X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=client%2FGoodFETCC.py;h=c37f540b6ad68502d8d56ae0111308f4e1052ac8;hb=309608831e997dba640b1548be3207910386c4bd;hp=474685f76c417b6b87244bbc1be77a872b5d2158;hpb=d104aae4508ff7fbbe99a1d12fed27f6d859518f;p=goodfet diff --git a/client/GoodFETCC.py b/client/GoodFETCC.py index 474685f..c37f540 100644 --- a/client/GoodFETCC.py +++ b/client/GoodFETCC.py @@ -278,6 +278,154 @@ class GoodFETCC(GoodFET): self.pokebysym("SYNC1",0xD3); self.pokebysym("SYNC0",0x91); return; + def config_iclicker(self,band="lf"): + #Mike Ossmann figured most of this out, with help from neighbors. + + self.pokebysym("FSCTRL1" , 0x06) # Frequency synthesizer control. + self.pokebysym("FSCTRL0" , 0x00) # Frequency synthesizer control. + + #Don't change these while the radio is active. + self.pokebysym("FSCAL3" , 0xE9) + self.pokebysym("FSCAL2" , 0x2A) + self.pokebysym("FSCAL1" , 0x00) + self.pokebysym("FSCAL0" , 0x1F) + + if band=="ismeu" or band=="eu": + print "The EU band is unknown."; + elif band=="ismus" or band=="us": + #905.5MHz + self.pokebysym("FREQ2" , 0x22) # Frequency control word, high byte. + self.pokebysym("FREQ1" , 0xD3) # Frequency control word, middle byte. + self.pokebysym("FREQ0" , 0xAC) # Frequency control word, low byte. + elif band=="ismlf" or band=="lf": + print "There is no LF version of the iclicker." + elif band=="none": + pass; + else: + #Got a frequency, not a band. + self.RF_setfreq(eval(band)); + # 812.5kHz bandwidth, 152.34 kbaud + self.pokebysym("MDMCFG4" , 0x1C) + self.pokebysym("MDMCFG3" , 0x80) + # no FEC, 2 byte preamble, 250kHz chan spacing + + #15/16 sync + #self.pokebysym("MDMCFG2" , 0x01) + #16/16 sync + self.pokebysym("MDMCFG2" , 0x02) + + self.pokebysym("MDMCFG1" , 0x03) + self.pokebysym("MDMCFG0" , 0x3b) + + self.pokebysym("CHANNR" , 0x2e) # Channel zero. + + #self.pokebysym("DEVIATN" , 0x71) # 118.5 + self.pokebysym("DEVIATN" , 0x72) # 253.9 kHz deviation + + self.pokebysym("FREND1" , 0x56) # Front end RX configuration. + self.pokebysym("FREND0" , 0x10) # Front end RX configuration. + self.pokebysym("MCSM2" , 0x07) + self.pokebysym("MCSM1" , 0x30) #Auto freq. cal. + self.pokebysym("MCSM0" , 0x14) + + self.pokebysym("TEST2" , 0x88) # + self.pokebysym("TEST1" , 0x31) # + self.pokebysym("TEST0" , 0x09) # High VCO (Upper band.) + self.pokebysym("PA_TABLE0", 0xC0) # Max output power. + self.pokebysym("PKTCTRL1" , 0x45) # Preamble qualidy 2*4=6, adr check, status + self.pokebysym("PKTCTRL0" , 0x00) # No whitening, CR, fixed len. + + self.pokebysym("PKTLEN" , 0x09) # Packet length. + + self.pokebysym("SYNC1",0xB0); + self.pokebysym("SYNC0",0xB0); + self.pokebysym("ADDR", 0xB0); + return; + def config_ook(self,band="none"): + self.pokebysym("FSCTRL1" , 0x0C) #08 # Frequency synthesizer control. + self.pokebysym("FSCTRL0" , 0x00) # Frequency synthesizer control. + + #Don't change these while the radio is active. + self.pokebysym("FSCAL3" , 0xEA) # Frequency synthesizer calibration. + self.pokebysym("FSCAL2" , 0x2A) # Frequency synthesizer calibration. + self.pokebysym("FSCAL1" , 0x00) # Frequency synthesizer calibration. + self.pokebysym("FSCAL0" , 0x1F) # Frequency synthesizer calibration. + + if band=="ismeu" or band=="eu": + self.pokebysym("FREQ2" , 0x21) # Frequency control word, high byte. + self.pokebysym("FREQ1" , 0x71) # Frequency control word, middle byte. + self.pokebysym("FREQ0" , 