X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=Documentation%2Fusb%2Ferror-codes.txt;h=9cf83e8c27b8f94208d7ad0ebc4587d82430164d;hb=756e2b014349e90aca1d0432498d1b35e5445566;hp=39c68f8c4e6c7cd8969fa1f0ae03a1afd1bcc424;hpb=3b9f6cb8a1ec791be79c6c7595fea922f12d1e64;p=powerpc.git diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt index 39c68f8c4e..9cf83e8c27 100644 --- a/Documentation/usb/error-codes.txt +++ b/Documentation/usb/error-codes.txt @@ -126,7 +126,7 @@ one or more packets could finish before an error stops further endpoint I/O. urb->transfer_flags. -ENODEV Device was removed. Often preceded by a burst of - other errors, since the hub driver does't detect + other errors, since the hub driver doesn't detect device removal events immediately. -EXDEV ISO transfer only partially completed @@ -145,7 +145,7 @@ one or more packets could finish before an error stops further endpoint I/O. hardware problems such as bad devices (including firmware) or cables. (**) This is also one of several codes that different kinds of host -controller use to to indicate a transfer has failed because of device +controller use to indicate a transfer has failed because of device disconnect. In the interval before the hub driver starts disconnect processing, devices may receive such fault reports for every request.