X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_jmicron.c;h=7ede3232e928eb02cbca007437a49458ffc9a7ae;hb=b23ff24436c97fb26428f3a337faf189292cc307;hp=52a2bdf3c38de3109877679c1ef25a48de65873e;hpb=ab8e823515305a93715e71b81efcbe27c6ce0f59;p=powerpc.git

diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 52a2bdf3c3..7ede3232e9 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -19,7 +19,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_jmicron"
-#define DRV_VERSION	"0.1.2"
+#define DRV_VERSION	"0.1.4"
 
 typedef enum {
 	PORT_PATA0 = 0,
@@ -128,16 +128,19 @@ static struct scsi_host_template jmicron_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	/* Special handling needed if you have sector or LBA48 limits */
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.suspend		= ata_scsi_device_suspend,
+	.resume			= ata_scsi_device_resume,
+#endif
 };
 
 static const struct ata_port_operations jmicron_ops = {
@@ -162,16 +165,16 @@ static const struct ata_port_operations jmicron_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	/* IRQ-related hooks */
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	/* Generic PATA PCI ATA helpers */
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };
 
 
@@ -203,37 +206,20 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	struct ata_port_info *port_info[2] = { &info, &info };
 
-	u32 reg;
-
-	if (id->driver_data != 368) {
-		/* Put the controller into AHCI mode in case the AHCI driver
-		   has not yet been loaded. This can be done with either
-		   function present */
-
-		/* FIXME: We may want a way to override this in future */
-		pci_write_config_byte(pdev, 0x41, 0xa1);
-	}
-
-	/* PATA controller is fn 1, AHCI is fn 0 */
-	if (PCI_FUNC(pdev->devfn) != 1)
-		return -ENODEV;
-
-	if ( id->driver_data == 365 || id->driver_data == 366) {
-		/* The 365/66 have two PATA channels, redirect the second */
-		pci_read_config_dword(pdev, 0x80, &reg);
-		reg |= (1 << 24);	/* IDE1 to PATA IDE secondary */
-		pci_write_config_dword(pdev, 0x80, reg);
-	}
-
 	return ata_pci_init_one(pdev, port_info, 2);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
-	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
-	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363},
-	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 365},
-	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 366},
-	{ PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 368},
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 361 },
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 363 },
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 365 },
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 366 },
+	{ PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
+	  PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 368 },
 
 	{ }	/* terminate list */
 };
@@ -243,6 +229,8 @@ static struct pci_driver jmicron_pci_driver = {
 	.id_table		= jmicron_pci_tbl,
 	.probe			= jmicron_init_one,
 	.remove			= ata_pci_remove_one,
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
 };
 
 static int __init jmicron_init(void)