0x7a) # Frequency control word, low byte. + elif band=="ismus" or band=="us": + self.pokebysym("FREQ2" , 0x22) # Frequency control word, high byte. + self.pokebysym("FREQ1" , 0xB1) # Frequency control word, middle byte. + self.pokebysym("FREQ0" , 0x3B) # Frequency control word, low byte. + elif band=="ismlf" or band=="lf": + self.pokebysym("FREQ2" , 0x0C) # Frequency control word, high byte. + self.pokebysym("FREQ1" , 0x1D) # Frequency control word, middle byte. + self.pokebysym("FREQ0" , 0x89) # Frequency control word, low byte. + elif band=="none": + pass; + else: + #Got a frequency, not a band. + self.RF_setfreq(eval(band)); + + #data rate + #~1 + #self.pokebysym("MDMCFG4" , 0x85) + #self.pokebysym("MDMCFG3" , 0x83) + #0.5 + #self.pokebysym("MDMCFG4" , 0xf4) + #self.pokebysym("MDMCFG3" , 0x43) + #2.4 + #self.pokebysym("MDMCFG4" , 0xf6) + #self.pokebysym("MDMCFG3" , 0x83) + + #4.8 kbaud + #print "Warning: Default to 4.8kbaud."; + #self.pokebysym("MDMCFG4" , 0xf7) + #self.pokebysym("MDMCFG3" , 0x83) + #9.6 kbaud + #print "Warning: Default to 9.6kbaud."; + # + + self.pokebysym("MDMCFG4" , 0xf8) + self.pokebysym("MDMCFG3" , 0x83) + self.pokebysym("MDMCFG2" , 0x34) # OOK, carrier-sense, no-manchester + + #Kind aright for keeloq + print "Warning: Guessing baud rate."; + #self.pokebysym("MDMCFG4" , 0xf6) + #self.pokebysym("MDMCFG3" , 0x93) + #self.pokebysym("MDMCFG2" , 0x3C) # OOK, carrier-sense, manchester + + self.pokebysym("MDMCFG1" , 0x00) # Modem configuration. + self.pokebysym("MDMCFG0" , 0xF8) # Modem configuration. + self.pokebysym("CHANNR" , 0x00) # Channel number. + + self.pokebysym("FREND1" , 0x56) # Front end RX configuration. + self.pokebysym("FREND0" , 0x11) # Front end RX configuration. + self.pokebysym("MCSM0" , 0x18) # Main Radio Control State Machine configuration. + #self.pokebysym("FOCCFG" , 0x1D) # Frequency Offset Compensation Configuration. + #self.pokebysym("BSCFG" , 0x1C) # Bit synchronization Configuration. + + #self.pokebysym("AGCCTRL2" , 0xC7) # AGC control. + #self.pokebysym("AGCCTRL1" , 0x00) # AGC control. + #self.pokebysym("AGCCTRL0" , 0xB2) # AGC control. + + self.pokebysym("TEST2" , 0x81) # Various test settings. + self.pokebysym("TEST1" , 0x35) # Various test settings. + self.pokebysym("TEST0" , 0x0B) # Various test settings. + self.pokebysym("PA_TABLE0", 0xc2) # Max output power. + self.pokebysym("PKTCTRL1" , 0x04) # Packet automation control, w/ lqi + #self.pokebysym("PKTCTRL1" , 0x00) # Packet automation control. w/o lqi + #self.pokebysym("PKTCTRL0" , 0x05) # Packet automation control, w/ checksum. + self.pokebysym("PKTCTRL0" , 0x00) # Packet automation control, w/o checksum, fixed length + self.pokebysym("ADDR" , 0x01) # Device address. + self.pokebysym("PKTLEN" , 0xFF) # Packet length. + + self.pokebysym("SYNC1",0xD3); + self.pokebysym("SYNC0",0x91); + def config_simpliciti(self,band="none"): self.pokebysym("FSCTRL1" , 0x0C) #08 # Frequency synthesizer control. self.pokebysym("FSCTRL0" , 0x00) # Frequency synthesizer control. @@ -687,7 +835,12 @@ class GoodFETCC(GoodFET): """Start debugging.""" self.setup(); self.writecmd(self.APP,0x20,0,self.data); - ident=self.CCidentstr(); + ident=self.CCident(); + if ident==0xFFFF or ident==0x0000: + self.writecmd(self.APP,0x20,0,self.data); + ident=self.CCident(); + + #print "Target identifies as %s." % ident; #print "Status: %s." % self.status(); self.CCreleasecpu();