X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=arch%2Farm%2Fmach-ixp2000%2Fixdp2x01.c;h=f9d4968c1d66de07aac95aef902ff0aa3a7223fe;hb=80576fd86b350a90c5be329de1e382d31121a8d0;hp=e6a882f35da2bf8a43397716a7ca9a2b65077eed;hpb=ec1890c5df451799dec969a3581ff72e1934b5ee;p=powerpc.git

diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index e6a882f35d..f9d4968c1d 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -212,6 +212,7 @@ void __init ixdp2x01_pci_preinit(void)
 {
 	ixp2000_reg_write(IXP2000_PCI_ADDR_EXT, 0x00000000);
 	ixp2000_pci_preinit();
+	pcibios_setup("firmware");
 }
 
 #define DEVPIN(dev, pin) ((pin) | ((dev) << 3))
@@ -283,7 +284,7 @@ static int ixdp2x01_pci_setup(int nr, struct pci_sys_data *sys)
 {
 	sys->mem_offset = 0xe0000000;
 
-	if (machine_is_ixdp2801())
+	if (machine_is_ixdp2801() || machine_is_ixdp28x5())
 		sys->mem_offset -= ((*IXP2000_PCI_ADDR_EXT & 0xE000) << 16);
 
 	return ixp2000_pci_setup(nr, sys);
@@ -299,7 +300,10 @@ struct hw_pci ixdp2x01_pci __initdata = {
 
 int __init ixdp2x01_pci_init(void)
 {
-	pci_common_init(&ixdp2x01_pci);
+	if (machine_is_ixdp2401() || machine_is_ixdp2801() ||\
+		machine_is_ixdp28x5())
+		pci_common_init(&ixdp2x01_pci);
+
 	return 0;
 }
 
@@ -376,7 +380,6 @@ static void __init ixdp2x01_init_machine(void)
 #ifdef CONFIG_ARCH_IXDP2401
 MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_ram	= 0x00000000,
 	.phys_io	= IXP2000_UART_PHYS_BASE,
 	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,
@@ -390,7 +393,21 @@ MACHINE_END
 #ifdef CONFIG_ARCH_IXDP2801
 MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
 	/* Maintainer: MontaVista Software, Inc. */
-	.phys_ram	= 0x00000000,
+	.phys_io	= IXP2000_UART_PHYS_BASE,
+	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.map_io		= ixdp2x01_map_io,
+	.init_irq	= ixdp2x01_init_irq,
+	.timer		= &ixdp2x01_timer,
+	.init_machine	= ixdp2x01_init_machine,
+MACHINE_END
+
+/*
+ * IXDP28x5 is basically an IXDP2801 with a different CPU but Intel
+ * changed the machine ID in the bootloader
+ */
+MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
+	/* Maintainer: MontaVista Software, Inc. */
 	.phys_io	= IXP2000_UART_PHYS_BASE,
 	.io_pg_offst	= ((IXP2000_UART_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= 0x00000100,