X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_artop.c;h=00e9ec342db001cda8e2ff32e9e29435f10fb92e;hb=d8a5ad75cc4d577987964e37a4c43b1c648c201e;hp=2cd30761ca1f3f471fac39c6cc913ba02ac24684;hpb=37043318b12ea351c357d7bd8a184b63940f38d7;p=powerpc.git

diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 2cd30761ca..00e9ec342d 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -49,8 +49,6 @@ static int artop6210_pre_reset(struct ata_port *ap)
 
 	if (!pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
-
-	ap->cbl = ATA_CBL_PATA40;
 	return ata_std_prereset(ap);
 }
 
@@ -85,18 +83,28 @@ static int artop6260_pre_reset(struct ata_port *ap)
 	};
 
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	/* Odd numbered device ids are the units with enable bits (the -R cards) */
 	if (pdev->device % 1 && !pci_test_config_bits(pdev, &artop_enable_bits[ap->port_no]))
 		return -ENOENT;
+	return ata_std_prereset(ap);
+}
 
+/**
+ *	artop6260_cable_detect	-	identify cable type
+ *	@ap: Port
+ *
+ *	Identify the cable type for the ARTOp interface in question
+ */
+ 
+static int artop6260_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
 	pci_read_config_byte(pdev, 0x49, &tmp);
 	if (tmp & (1 << ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
 }
 
 /**
@@ -225,7 +233,7 @@ static void artop6260_set_piomode(struct ata_port *ap, struct ata_device *adev)
 /**
  *	artop6210_set_dmamode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device whose timings we are configuring
  *
  *	Set DMA mode for device, in host controller PCI config space.
  *
@@ -307,7 +315,6 @@ static struct scsi_host_template artop_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
@@ -334,6 +341,7 @@ static const struct ata_port_operations artop6210_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6210_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_40wire,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -342,14 +350,14 @@ static const struct ata_port_operations artop6210_ops = {
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
 
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };
 
 static const struct ata_port_operations artop6260_ops = {
@@ -367,6 +375,7 @@ static const struct ata_port_operations artop6260_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= artop6260_error_handler,
 	.post_internal_cmd 	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= artop6260_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -374,14 +383,14 @@ static const struct ata_port_operations artop6260_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };