X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=arch%2Fpowerpc%2Fplatforms%2Fembedded6xx%2FKconfig;h=ddbe398fbd482d12dd02cff9df6c1f396b2e1b3d;hb=15a4cb9c25df05a5d4844e80a1aea83d66165868;hp=81250090f98d39a067f6fe3f0485adfdc70901ae;hpb=d8762748cae4f85b3201c0304969d993b42d5258;p=powerpc.git

diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 81250090f9..ddbe398fbd 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -74,6 +74,29 @@ config SANDPOINT
 	  Select SANDPOINT if configuring for a Motorola Sandpoint X3
 	  (any flavor).
 
+config LINKSTATION
+	bool "Linkstation / Kurobox(HG) from Buffalo"
+	select MPIC
+	select FSL_SOC
+	select PPC_UDBG_16550 if SERIAL_8250
+	help
+	  Select LINKSTATION if configuring for one of PPC- (MPC8241)
+	  based NAS systems from Buffalo Technology. So far only
+	  KuroboxHG has been tested. In the future classical Kurobox,
+	  Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based
+	  Terastation systems should be supported too.
+
+config MPC7448HPC2
+	bool "Freescale MPC7448HPC2(Taiga)"
+	select TSI108_BRIDGE
+	select DEFAULT_UIMAGE
+	select PPC_UDBG_16550
+	select MPIC
+	select MPIC_WEIRD
+	help
+	  Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga)
+	  platform
+
 config RADSTONE_PPC7D
 	bool "Radstone Technology PPC7D board"
 	select PPC_I8259
@@ -135,25 +158,6 @@ config PQ2FADS
 	  Select PQ2FADS if you wish to configure for a Freescale
 	  PQ2FADS board (-VR or -ZU).
 
-config LITE5200
-	bool "Freescale LITE5200 / (IceCube)"
-	select PPC_MPC52xx
-	help
-	  Support for the LITE5200 dev board for the MPC5200 from Freescale.
-	  This is for the LITE5200 version 2.0 board. Don't know if it changes
-	  much but it's only been tested on this board version. I think this
-	  board is also known as IceCube.
-
-config MPC834x_SYS
-	bool "Freescale MPC834x SYS"
-	help
-	  This option enables support for the MPC 834x SYS evaluation board.
-
-	  Be aware that PCI buses can only function when SYS board is plugged
-	  into the PIB (Platform IO Board) board from Freescale which provide
-	  3 PCI slots.  The PIBs PCI initialization is the bootloader's
-	  responsiblilty.
-
 config EV64360
 	bool "Marvell-EV64360BP"
 	help
@@ -171,9 +175,6 @@ config TQM8xxL
 	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
 	default y
 
-config PPC_MPC52xx
-	bool
-
 config 8260
 	bool "CPM2 Support" if WILLOW
 	depends on 6xx
@@ -192,14 +193,6 @@ config 8272
 	  The MPC8272 CPM has a different internal dpram setup than other CPM2
 	  devices
 
-config 83xx
-	bool
-	default y if MPC834x_SYS
-
-config MPC834x
-	bool
-	default y if MPC834x_SYS
-
 config CPM2
 	bool
 	depends on 8260 || MPC8560 || MPC8555
@@ -215,7 +208,7 @@ config PPC_GEN550
 	depends on SANDPOINT || SPRUCE || PPLUS || \
 		PRPMC750 || PRPMC800 || LOPEC || \
 		(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
-		83xx
+		83xx || LINKSTATION
 	default y
 
 config FORCE
@@ -239,6 +232,11 @@ config MV64X60
 	select PPC_INDIRECT_PCI
 	default y
 
+config TSI108_BRIDGE
+	bool
+	depends on MPC7448HPC2
+	default y
+
 menu "Set bridge options"
 	depends on MV64X60
 
@@ -284,13 +282,13 @@ config EPIC_SERIAL_MODE
 
 config MPC10X_BRIDGE
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
+	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
 	select PPC_INDIRECT_PCI
 	default y
 
 config MPC10X_OPENPIC
 	bool
-	depends on POWERPMC250 || LOPEC || SANDPOINT
+	depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION
 	default y
 
 config MPC10X_STORE_GATHERING