X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=arch%2Farm%2FKconfig;h=8bf97e0eacdb6ddcdbfec048fce20de9b88b6908;hb=59b8175c771040afcd4ad67022b0cc80c216b866;hp=6783c2e5512de6e75bed91d55a45ff0c14ee0cf5;hpb=e9ccb79927225d8cd8d022a7c09bfb2fad935b89;p=powerpc.git
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 6783c2e551..8bf97e0eac 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -9,6 +9,7 @@ config ARM
bool
default y
select RTC_LIB
+ select SYS_SUPPORTS_APM_EMULATION
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -17,6 +18,9 @@ config ARM
Europe. There is an ARM Linux project with a web page at
.
+config SYS_SUPPORTS_APM_EMULATION
+ bool
+
config GENERIC_TIME
bool
default n
@@ -25,6 +29,10 @@ config MMU
bool
default y
+config NO_IOPORT
+ bool
+ default n
+
config EISA
bool
---help---
@@ -96,6 +104,10 @@ config GENERIC_BUST_SPINLOCK
config ARCH_MAY_HAVE_PC_FDC
bool
+config ZONE_DMA
+ bool
+ default y
+
config GENERIC_ISA_DMA
bool
@@ -233,6 +245,8 @@ config ARCH_IOP33X
config ARCH_IOP13XX
bool "IOP13xx-based"
+ depends on MMU
+ select PLAT_IOP
select PCI
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -271,6 +285,14 @@ config ARCH_L7200
If you have any questions or comments about the Linux kernel port
to this board, send e-mail to .
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
help
@@ -280,6 +302,7 @@ config ARCH_PXA
bool "PXA2xx-based"
depends on MMU
select ARCH_MTD_XIP
+ select GENERIC_TIME
help
Support for Intel's PXA2XX processor line.
@@ -290,6 +313,7 @@ config ARCH_RPC
select TIMER_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ISA_DMA_API
+ select NO_IOPORT
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -303,7 +327,7 @@ config ARCH_SA1100
Support for StrongARM 11x0 based boards.
config ARCH_S3C2410
- bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442"
+ bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
help
Samsung S3C2410X CPU based systems, such as the Simtec Electronics
BAST (), the IPAQ 1940 or
@@ -363,7 +387,16 @@ source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
+source "arch/arm/plat-s3c24xx/Kconfig"
+
+if ARCH_S3C2410
+source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
+source "arch/arm/mach-s3c2412/Kconfig"
+source "arch/arm/mach-s3c2440/Kconfig"
+source "arch/arm/mach-s3c2442/Kconfig"
+source "arch/arm/mach-s3c2443/Kconfig"
+endif
source "arch/arm/mach-lh7a40x/Kconfig"
@@ -377,10 +410,12 @@ source "arch/arm/mach-aaec2000/Kconfig"
source "arch/arm/mach-realview/Kconfig"
-source "arch/arm/mach-at91rm9200/Kconfig"
+source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-netx/Kconfig"
+source "arch/arm/mach-ns9xxx/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -738,6 +773,20 @@ config XIP_PHYS_ADDR
be linked for and stored to. This address is dependent on your
own flash usage.
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support.
+
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX )
@@ -856,31 +905,6 @@ menu "Power management options"
source "kernel/power/Kconfig"
-config APM
- tristate "Advanced Power Management Emulation"
- ---help---
- APM is a BIOS specification for saving power using several different
- techniques. This is mostly useful for battery powered laptops with
- APM compliant BIOSes. If you say Y here, the system time will be
- reset after a RESUME operation, the /proc/apm device will provide
- battery status information, and user-space programs will receive
- notification of APM "events" (e.g. battery status change).
-
- In order to use APM, you will need supporting software. For location
- and more information, read and the
- Battery Powered Linux mini-HOWTO, available from
- .
-
- This driver does not spin down disk drives (see the hdparm(8)
- manpage ("man 8 hdparm") for that), and it doesn't turn off
- VESA-compliant "green" monitors.
-
- Generally, if you don't have a battery in your machine, there isn't
- much point in using this driver and you should say N. If you get
- random kernel OOPSes or reboots that don't seem to be related to
- anything, try disabling/enabling this option (or disabling/enabling
- APM in your BIOS).
-
endmenu
source "net/Kconfig"