X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_amd.c;h=67c7e87dec042417bf33e426091216570012d075;hb=5351fb106a84d6ac584c2501e3b335093d38a58c;hp=a6b330089f227f0fe62204f001b23cb3c97fef87;hpb=ea14fad0d416354a4e9bb1a04f32acba706f9548;p=powerpc.git diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index a6b330089f..67c7e87dec 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.2.7" +#define DRV_VERSION "0.3.8" /** * timing_setup - shared timing computation and load @@ -119,34 +119,27 @@ static void timing_setup(struct ata_port *ap, struct ata_device *adev, int offse } /** - * amd_probe_init - cable detection + * amd_probe_init - perform reset handling * @ap: ATA port + * @deadline: deadline jiffies for the operation * - * Perform cable detection. The BIOS stores this in PCI config - * space for us. + * Reset sequence checking enable bits to see which ports are + * active. */ -static int amd_pre_reset(struct ata_port *ap) +static int amd_pre_reset(struct ata_port *ap, unsigned long deadline) { - static const u32 bitmask[2] = {0x03, 0xC0}; static const struct pci_bits amd_enable_bits[] = { { 0x40, 1, 0x02, 0x02 }, { 0x40, 1, 0x01, 0x01 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) return -ENOENT; - pci_read_config_byte(pdev, 0x42, &ata66); - if (ata66 & bitmask[ap->port_no]) - ap->cbl = ATA_CBL_PATA80; - else - ap->cbl = ATA_CBL_PATA40; - return ata_std_prereset(ap); - + return ata_std_prereset(ap, deadline); } static void amd_error_handler(struct ata_port *ap) @@ -156,28 +149,16 @@ static void amd_error_handler(struct ata_port *ap) ata_std_postreset); } -static int amd_early_pre_reset(struct ata_port *ap) +static int amd_cable_detect(struct ata_port *ap) { + static const u32 bitmask[2] = {0x03, 0x0C}; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - static struct pci_bits amd_enable_bits[] = { - { 0x40, 1, 0x02, 0x02 }, - { 0x40, 1, 0x01, 0x01 } - }; - - if (!pci_test_config_bits(pdev, &amd_enable_bits[ap->port_no])) - return -ENOENT; - - /* No host side cable detection */ - ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); - -} + u8 ata66; -static void amd_early_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, amd_early_pre_reset, - ata_std_softreset, NULL, - ata_std_postreset); + pci_read_config_byte(pdev, 0x42, &ata66); + if (ata66 & bitmask[ap->port_no]) + return ATA_CBL_PATA80; + return ATA_CBL_PATA40; } /** @@ -246,33 +227,19 @@ static void amd133_set_dmamode(struct ata_port *ap, struct ata_device *adev) * space for us. */ -static int nv_pre_reset(struct ata_port *ap) { - static const u8 bitmask[2] = {0x03, 0xC0}; +static int nv_pre_reset(struct ata_port *ap, unsigned long deadline) +{ static const struct pci_bits nv_enable_bits[] = { { 0x50, 1, 0x02, 0x02 }, { 0x50, 1, 0x01, 0x01 } }; struct pci_dev *pdev = to_pci_dev(ap->host->dev); - u8 ata66; - u16 udma; if (!pci_test_config_bits(pdev, &nv_enable_bits[ap->port_no])) return -ENOENT; - pci_read_config_byte(pdev, 0x52, &ata66); - if (ata66 & bitmask[ap->port_no]) - ap->cbl = ATA_CBL_PATA80; - else - ap->cbl = ATA_CBL_PATA40; - - /* We now have to double check because the Nvidia boxes BIOS - doesn't always set the cable bits but does set mode bits */ - - pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); - if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) - ap->cbl = ATA_CBL_PATA80; - return ata_std_prereset(ap); + return ata_std_prereset(ap, deadline); } static void nv_error_handler(struct ata_port *ap) @@ -281,6 +248,29 @@ static void nv_error_handler(struct ata_port *ap) ata_std_softreset, NULL, ata_std_postreset); } + +static int nv_cable_detect(struct ata_port *ap) +{ + static const u8 bitmask[2] = {0x03, 0x0C}; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 ata66; + u16 udma; + int cbl; + + pci_read_config_byte(pdev, 0x52, &ata66); + if (ata66 & bitmask[ap->port_no]) + cbl = ATA_CBL_PATA80; + else + cbl = ATA_CBL_PATA40; + + /* We now have to double check because the Nvidia boxes BIOS + doesn't always set the cable bits but does set mode bits */ + pci_read_config_word(pdev, 0x62 - 2 * ap->port_no, &udma); + if ((udma & 0xC4) == 0xC4 || (udma & 0xC400) == 0xC400) + cbl = ATA_CBL_PATA80; + return cbl; +} + /** * nv100_set_piomode - set initial PIO mode data * @ap: ATA interface @@ -334,8 +324,10 @@ static struct scsi_host_template amd_sht = { .slave_configure = ata_scsi_slave_config, .slave_destroy = ata_scsi_slave_destroy, .bios_param = ata_std_bios_param, +#ifdef CONFIG_PM .resume = ata_scsi_device_resume, .suspend = ata_scsi_device_suspend, +#endif }; static struct ata_port_operations amd33_port_ops = { @@ -351,8 +343,9 @@ static struct ata_port_operations amd33_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = amd_early_error_handler, + .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_40wire, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -362,14 +355,14 @@ static struct ata_port_operations amd33_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations amd66_port_ops = { @@ -385,8 +378,9 @@ static struct ata_port_operations amd66_port_ops = { .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, - .error_handler = amd_early_error_handler, + .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -396,14 +390,14 @@ static struct ata_port_operations amd66_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations amd100_port_ops = { @@ -421,6 +415,7 @@ static struct ata_port_operations amd100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = ata_cable_unknown, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -430,14 +425,14 @@ static struct ata_port_operations amd100_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations amd133_port_ops = { @@ -455,6 +450,7 @@ static struct ata_port_operations amd133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = amd_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = amd_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -464,14 +460,14 @@ static struct ata_port_operations amd133_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations nv100_port_ops = { @@ -489,6 +485,7 @@ static struct ata_port_operations nv100_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = nv_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -498,14 +495,14 @@ static struct ata_port_operations nv100_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static struct ata_port_operations nv133_port_ops = { @@ -523,6 +520,7 @@ static struct ata_port_operations nv133_port_ops = { .thaw = ata_bmdma_thaw, .error_handler = nv_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, + .cable_detect = nv_cable_detect, .bmdma_setup = ata_bmdma_setup, .bmdma_start = ata_bmdma_start, @@ -532,14 +530,14 @@ static struct ata_port_operations nv133_port_ops = { .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_pio_data_xfer, + .data_xfer = ata_data_xfer, .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop }; static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) @@ -663,6 +661,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) return ata_pci_init_one(pdev, port_info, 2); } +#ifdef CONFIG_PM static int amd_reinit_one(struct pci_dev *pdev) { if (pdev->vendor == PCI_VENDOR_ID_AMD) { @@ -679,6 +678,7 @@ static int amd_reinit_one(struct pci_dev *pdev) } return ata_pci_device_resume(pdev); } +#endif static const struct pci_device_id amd[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 }, @@ -708,8 +708,10 @@ static struct pci_driver amd_pci_driver = { .id_table = amd, .probe = amd_init_one, .remove = ata_pci_remove_one, +#ifdef CONFIG_PM .suspend = ata_pci_device_suspend, .resume = amd_reinit_one, +#endif }; static int __init amd_init(void)