM_ST_ERR; - return; + goto fsm_start; } - ata_pio_sector(qc); - } -} + /* no more data to transfer */ + DPRINTK("ata%u: command complete, drv_stat 0x%x\n", + ap->id, status); -static void ata_pio_error(struct ata_port *ap) -{ - struct ata_queued_cmd *qc; + WARN_ON(qc->err_mask); - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); + ap->hsm_task_state = HSM_ST_IDLE; - if (qc->tf.command != ATA_CMD_PACKET) - printk(KERN_WARNING "ata%u: PIO error\n", ap->id); + /* complete taskfile transaction */ + if (in_wq) + ata_poll_qc_complete(qc); + else + ata_qc_complete(qc); - /* make sure qc->err_mask is available to - * know what's wrong and recover - */ - assert(qc->err_mask); + poll_next = 0; + break; - ap->hsm_task_state = HSM_ST_IDLE; + case HSM_ST_ERR: + if (qc->tf.command != ATA_CMD_PACKET) + printk(KERN_ERR "ata%u: command error, drv_stat 0x%x\n", + ap->id, status); - ata_poll_qc_complete(qc); + /* make sure qc->err_mask is available to + * know what's wrong and recover + */ + WARN_ON(qc->err_mask == 0); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (in_wq) + ata_poll_qc_complete(qc); + else + ata_qc_complete(qc); + + poll_next = 0; + break; + default: + poll_next = 0; + BUG(); + } + + return poll_next; } static void ata_pio_task(void *_data) { struct ata_port *ap = _data; - unsigned long timeout; - int qc_completed; + struct ata_queued_cmd *qc; + u8 status; + int poll_next; fsm_start: - timeout = 0; - qc_completed = 0; - - switch (ap->hsm_task_state) { - case HSM_ST_IDLE: - return; - - case HSM_ST: - ata_pio_block(ap); - break; + WARN_ON(ap->hsm_task_state == HSM_ST_IDLE); - case HSM_ST_LAST: - qc_completed = ata_pio_complete(ap); - break; - - case HSM_ST_POLL: - case HSM_ST_LAST_POLL: - timeout = ata_pio_poll(ap); - break; + qc = ata_qc_from_tag(ap, ap->active_tag); + WARN_ON(qc == NULL); - case HSM_ST_TMOUT: - case HSM_ST_ERR: - ata_pio_error(ap); - return; + /* + * This is purely heuristic. This is a fast path. + * Sometimes when we enter, BSY will be cleared in + * a chk-status or two. If not, the drive is probably seeking + * or something. Snooze for a couple msecs, then + * chk-status again. If still busy, queue delayed work. + */ + status = ata_busy_wait(ap, ATA_BUSY, 5); + if (status & ATA_BUSY) { + msleep(2); + status = ata_busy_wait(ap, ATA_BUSY, 10); + if (status & ATA_BUSY) { + ata_port_queue_task(ap, ata_pio_task, ap, ATA_SHORT_PAUSE); + return; + } } - if (timeout) - queue_delayed_work(ata_wq, &ap->pio_task, timeout); - else if (!qc_completed) + /* move the HSM */ + poll_next = ata_hsm_move(ap, qc, status, 1); + + /* another command or interrupt handler + * may be running at this point. + */ + if (poll_next) goto fsm_start; } @@ -3447,15 +4051,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) DPRINTK("ENTER\n"); - spin_lock_irqsave(&host_set->lock, flags); + ap->hsm_task_state = HSM_ST_IDLE; - /* hack alert! We cannot use the supplied completion - * function from inside the ->eh_strategy_handler() thread. - * libata is the only user of ->eh_strategy_handler() in - * any kernel, so the default scsi_done() assumes it is - * not being called from the SCSI EH. - */ - qc->scsidone = scsi_finish_command; + spin_lock_irqsave(&host_set->lock, flags); switch (qc->tf.protocol) { @@ -3478,14 +4076,17 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n", ap->id, qc->tf.command, drv_stat, host_stat); + ap->hsm_task_state = HSM_ST_IDLE; + /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(drv_stat); - ata_qc_complete(qc); + qc->err_mask |= AC_ERR_TIMEOUT; break; } spin_unlock_irqrestore(&host_set->lock, flags); + ata_eh_qc_complete(qc); + DPRINTK("EXIT\n"); } @@ -3510,20 +4111,10 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc) void ata_eng_timeout(struct ata_port *ap) { - struct ata_queued_cmd *qc; - DPRINTK("ENTER\n"); - qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc) - ata_qc_timeout(qc); - else { - printk(KERN_ERR "ata%u: BUG: timeout without command\n", - ap->id); - goto out; - } + ata_qc_timeout(ata_qc_from_tag(ap, ap->active_tag)); -out: DPRINTK("EXIT\n"); } @@ -3579,21 +4170,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static void __ata_qc_complete(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - if (tag == ap->active_tag) - ap->active_tag = ATA_TAG_POISON; - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qactive); - } -} - /** * ata_qc_free - free unused ata_queued_cmd * @qc: Command to complete @@ -3606,29 +4182,25 @@ static void __ata_qc_complete(struct ata_queued_cmd *qc) */ void ata_qc_free(struct ata_queued_cmd *qc) { - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ + struct ata_port *ap = qc->ap; + unsigned int tag; - __ata_qc_complete(qc); -} + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ -/** - * ata_qc_complete - Complete an active ATA command - * @qc: Command to complete - * @err_mask: ATA Status register contents - * - * Indicate to the mid and upper layers that an ATA - * command has completed, with either an ok or not-ok status. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ + qc->flags = 0; + tag = qc->tag; + if (likely(ata_tag_valid(tag))) { + if (tag == ap->active_tag) + ap->active_tag = ATA_TAG_POISON; + qc->tag = ATA_TAG_POISON; + clear_bit(tag, &ap->qactive); + } +} -void ata_qc_complete(struct ata_queued_cmd *qc) +void __ata_qc_complete(struct ata_queued_cmd *qc) { - int rc; - - assert(qc != NULL); /* ata_qc_from_tag _might_ return NULL */ - assert(qc->flags & ATA_QCFLAG_ACTIVE); + WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ + WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE)); if (likely(qc->flags & ATA_QCFLAG_DMAMAP)) ata_sg_clean(qc); @@ -3640,17 +4212,7 @@ void ata_qc_complete(struct ata_queued_cmd *qc) qc->flags &= ~ATA_QCFLAG_ACTIVE; /* call completion callback */ - rc = qc->complete_fn(qc); - - /* if callback indicates not to complete command (non-zero), - * return immediately - */ - if (rc != 0) - return; - - __ata_qc_complete(qc); - - VPRINTK("EXIT\n"); + qc->complete_fn(qc); } static inline int ata_should_dma_map(struct ata_queued_cmd *qc) @@ -3664,7 +4226,6 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) case ATA_PROT_ATAPI: case ATA_PROT_PIO: - case ATA_PROT_PIO_MULT: if (ap->flags & ATA_FLAG_PIO_DMA) return 1; @@ -3690,20 +4251,20 @@ static inline int ata_should_dma_map(struct ata_queued_cmd *qc) * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; if (ata_should_dma_map(qc)) { if (qc->flags & ATA_QCFLAG_SG) { if (ata_sg_setup(qc)) - goto err_out; + goto sg_err; } else if (qc->flags & ATA_QCFLAG_SINGLE) { if (ata_sg_setup_one(qc)) - goto err_out; + goto sg_err; } } else { qc->flags &= ~ATA_QCFLAG_DMAMAP; @@ -3716,8 +4277,9 @@ int ata_qc_issue(struct ata_queued_cmd *qc) return ap->ops->qc_issue(qc); -err_out: - return -1; +sg_err: + qc->flags &= ~ATA_QCFLAG_DMAMAP; + return AC_ERR_SYSTEM; } @@ -3736,289 +4298,119 @@ err_out: * spin_lock_irqsave(host_set lock) * * RETURNS: - * Zero on success, negative on error. + * Zero on success, AC_ERR_* mask on failure */ -int ata_qc_issue_prot(struct ata_queued_cmd *qc) +unsigned int ata_qc_issue_prot(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + /* Use polling pio if the LLD doesn't handle + * interrupt driven pio and atapi CDB interrupt. + */ + if (ap->flags & ATA_FLAG_PIO_POLLING) { + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + qc->tf.flags |= ATA_TFLAG_POLLING; + break; + case ATA_PROT_ATAPI_DMA: + if (qc->dev->flags & ATA_DFLAG_CDB_INTR) + BUG(); + break; + default: + break; + } + } + + /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); + /* start the command */ switch (qc->tf.protocol) { case ATA_PROT_NODATA: - ata_tf_to_host(ap, &qc->tf); - break; - - case ATA_PROT_DMA: - ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - break; + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); - case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ - ata_qc_set_polling(qc); ata_tf_to_host(ap, &qc->tf); - ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); - break; + ap->hsm_task_state = HSM_ST_LAST; - case ATA_PROT_ATAPI: - ata_qc_set_polling(qc); - ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); - break; + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, ap, 0); - case ATA_PROT_ATAPI_NODATA: - ap->flags |= ATA_FLAG_NOINTR; - ata_tf_to_host(ap, &qc->tf); - queue_work(ata_wq, &ap->packet_task); break; - case ATA_PROT_ATAPI_DMA: - ap->flags |= ATA_FLAG_NOINTR; + case ATA_PROT_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ ap->ops->bmdma_setup(qc); /* set up bmdma */ - queue_work(ata_wq, &ap->packet_task); + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; break; - default: - WARN_ON(1); - return -1; - } - - return 0; -} - -/** - * ata_bmdma_setup_mmio - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - writel(ap->prd_dma, mmio + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = readb(mmio + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - writeb(dmactl, mmio + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_mmio - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_mmio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = readb(mmio + ATA_DMA_CMD); - writeb(dmactl | ATA_DMA_START, mmio + ATA_DMA_CMD); - - /* Strictly, one may wish to issue a readb() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - */ -} - -/** - * ata_bmdma_setup_pio - Set up PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_setup_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - outl(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - outb(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->exec_command(ap, &qc->tf); -} - -/** - * ata_bmdma_start_pio - Start a PCI IDE BMDMA transaction (PIO) - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ - -static void ata_bmdma_start_pio (struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - outb(dmactl | ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); -} - - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes the ATA_DMA_START flag to the DMA command register. - * - * May be used as the bmdma_start() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_start_mmio(qc); - else - ata_bmdma_start_pio(qc); -} + case ATA_PROT_PIO: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); + ata_tf_to_host(ap, &qc->tf); -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * Writes address of PRD table to device's PRD Table Address - * register, sets the DMA control register, and calls - * ops->exec_command() to start the transfer. - * - * May be used as the bmdma_setup() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - if (qc->ap->flags & ATA_FLAG_MMIO) - ata_bmdma_setup_mmio(qc); - else - ata_bmdma_setup_pio(qc); -} + if (qc->tf.flags & ATA_TFLAG_WRITE) { + /* PIO data out protocol */ + ap->hsm_task_state = HSM_ST_FIRST; + ata_port_queue_task(ap, ata_pio_task, ap, 0); + /* always send first data block using + * the ata_pio_task() codepath. + */ + } else { + /* PIO data in protocol */ + ap->hsm_task_state = HSM_ST; -/** - * ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt. - * @ap: Port associated with this ATA transaction. - * - * Clear interrupt and error flags in DMA status register. - * - * May be used as the irq_clear() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_port_queue_task(ap, ata_pio_task, ap, 0); -void ata_bmdma_irq_clear(struct ata_port *ap) -{ - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = ((void __iomem *) ap->ioaddr.bmdma_addr) + ATA_DMA_STATUS; - writeb(readb(mmio), mmio); - } else { - unsigned long addr = ap->ioaddr.bmdma_addr + ATA_DMA_STATUS; - outb(inb(addr), addr); - } + /* if polling, ata_pio_task() handles the rest. + * otherwise, interrupt handler takes over from here. + */ + } -} + break; + case ATA_PROT_ATAPI: + case ATA_PROT_ATAPI_NODATA: + if (qc->tf.flags & ATA_TFLAG_POLLING) + ata_qc_set_polling(qc); -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ + ata_tf_to_host(ap, &qc->tf); -u8 ata_bmdma_status(struct ata_port *ap) -{ - u8 host_stat; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; - host_stat = readb(mmio + ATA_DMA_STATUS); - } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); - return host_stat; -} + ap->hsm_task_state = HSM_ST_FIRST; + /* send cdb by polling if no cdb interrupt */ + if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || + (qc->tf.flags & ATA_TFLAG_POLLING)) + ata_port_queue_task(ap, ata_pio_task, ap, 0); + break; -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host_set lock) - */ + case ATA_PROT_ATAPI_DMA: + WARN_ON(qc->tf.flags & ATA_TFLAG_POLLING); -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - if (ap->flags & ATA_FLAG_MMIO) { - void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; + ap->ops->tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; - /* clear start/stop bit */ - writeb(readb(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - } else { - /* clear start/stop bit */ - outb(inb(ap->ioaddr.bmdma_addr + ATA_DMA_CMD) & ~ATA_DMA_START, - ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_port_queue_task(ap, ata_pio_task, ap, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; } - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_altstatus(ap); /* dummy read */ + return 0; } /** @@ -4040,52 +4432,69 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) inline unsigned int ata_host_intr (struct ata_port *ap, struct ata_queued_cmd *qc) { - u8 status, host_stat; - - switch (qc->tf.protocol) { - - case ATA_PROT_DMA: - case ATA_PROT_ATAPI_DMA: - case ATA_PROT_ATAPI: - /* check status of DMA engine */ - host_stat = ap->ops->bmdma_status(ap); - VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); - - /* if it's not our irq... */ - if (!(host_stat & ATA_DMA_INTR)) - goto idle_irq; + u8 status, host_stat = 0; - /* before we do anything else, clear DMA-Start bit */ - ap->ops->bmdma_stop(qc); - - /* fall through */ + VPRINTK("ata%u: protocol %d task_state %d\n", + ap->id, qc->tf.protocol, ap->hsm_task_state); - case ATA_PROT_ATAPI_NODATA: - case ATA_PROT_NODATA: - /* check altstatus */ - status = ata_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; + /* Check whether we are expecting interrupt in this state */ + switch (ap->hsm_task_state) { + case HSM_ST_FIRST: + /* Some pre-ATAPI-4 devices assert INTRQ + * at this state when ready to receive CDB. + */ - /* check main status, clearing INTRQ */ - status = ata_chk_status(ap); - if (unlikely(status & ATA_BUSY)) + /* Check the ATA_DFLAG_CDB_INTR flag is enough here. + * The flag was turned on only for atapi devices. + * No need to check is_atapi_taskfile(&qc->tf) again. + */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) goto idle_irq; - DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n", - ap->id, qc->tf.protocol, status); - - /* ack bmdma irq events */ - ap->ops->irq_clear(ap); - - /* complete taskfile transaction */ - qc->err_mask |= ac_err_mask(status); - ata_qc_complete(qc); break; - + case HSM_ST_LAST: + if (qc->tf.protocol == ATA_PROT_DMA || + qc->tf.protocol == ATA_PROT_ATAPI_DMA) { + /* check status of DMA engine */ + host_stat = ap->ops->bmdma_status(ap); + VPRINTK("ata%u: host_stat 0x%X\n", ap->id, host_stat); + + /* if it's not our irq... */ + if (!(host_stat & ATA_DMA_INTR)) + goto idle_irq; + + /* before we do anything else, clear DMA-Start bit */ + ap->ops->bmdma_stop(qc); + + if (unlikely(host_stat & ATA_DMA_ERR)) { + /* error when transfering data to/from memory */ + qc->err_mask |= AC_ERR_HOST_BUS; + ap->hsm_task_state = HSM_ST_ERR; + } + } + break; + case HSM_ST: + break; default: goto idle_irq; } + /* check altstatus */ + status = ata_altstatus(ap); + if (status & ATA_BUSY) + goto idle_irq; + + /* check main status, clearing INTRQ */ + status = ata_chk_status(ap); + if (unlikely(status & ATA_BUSY)) + goto idle_irq; + + DPRINTK("ata%u: protocol %d task_state %d (dev_stat 0x%X)\n", + ap->id, qc->tf.protocol, ap->hsm_task_state, status); + + /* ack bmdma irq events */ + ap->ops->irq_clear(ap); + + ata_hsm_move(ap, qc, status, 0); return 1; /* irq handled */ idle_irq: @@ -4093,9 +4502,9 @@ idle_irq: #ifdef ATA_IRQ_TRAP if ((ap->stats.idle_irq % 1000) == 0) { - handled = 1; ata_irq_ack(ap, 0); /* debug trap */ printk(KERN_WARNING "ata%d: irq trap\n", ap->id); + return 1; } #endif return 0; /* irq not handled */ @@ -4132,11 +4541,11 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) ap = host_set->ports[i]; if (ap && - !