X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=arch%2Farm%2Fmach-omap1%2Fboard-perseus2.c;h=3913a3cc0ce6cb4f255652e6991e52ffe9cf8c8c;hb=532bda5d9cd2f94a9e374765c23858c7d8641f66;hp=354b157acb3a2071193c450630e846618db69020;hpb=c2cc87ca9561ddfe744d446789cc10f507e87db9;p=powerpc.git

diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 354b157acb..3913a3cc0c 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -29,6 +29,7 @@
 #include <asm/arch/mux.h>
 #include <asm/arch/fpga.h>
 #include <asm/arch/common.h>
+#include <asm/arch/board.h>
 
 static struct resource smc91x_resources[] = {
 	[0] = {
@@ -43,8 +44,6 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
-static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
-
 static struct mtd_partition p2_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
 	{
@@ -111,9 +110,27 @@ static struct platform_device *devices[] __initdata = {
 	&smc91x_device,
 };
 
+static struct omap_uart_config perseus2_uart_config __initdata = {
+	.enabled_uarts = ((1 << 0) | (1 << 1)),
+};
+
+static struct omap_lcd_config perseus2_lcd_config __initdata = {
+	.panel_name	= "p2",
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel perseus2_config[] = {
+	{ OMAP_TAG_UART,	&perseus2_uart_config },
+	{ OMAP_TAG_LCD,		&perseus2_lcd_config },
+};
+
 static void __init omap_perseus2_init(void)
 {
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	omap_board_config = perseus2_config;
+	omap_board_config_size = ARRAY_SIZE(perseus2_config);
+	omap_serial_init();
 }
 
 static void __init perseus2_init_smc91x(void)
@@ -127,11 +144,11 @@ static void __init perseus2_init_smc91x(void)
 
 void omap_perseus2_init_irq(void)
 {
+	omap1_init_common_hw();
 	omap_init_irq();
 	omap_gpio_init();
 	perseus2_init_smc91x();
 }
-
 /* Only FPGA needs to be mapped here. All others are done with ioremap */
 static struct map_desc omap_perseus2_io_desc[] __initdata = {
 	{
@@ -144,7 +161,7 @@ static struct map_desc omap_perseus2_io_desc[] __initdata = {
 
 static void __init omap_perseus2_map_io(void)
 {
-	omap_map_common_io();
+	omap1_map_common_io();
 	iotable_init(omap_perseus2_io_desc,
 		     ARRAY_SIZE(omap_perseus2_io_desc));
 
@@ -168,7 +185,7 @@ static void __init omap_perseus2_map_io(void)
 	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
 
 	/*
-	 * Ethernet support trough the debug board
+	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
 	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
@@ -179,12 +196,10 @@ static void __init omap_perseus2_map_io(void)
 	 * It is used as the Ethernet controller interrupt
 	 */
 	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
-	omap_serial_init(p2_serial_ports);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
 	/* Maintainer: Kevin Hilman <kjh@hilman.org> */
-	.phys_ram	= 0x10000000,
 	.phys_io	= 0xfff00000,
 	.io_pg_offst	= ((0xfef00000) >> 18) & 0xfffc,
 	.boot_params	= 0x10000100,