X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_marvell.c;h=837b7fe77dc7ff1e4a97b6265e91a22d28afa1c1;hb=67ac58edf771b10f8e89bf9fe1ccf6c9b92ce063;hp=13a70ac6f1dc2f536b132229ac7706aa87e7d6e5;hpb=60f29b1e1600d89aee5e529acb4b276a6650cb8b;p=powerpc.git

diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 13a70ac6f1..837b7fe77d 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -20,16 +20,17 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_marvell"
-#define DRV_VERSION	"0.1.1"
+#define DRV_VERSION	"0.1.4"
 
 /**
  *	marvell_pre_reset	-	check for 40/80 pin
  *	@ap: Port
+ *	@deadline: deadline jiffies for the operation
  *
  *	Perform the PATA port setup we need.
  */
 
-static int marvell_pre_reset(struct ata_port *ap)
+static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	u32 devices;
@@ -53,21 +54,24 @@ static int marvell_pre_reset(struct ata_port *ap)
 	    (!(devices & 0x10)))	/* PATA enable ? */
 		return -ENOENT;
 
+	return ata_std_prereset(ap, deadline);
+}
+
+static int marvell_cable_detect(struct ata_port *ap)
+{
 	/* Cable type */
 	switch(ap->port_no)
 	{
 	case 0:
 		if (ioread8(ap->ioaddr.bmdma_addr + 1) & 1)
-			ap->cbl = ATA_CBL_PATA40;
-		else
-			ap->cbl = ATA_CBL_PATA80;
-		break;
-
+			return ATA_CBL_PATA40;
+		return ATA_CBL_PATA80;
 	case 1: /* Legacy SATA port */
-		ap->cbl = ATA_CBL_SATA;
-		break;
+		return ATA_CBL_SATA;
 	}
-	return ata_std_prereset(ap);
+
+	BUG();
+	return 0;	/* Our BUG macro needs the right markup */
 }
 
 /**
@@ -103,8 +107,10 @@ static struct scsi_host_template marvell_sht = {
 	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
 	.resume			= ata_scsi_device_resume,
 	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static const struct ata_port_operations marvell_ops = {
@@ -121,6 +127,7 @@ static const struct ata_port_operations marvell_ops = {
 	.thaw			= ata_bmdma_thaw,
 	.error_handler		= marvell_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= marvell_cable_detect,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
@@ -199,8 +206,10 @@ static struct pci_driver marvell_pci_driver = {
 	.id_table		= marvell_pci_tbl,
 	.probe			= marvell_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
 	.suspend		= ata_pci_device_suspend,
 	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init marvell_init(void)