X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=Documentation%2Fkernel-parameters.txt;h=84c3bd05c639df4510ae484f900f23865b2a46d8;hb=31daabda16063b64a99a526242add727601e43c3;hp=6e92ba61f7c0ea18b86557eec2bd17f2ece5d9ca;hpb=185d84b4e1f6febebbe30d785fe31310dcf9632a;p=powerpc.git diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 6e92ba61f7..84c3bd05c6 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -79,6 +79,7 @@ parameter is applicable: Documentation/scsi/. SELINUX SELinux support is enabled. SERIAL Serial support is enabled. + SH SuperH architecture is enabled. SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. SWSUSP Software suspend is enabled. @@ -125,7 +126,8 @@ and is between 256 and 4096 characters. It is defined in the file See header of drivers/scsi/53c7xx.c. See also Documentation/scsi/ncr53c7xx.txt. - acpi= [HW,ACPI] Advanced Configuration and Power Interface + acpi= [HW,ACPI,X86-64,i386] + Advanced Configuration and Power Interface Format: { force | off | ht | strict | noirq } force -- enable ACPI if default was off off -- disable ACPI if default was on @@ -136,6 +138,12 @@ and is between 256 and 4096 characters. It is defined in the file See also Documentation/pm.txt, pci=noacpi + acpi_apic_instance= [ACPI, IOAPIC] + Format: + 2: use 2nd APIC table, if available + 1,0: use 1st APIC table + default: 0 + acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode } See Documentation/power/video.txt @@ -173,19 +181,41 @@ and is between 256 and 4096 characters. It is defined in the file that require a timer override, but don't have HPET - acpi_dbg_layer= [HW,ACPI] + acpi.debug_layer= [HW,ACPI] Format: Each bit of the indicates an ACPI debug layer, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set - via /proc/acpi/debug_layer. - - acpi_dbg_level= [HW,ACPI] + via /sys/module/acpi/parameters/debug_layer. + CONFIG_ACPI_DEBUG must be enabled for this to produce any output. + Available bits (add the numbers together) to enable debug output + for specific parts of the ACPI subsystem: + 0x01 utilities 0x02 hardware 0x04 events 0x08 tables + 0x10 namespace 0x20 parser 0x40 dispatcher + 0x80 executer 0x100 resources 0x200 acpica debugger + 0x400 os services 0x800 acpica disassembler. + The number can be in decimal or prefixed with 0x in hex. + Warning: Many of these options can produce a lot of + output and make your system unusable. Be very careful. + + acpi.debug_level= [HW,ACPI] Format: Each bit of the indicates an ACPI debug level, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set - via /proc/acpi/debug_level. + via /sys/module/acpi/parameters/debug_level. + CONFIG_ACPI_DEBUG must be enabled for this to produce any output. + Available bits (add the numbers together) to enable different + debug output levels of the ACPI subsystem: + 0x01 error 0x02 warn 0x04 init 0x08 debug object + 0x10 info 0x20 init names 0x40 parse 0x80 load + 0x100 dispatch 0x200 execute 0x400 names 0x800 operation region + 0x1000 bfield 0x2000 tables 0x4000 values 0x8000 objects + 0x10000 resources 0x20000 user requests 0x40000 package. + The number can be in decimal or prefixed with 0x in hex. + Warning: Many of these options can produce a lot of + output and make your system unusable. Be very careful. + acpi_fake_ecdt [HW,ACPI] Workaround failure due to BIOS lacking ECDT @@ -485,7 +515,7 @@ and is between 256 and 4096 characters. It is defined in the file dtc3181e= [HW,SCSI] - earlyprintk= [IA-32,X86-64] + earlyprintk= [IA-32,X86-64,SH] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] @@ -772,6 +802,9 @@ and is between 256 and 4096 characters. It is defined in the file lapic [IA-32,APIC] Enable the local APIC even if BIOS disabled it. + lapic_timer_c2_ok [IA-32,x86-64,APIC] trust the local apic timer in + C2 power state. + lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:,irq: @@ -1115,6 +1148,8 @@ and is between 256 and 4096 characters. It is defined in the file nolapic [IA-32,APIC] Do not enable or use the local APIC. + nolapic_timer [IA-32,APIC] Do not use the local APIC timer. + noltlbs [PPC] Do not use large page/tlb entries for kernel lowmem mapping on PPC40x. @@ -1779,12 +1814,12 @@ and is between 256 and 4096 characters. It is defined in the file for newly-detected USB devices (default 2). This is the time required before an idle device will be autosuspended. Devices for which the delay is set - to 0 won't be autosuspended at all. + to a negative value won't be autosuspended at all. usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. - vdso= [IA-32] + vdso= [IA-32,SH] vdso=1: enable VDSO (default) vdso=0: disable VDSO mapping