X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_efar.c;h=a3216850bba15e10938da4f2335f50e863b516e5;hb=7c3576d261ce046789a7db14f43303f8120910c7;hp=ef18c60fe14027802f3bfc2ff4e8c7496320fda7;hpb=e30fdb1e026c2d05f216d2e5a25bfafdfd261ec2;p=powerpc.git

diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index ef18c60fe1..a3216850bb 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -22,10 +22,10 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_efar"
-#define DRV_VERSION	"0.4.2"
+#define DRV_VERSION	"0.4.4"
 
 /**
- *	efar_pre_reset	-	check for 40/80 pin
+ *	efar_pre_reset	-	Enable bits
  *	@ap: Port
  *
  *	Perform cable detection for the EFAR ATA interface. This is
@@ -38,18 +38,11 @@ static int efar_pre_reset(struct ata_port *ap)
 		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */
 		{ 0x43U, 1U, 0x80UL, 0x80UL },	/* port 1 */
 	};
-
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u8 tmp;
 
 	if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no]))
 		return -ENOENT;
 
-	pci_read_config_byte(pdev, 0x47, &tmp);
-	if (tmp & (2 >> ap->port_no))
-		ap->cbl = ATA_CBL_PATA40;
-	else
-		ap->cbl = ATA_CBL_PATA80;
 	return ata_std_prereset(ap);
 }
 
@@ -66,6 +59,25 @@ static void efar_error_handler(struct ata_port *ap)
 	ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
 }
 
+/**
+ *	efar_cable_detect	-	check for 40/80 pin
+ *	@ap: Port
+ *
+ *	Perform cable detection for the EFAR ATA interface. This is
+ *	different to the PIIX arrangement
+ */
+
+static int efar_cable_detect(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	u8 tmp;
+
+	pci_read_config_byte(pdev, 0x47, &tmp);
+	if (tmp & (2 >> ap->port_no))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 /**
  *	efar_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
@@ -226,14 +238,18 @@ static struct scsi_host_template efar_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static const struct ata_port_operations efar_ops = {
@@ -252,6 +268,7 @@ static const struct ata_port_operations efar_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= efar_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= efar_cable_detect,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -259,14 +276,14 @@ static const struct ata_port_operations efar_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };
 
 
@@ -315,6 +332,10 @@ static struct pci_driver efar_pci_driver = {
 	.id_table		= efar_pci_tbl,
 	.probe			= efar_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init efar_init(void)