X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;ds=sidebyside;f=include%2Fmedia%2Fv4l2-common.h;h=91b19921f958af283e5fc78521847c5b7785ca3c;hb=cd4a4e5374110444dc38831af517e51ff5a053c3;hp=5564db13c0d5f1d1897dadb20309c1d06219480a;hpb=61b9175808670d9abf52156803ae0ed1e3706ac4;p=powerpc.git

diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h
index 5564db13c0..91b19921f9 100644
--- a/include/media/v4l2-common.h
+++ b/include/media/v4l2-common.h
@@ -121,10 +121,17 @@ enum v4l2_chip_ident {
 	/* general idents: reserved range 0-49 */
 	V4L2_IDENT_UNKNOWN = 0,
 
-	/* module saa7115: reserved range 100-149 */
+	/* module saa7110: just ident= 100 */
+	V4L2_IDENT_SAA7110 = 100,
+
+	/* module saa7111: just ident= 101 */
+	V4L2_IDENT_SAA7111 = 101,
+
+	/* module saa7115: reserved range 102-149 */
 	V4L2_IDENT_SAA7113 = 103,
 	V4L2_IDENT_SAA7114 = 104,
 	V4L2_IDENT_SAA7115 = 105,
+	V4L2_IDENT_SAA7118 = 108,
 
 	/* module saa7127: reserved range 150-199 */
 	V4L2_IDENT_SAA7127 = 157,
@@ -137,6 +144,9 @@ enum v4l2_chip_ident {
 	V4L2_IDENT_CX25841 = 241,
 	V4L2_IDENT_CX25842 = 242,
 	V4L2_IDENT_CX25843 = 243,
+
+	/* OmniVision sensors - range 250-299 */
+	V4L2_IDENT_OV7670 = 250,
 };
 
 /* audio ioctls */
@@ -166,11 +176,12 @@ enum v4l2_chip_ident {
 #define VIDIOC_INT_S_STANDBY 	     _IOW('d', 94, u32)
 
 /* only implemented if CONFIG_VIDEO_ADV_DEBUG is defined */
-#define	VIDIOC_INT_S_REGISTER 		_IOR ('d', 100, struct v4l2_register)
+#define	VIDIOC_INT_S_REGISTER 		_IOW ('d', 100, struct v4l2_register)
 #define	VIDIOC_INT_G_REGISTER 		_IOWR('d', 101, struct v4l2_register)
 
-/* Reset the I2C chip */
-#define VIDIOC_INT_RESET            	_IO  ('d', 102)
+/* Generic reset command. The argument selects which subsystems to reset.
+   Passing 0 will always reset the whole chip. */
+#define VIDIOC_INT_RESET            	_IOW ('d', 102, u32)
 
 /* Set the frequency (in Hz) of the audio clock output.
    Used to slave an audio processor to the video decoder, ensuring that audio
@@ -243,4 +254,8 @@ struct v4l2_crystal_freq {
    If the frequency is not supported, then -EINVAL is returned. */
 #define VIDIOC_INT_S_CRYSTAL_FREQ 	_IOW ('d', 113, struct v4l2_crystal_freq)
 
+/* Initialize the sensor registors to some sort of reasonable
+   default values. */
+#define VIDIOC_INT_INIT			_IOW ('d', 114, u32)
+
 #endif /* V4L2_COMMON_H_ */