X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_netcell.c;h=dbba5b77d79c907e0444a89a1732848cab277891;hb=42b9bebe3fea3d3ce381bc6735a3fb50e6613f06;hp=f5672de99c22d3012bb419e5956e410db3f83f74;hpb=946b92437e550d6ed80213bf54a1f383e141aede;p=powerpc.git

diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index f5672de99c..dbba5b77d7 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -16,33 +16,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_netcell"
-#define DRV_VERSION	"0.1.5"
-
-/**
- *	netcell_probe_init	-	check for 40/80 pin
- *	@ap: Port
- *
- *	Cables are handled by the RAID controller. Report 80 pin.
- */
-
-static int netcell_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-/**
- *	netcell_probe_reset - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void netcell_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.1.7"
 
 /* No PIO or DMA methods needed for this device */
 
@@ -54,16 +28,19 @@ static struct scsi_host_template netcell_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	/* Special handling needed if you have sector or LBA48 limits */
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	/* Use standard CHS mapping rules */
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static const struct ata_port_operations netcell_ops = {
@@ -78,8 +55,9 @@ static const struct ata_port_operations netcell_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= netcell_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_80wire,
 
 	/* BMDMA handling is PCI ATA format, use helpers */
 	.bmdma_setup		= ata_bmdma_setup,
@@ -88,16 +66,16 @@ static const struct ata_port_operations netcell_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= ata_qc_issue_prot,
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	/* IRQ-related hooks */
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	/* Generic PATA PCI ATA helpers */
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };
 
 
@@ -152,6 +130,10 @@ static struct pci_driver netcell_pci_driver = {
 	.id_table		= netcell_pci_tbl,
 	.probe			= netcell_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init netcell_init(void)