X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_hpt3x3.c;h=ac28ec8c50aa61a19f03c704c843f50b8709ba05;hb=48be6b18336567a795bc41e4526f9adfb3a3d68e;hp=5f1d385eb592da1f2c9d6a4c8cb382afc9b6f7b0;hpb=bef986502fa398b1785a3979b1aa17cd902d3527;p=powerpc.git

diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 5f1d385eb5..ac28ec8c50 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -25,25 +25,6 @@
 #define DRV_NAME	"pata_hpt3x3"
 #define DRV_VERSION	"0.4.2"
 
-static int hpt3x3_probe_init(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA40;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	hpt3x3_probe_reset	-	reset the hpt3x3 bus
- *	@ap: ATA port to reset
- *
- *	Perform the housekeeping when doing an ATA bus reeset. We just
- *	need to force the cable type.
- */
-
-static void hpt3x3_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, hpt3x3_probe_init, ata_std_softreset, NULL, ata_std_postreset);
-}
-
 /**
  *	hpt3x3_set_piomode		-	PIO setup
  *	@ap: ATA interface
@@ -119,8 +100,10 @@ static struct scsi_host_template hpt3x3_sht = {
 	.slave_configure	= ata_scsi_slave_config,
 	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
@@ -137,8 +120,9 @@ static struct ata_port_operations hpt3x3_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= hpt3x3_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -148,14 +132,14 @@ static struct ata_port_operations hpt3x3_port_ops = {
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_pio_data_xfer,
+	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
 
 	.port_start	= ata_port_start,
-	.port_stop	= ata_port_stop,
-	.host_stop	= ata_host_stop
 };
 
 /**
@@ -164,7 +148,7 @@ static struct ata_port_operations hpt3x3_port_ops = {
  *
  *	Perform the setup required at boot and on resume.
  */
- 
+
 static void hpt3x3_init_chipset(struct pci_dev *dev)
 {
 	u16 cmd;
@@ -206,11 +190,13 @@ static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	return ata_pci_init_one(dev, port_info, 2);
 }
 
+#ifdef CONFIG_PM
 static int hpt3x3_reinit_one(struct pci_dev *dev)
 {
 	hpt3x3_init_chipset(dev);
 	return ata_pci_device_resume(dev);
 }
+#endif
 
 static const struct pci_device_id hpt3x3[] = {
 	{ PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT343), },
@@ -223,8 +209,10 @@ static struct pci_driver hpt3x3_pci_driver = {
 	.id_table	= hpt3x3,
 	.probe 		= hpt3x3_init_one,
 	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend	= ata_pci_device_suspend,
 	.resume		= hpt3x3_reinit_one,
+#endif
 };
 
 static int __init hpt3x3_init(void)