(ap->flags & (ATA_FLAG_PORT_DISABLED | ATA_FLAG_NOINTR))) { + !(ap->flags & ATA_FLAG_PORT_DISABLED)) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (qc && (!(qc->tf.ctl & ATA_NIEN)) && + if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && (qc->flags & ATA_QCFLAG_ACTIVE)) handled |= ata_host_intr(ap, qc); } @@ -4147,91 +4556,6 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_RETVAL(handled); } -/** - * atapi_packet_task - Write CDB bytes to hardware - * @_data: Port to which ATAPI device is attached. - * - * When device has indicated its readiness to accept - * a CDB, this function is called. Send the CDB. - * If DMA is to be performed, exit immediately. - * Otherwise, we are in polling mode, so poll - * status under operation succeeds or fails. - * - * LOCKING: - * Kernel thread context (may sleep) - */ - -static void atapi_packet_task(void *_data) -{ - struct ata_port *ap = _data; - struct ata_queued_cmd *qc; - u8 status; - - qc = ata_qc_from_tag(ap, ap->active_tag); - assert(qc != NULL); - assert(qc->flags & ATA_QCFLAG_ACTIVE); - - /* sleep-wait for BSY to clear */ - DPRINTK("busy wait\n"); - if (ata_busy_sleep(ap, ATA_TMOUT_CDB_QUICK, ATA_TMOUT_CDB)) { - qc->err_mask |= AC_ERR_ATA_BUS; - goto err_out; - } - - /* make sure DRQ is set */ - status = ata_chk_status(ap); - if ((status & (ATA_BUSY | ATA_DRQ)) != ATA_DRQ) { - qc->err_mask |= AC_ERR_ATA_BUS; - goto err_out; - } - - /* send SCSI cdb */ - DPRINTK("send cdb\n"); - assert(ap->cdb_len >= 12); - - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA || - qc->tf.protocol == ATA_PROT_ATAPI_NODATA) { - unsigned long flags; - - /* Once we're done issuing command and kicking bmdma, - * irq handler takes over. To not lose irq, we need - * to clear NOINTR flag before sending cdb, but - * interrupt handler shouldn't be invoked before we're - * finished. Hence, the following locking. - */ - spin_lock_irqsave(&ap->host_set->lock, flags); - ap->flags &= ~ATA_FLAG_NOINTR; - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - if (qc->tf.protocol == ATA_PROT_ATAPI_DMA) - ap->ops->bmdma_start(qc); /* initiate bmdma */ - spin_unlock_irqrestore(&ap->host_set->lock, flags); - } else { - ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); - - /* PIO commands are handled by polling */ - ap->hsm_task_state = HSM_ST; - queue_work(ata_wq, &ap->pio_task); - } - - return; - -err_out: - ata_poll_qc_complete(qc); -} - - -/** - * ata_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ /* * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, @@ -4284,6 +4608,8 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) /** * ata_device_resume - wakeup a previously suspended devices + * @ap: port the device is connected to + * @dev: the device to resume * * Kick the drive back into action, by sending it an idle immediate * command and making sure its transfer mode matches between drive @@ -4306,26 +4632,41 @@ int ata_device_resume(struct ata_port *ap, struct ata_device *dev) /** * ata_device_suspend - prepare a device for suspend + * @ap: port the device is connected to + * @dev: the device to suspend * * Flush the cache on the drive, if appropriate, then issue a * standbynow command. - * */ -int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) +int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state) { if (!ata_dev_present(dev)) return 0; if (dev->class == ATA_DEV_ATA) ata_flush_cache(ap, dev); - ata_standby_drive(ap, dev); + if (state.event != PM_EVENT_FREEZE) + ata_standby_drive(ap, dev); ap->flags |= ATA_FLAG_SUSPENDED; return 0; } +/** + * ata_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + int ata_port_start (struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->dev; int rc; ap->prd = dma_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma, GFP_KERNEL); @@ -4358,7 +4699,7 @@ int ata_port_start (struct ata_port *ap) void ata_port_stop (struct ata_port *ap) { - struct device *dev = ap->host_set->dev; + struct device *dev = ap->dev; dma_free_coherent(dev, ATA_PRD_TBL_SZ, ap->prd, ap->prd_dma); ata_pad_free(ap, dev); @@ -4424,6 +4765,7 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->host = host; ap->ctl = ATA_DEVCTL_OBS; ap->host_set = host_set; + ap->dev = ent->dev; ap->port_no = port_no; ap->hard_port_no = ent->legacy_mode ? ent->hard_port_no : port_no; @@ -4436,11 +4778,16 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host, ap->active_tag = ATA_TAG_POISON; ap->last_ctl = 0xFF; - INIT_WORK(&ap->packet_task, atapi_packet_task, ap); - INIT_WORK(&ap->pio_task, ata_pio_task, ap); + INIT_WORK(&ap->port_task, NULL, NULL); + INIT_LIST_HEAD(&ap->eh_done_q); - for (i = 0; i < ATA_MAX_DEVICES; i++) - ap->device[i].devno = i; + for (i = 0; i < ATA_MAX_DEVICES; i++) { + struct ata_device *dev = &ap->device[i]; + dev->devno = i; + dev->pio_mask = UINT_MAX; + dev->mwdma_mask = UINT_MAX; + dev->udma_mask = UINT_MAX; + } #ifdef ATA_IRQ_TRAP ap->stats.unhandled_irq = 1; @@ -4474,10 +4821,20 @@ static struct ata_port * ata_host_add(const struct ata_probe_ent *ent, int rc; DPRINTK("ENTER\n"); + + if (!ent->port_ops->probe_reset && + !(ent->host_flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST))) { + printk(KERN_ERR "ata%u: no reset mechanism available\n", + port_no); + return NULL; + } + host = scsi_host_alloc(ent->sht, sizeof(struct ata_port)); if (!host) return NULL; + host->transportt = &ata_scsi_transport_template; + ap = (struct ata_port *) &host->hostdata[0]; ata_host_init(ap, host, host_set, ent, port_no); @@ -4579,9 +4936,9 @@ int ata_device_add(const struct ata_probe_ent *ent) ap = host_set->ports[i]; - DPRINTK("ata%u: probe begin\n", ap->id); + DPRINTK("ata%u: bus probe begin\n", ap->id); rc = ata_bus_probe(ap); - DPRINTK("ata%u: probe end\n", ap->id); + DPRINTK("ata%u: bus probe end\n", ap->id); if (rc) { /* FIXME: do something useful here? @@ -4605,7 +4962,7 @@ int ata_device_add(const struct ata_probe_ent *ent) } /* probes are done, now scan each port's disk(s) */ - DPRINTK("probe begin\n"); + DPRINTK("host probe begin\n"); for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; @@ -4632,7 +4989,7 @@ err_free_ret: * ata_host_set_remove - PCI layer callback for device removal * @host_set: ATA host set that was removed * - * Unregister all objects associated with this host set. Free those + * Unregister all objects associated with this host set. Free those * objects. * * LOCKING: @@ -4691,11 +5048,14 @@ void ata_host_set_remove(struct ata_host_set *host_set) int ata_scsi_release(struct Scsi_Host *host) { struct ata_port *ap = (struct ata_port *) &host->hostdata[0]; + int i; DPRINTK("ENTER\n"); ap->ops->port_disable(ap); ata_host_remove(ap, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) + kfree(ap->device[i].id); DPRINTK("EXIT\n"); return 1; @@ -4727,32 +5087,6 @@ void ata_std_ports(struct ata_ioports *ioaddr) ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD; } -static struct ata_probe_ent * -ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL); - if (!probe_ent) { - printk(KERN_ERR DRV_NAME "(%s): out of memory\n", - kobject_name(&(dev->kobj))); - return NULL; - } - - INIT_LIST_HEAD(&probe_ent->node); - probe_ent->dev = dev; - - probe_ent->sht = port->sht; - probe_ent->host_flags = port->host_flags; - probe_ent->pio_mask = port->pio_mask; - probe_ent->mwdma_mask = port->mwdma_mask; - probe_ent->udma_mask = port->udma_mask; - probe_ent->port_ops = port->port_ops; - - return probe_ent; -} - - #ifdef CONFIG_PCI @@ -4763,256 +5097,6 @@ void ata_pci_host_stop (struct ata_host_set *host_set) pci_iounmap(pdev, host_set->mmio_base); } -/** - * ata_pci_init_native_mode - Initialize native-mode driver - * @pdev: pci device to be