X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_cypress.c;h=6ec049c3b1dcf4e0fbe03b374a0d17f69672a405;hb=48be6b18336567a795bc41e4526f9adfb3a3d68e;hp=e2a95699bae7ff293ef1eb29fa5d859db3ccefd8;hpb=f0eef25339f92f7cd4aeea23d9ae97987a5a1e82;p=powerpc.git

diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index e2a95699ba..6ec049c3b1 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -41,17 +41,6 @@ enum {
 	CY82_INDEX_TIMEOUT	= 0x32
 };
 
-static int cy82c693_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-static void cy82c693_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, cy82c693_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	cy82c693_set_piomode	-	set initial PIO mode data
  *	@ap: ATA interface
@@ -136,8 +125,10 @@ static struct scsi_host_template cy82c693_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations cy82c693_port_ops = {
@@ -154,8 +145,9 @@ static struct ata_port_operations cy82c693_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= cy82c693_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -165,14 +157,14 @@ static struct ata_port_operations cy82c693_port_ops = {
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_pio_data_xfer,
+	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
 
 	.port_start	= ata_port_start,
-	.port_stop	= ata_port_stop,
-	.host_stop	= ata_host_stop
 };
 
 static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -206,8 +198,10 @@ static struct pci_driver cy82c693_pci_driver = {
 	.id_table	= cy82c693,
 	.probe 		= cy82c693_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
 	.resume		= ata_pci_device_resume,
+#endif
 };
 
 static int __init cy82c693_init(void)