initialized - * @port: array[2] of pointers to port info structures. - * @ports: bitmap of ports present - * - * Utility function which allocates and initializes an - * ata_probe_ent structure for a standard dual-port - * PIO-based IDE controller. The returned ata_probe_ent - * structure can be passed to ata_device_add(). The returned - * ata_probe_ent structure should then be freed with kfree(). - * - * The caller need only pass the address of the primary port, the - * secondary will be deduced automatically. If the device has non - * standard secondary port mappings this function can be called twice, - * once for each interface. - */ - -struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) -{ - struct ata_probe_ent *probe_ent = - ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); - int p = 0; - - if (!probe_ent) - return NULL; - - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = SA_SHIRQ; - probe_ent->private_data = port[0]->private_data; - - if (ports & ATA_PORT_PRIMARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); - ata_std_ports(&probe_ent->port[p]); - p++; - } - - if (ports & ATA_PORT_SECONDARY) { - probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[p].altstatus_addr = - probe_ent->port[p].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; - ata_std_ports(&probe_ent->port[p]); - p++; - } - - probe_ent->n_ports = p; - return probe_ent; -} - -static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info *port, int port_num) -{ - struct ata_probe_ent *probe_ent; - - probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port); - if (!probe_ent) - return NULL; - - probe_ent->legacy_mode = 1; - probe_ent->n_ports = 1; - probe_ent->hard_port_no = port_num; - probe_ent->private_data = port->private_data; - - switch(port_num) - { - case 0: - probe_ent->irq = 14; - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - break; - case 1: - probe_ent->irq = 15; - probe_ent->port[0].cmd_addr = 0x170; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x376; - break; - } - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; - ata_std_ports(&probe_ent->port[0]); - return probe_ent; -} - -/** - * ata_pci_init_one - Initialize/register PCI IDE host controller - * @pdev: Controller to be initialized - * @port_info: Information from low-level host driver - * @n_ports: Number of ports attached to host controller - * - * This is a helper function which can be called from a driver's - * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() - * - * LOCKING: - * Inherited from PCI layer (may sleep). - * - * RETURNS: - * Zero on success, negative on errno-based value on error. - */ - -int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, - unsigned int n_ports) -{ - struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; - struct ata_port_info *port[2]; - u8 tmp8, mask; - unsigned int legacy_mode = 0; - int disable_dev_on_err = 1; - int rc; - - DPRINTK("ENTER\n"); - - port[0] = port_info[0]; - if (n_ports > 1) - port[1] = port_info[1]; - else - port[1] = port[0]; - - if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 - && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: What if one channel is in native mode ... */ - pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); - mask = (1 << 2) | (1 << 0); - if ((tmp8 & mask) != mask) - legacy_mode = (1 << 3); - } - - /* FIXME... */ - if ((!legacy_mode) && (n_ports > 2)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); - n_ports = 2; - /* For now */ - } - - /* FIXME: Really for ATA it isn't safe because the device may be - multi-purpose and we want to leave it alone if it was already - enabled. Secondly for shared use as Arjan says we want refcounting - - Checking dev->is_enabled is insufficient as this is not set at - boot for the primary video which is BIOS enabled - */ - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - disable_dev_on_err = 0; - goto err_out; - } - - /* FIXME: Should use platform specific mappers for legacy port ranges */ - if (legacy_mode) { - if (!request_region(0x1f0, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x1f0; - res.end = 0x1f0 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 0); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x1f0 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 0); - - if (!request_region(0x170, 8, "libata")) { - struct resource *conflict, res; - res.start = 0x170; - res.end = 0x170 + 8 - 1; - conflict = ____request_resource(&ioport_resource, &res); - if (!strcmp(conflict->name, "libata")) - legacy_mode |= (1 << 1); - else { - disable_dev_on_err = 0; - printk(KERN_WARNING "ata: 0x170 IDE port busy\n"); - } - } else - legacy_mode |= (1 << 1); - } - - /* we have legacy mode, but all ports are unavailable */ - if (legacy_mode == (1 << 3)) { - rc = -EBUSY; - goto err_out_regions; - } - - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out_regions; - - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - probe_ent = ata_pci_init_legacy_port(pdev, port[0], 0); - if (legacy_mode & (1 << 1)) - probe_ent2 = ata_pci_init_legacy_port(pdev, port[1], 1); - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); - } - if (!probe_ent && !probe_ent2) { - rc = -ENOMEM; - goto err_out_regions; - } - - pci_set_master(pdev); - - /* FIXME: check ata_device_add return */ - if (legacy_mode) { - if (legacy_mode & (1 << 0)) - ata_device_add(probe_ent); - if (legacy_mode & (1 << 1)) - ata_device_add(probe_ent2); - } else - ata_device_add(probe_ent); - - kfree(probe_ent); - kfree(probe_ent2); - - return 0; - -err_out_regions: - if (legacy_mode & (1 << 0)) - release_region(0x1f0, 8); - if (legacy_mode & (1 << 1)) - release_region(0x170, 8); - pci_release_regions(pdev); -err_out: - if (disable_dev_on_err) - pci_disable_device(pdev); - return rc; -} - /** * ata_pci_remove_one - PCI layer callback for device removal * @pdev: PCI device that was removed @@ -5143,7 +5227,7 @@ EXPORT_SYMBOL_GPL(ata_device_add); EXPORT_SYMBOL_GPL(ata_host_set_remove); EXPORT_SYMBOL_GPL(ata_sg_init); EXPORT_SYMBOL_GPL(ata_sg_init_one); -EXPORT_SYMBOL_GPL(ata_qc_complete); +EXPORT_SYMBOL_GPL(__ata_qc_complete); EXPORT_SYMBOL_GPL(ata_qc_issue_prot); EXPORT_SYMBOL_GPL(ata_eng_timeout); EXPORT_SYMBOL_GPL(ata_tf_load); @@ -5160,6 +5244,7 @@ EXPORT_SYMBOL_GPL(ata_port_stop); EXPORT_SYMBOL_GPL(ata_host_stop); EXPORT_SYMBOL_GPL(ata_interrupt); EXPORT_SYMBOL_GPL(ata_qc_prep); +EXPORT_SYMBOL_GPL(ata_noop_qc_prep); EXPORT_SYMBOL_GPL(ata_bmdma_setup); EXPORT_SYMBOL_GPL(ata_bmdma_start); EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear); @@ -5169,18 +5254,30 @@ EXPORT_SYMBOL_GPL(ata_port_probe); EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); +EXPORT_SYMBOL_GPL(ata_std_probeinit); +EXPORT_SYMBOL_GPL(ata_std_softreset); +EXPORT_SYMBOL_GPL(sata_std_hardreset); +EXPORT_SYMBOL_GPL(ata_std_postreset); +EXPORT_SYMBOL_GPL(ata_std_probe_reset); +EXPORT_SYMBOL_GPL(ata_drive_probe_reset); +EXPORT_SYMBOL_GPL(ata_dev_revalidate); +EXPORT_SYMBOL_GPL(ata_dev_classify); +EXPORT_SYMBOL_GPL(ata_dev_pair); EXPORT_SYMBOL_GPL(ata_port_disable); EXPORT_SYMBOL_GPL(ata_ratelimit); +EXPORT_SYMBOL_GPL(ata_busy_sleep); +EXPORT_SYMBOL_GPL(ata_port_queue_task); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); EXPORT_SYMBOL_GPL(ata_scsi_slave_config); EXPORT_SYMBOL_GPL(ata_scsi_release); EXPORT_SYMBOL_GPL(ata_host_intr); -EXPORT_SYMBOL_GPL(ata_dev_classify); -EXPORT_SYMBOL_GPL(ata_dev_id_string); -EXPORT_SYMBOL_GPL(ata_dev_config); +EXPORT_SYMBOL_GPL(ata_id_string); +EXPORT_SYMBOL_GPL(ata_id_c_string); EXPORT_SYMBOL_GPL(ata_scsi_simulate); +EXPORT_SYMBOL_GPL(ata_eh_qc_complete); +EXPORT_SYMBOL_GPL(ata_eh_qc_retry); EXPORT_SYMBOL_GPL(ata_pio_need_iordy); EXPORT_SYMBOL_GPL(ata_timing_compute); @@ -5194,6 +5291,8 @@ EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); EXPORT_SYMBOL_GPL(ata_pci_device_suspend); EXPORT_SYMBOL_GPL(ata_pci_device_resume); +EXPORT_SYMBOL_GPL(ata_pci_default_filter); +EXPORT_SYMBOL_GPL(ata_pci_clear_simplex); #endif /* CONFIG_PCI */ EXPORT_SYMBOL_GPL(ata_device_suspend);