X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_optidma.c;h=d80b36e209cc52bc6de595d414caecb32163a975;hb=4559b438225b01942e1661759db0df55883b1bc0;hp=c6906b4215de266d595e175672554d81d2c870a2;hpb=513b046c96cc2fbce730a3474f6f7ff0c4fdd05c;p=powerpc.git

diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index c6906b4215..d80b36e209 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.3"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */
@@ -91,12 +91,12 @@ static void optidma_error_handler(struct ata_port *ap)
 
 static void optidma_unlock(struct ata_port *ap)
 {
-	unsigned long regio = ap->ioaddr.cmd_addr;
+	void __iomem *regio = ap->ioaddr.cmd_addr;
 
 	/* These 3 unlock the control register access */
-	inw(regio + 1);
-	inw(regio + 1);
-	outb(3, regio + 2);
+	ioread16(regio + 1);
+	ioread16(regio + 1);
+	iowrite8(3, regio + 2);
 }
 
 /**
@@ -108,10 +108,10 @@ static void optidma_unlock(struct ata_port *ap)
 
 static void optidma_lock(struct ata_port *ap)
 {
-	unsigned long regio = ap->ioaddr.cmd_addr;
+	void __iomem *regio = ap->ioaddr.cmd_addr;
 
 	/* Relock */
-	outb(0x83, regio + 2);
+	iowrite8(0x83, regio + 2);
 }
 
 /**
@@ -133,7 +133,7 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
 	struct ata_device *pair = ata_dev_pair(adev);
 	int pio = adev->pio_mode - XFER_PIO_0;
 	int dma = adev->dma_mode - XFER_MW_DMA_0;
-	unsigned long regio = ap->ioaddr.cmd_addr;
+	void __iomem *regio = ap->ioaddr.cmd_addr;
 	u8 addr;
 
 	/* Address table precomputed with a DCLK of 2 */
@@ -178,20 +178,20 @@ static void optidma_set_mode(struct ata_port *ap, struct ata_device *adev, u8 mo
 
 	/* Commence primary programming sequence */
 	/* First we load the device number into the timing select */
-	outb(adev->devno, regio + MISC_REG);
+	iowrite8(adev->devno, regio + MISC_REG);
 	/* Now we load the data timings into read data/write data */
 	if (mode < XFER_MW_DMA_0) {
-		outb(data_rec_timing[pci_clock][pio], regio + READ_REG);
-		outb(data_rec_timing[pci_clock][pio], regio + WRITE_REG);
+		iowrite8(data_rec_timing[pci_clock][pio], regio + READ_REG);
+		iowrite8(data_rec_timing[pci_clock][pio], regio + WRITE_REG);
 	} else if (mode < XFER_UDMA_0) {
-		outb(dma_data_rec_timing[pci_clock][dma], regio + READ_REG);
-		outb(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG);
+		iowrite8(dma_data_rec_timing[pci_clock][dma], regio + READ_REG);
+		iowrite8(dma_data_rec_timing[pci_clock][dma], regio + WRITE_REG);
 	}
 	/* Finally we load the address setup into the misc register */
-	outb(addr | adev->devno, regio + MISC_REG);
+	iowrite8(addr | adev->devno, regio + MISC_REG);
 
 	/* Programming sequence complete, timing 0 dev 0, timing 1 dev 1 */
-	outb(0x85, regio + CNTRL_REG);
+	iowrite8(0x85, regio + CNTRL_REG);
 
 	/* Switch back to IDE mode */
 	optidma_lock(ap);
@@ -352,14 +352,16 @@ static struct scsi_host_template optidma_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
 };
 
 static struct ata_port_operations optidma_port_ops = {
@@ -387,14 +389,14 @@ static struct ata_port_operations optidma_port_ops = {
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_pio_data_xfer,
+	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
 
 	.port_start	= ata_port_start,
-	.port_stop	= ata_port_stop,
-	.host_stop	= ata_host_stop
 };
 
 static struct ata_port_operations optiplus_port_ops = {
@@ -422,14 +424,14 @@ static struct ata_port_operations optiplus_port_ops = {
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
 
-	.data_xfer	= ata_pio_data_xfer,
+	.data_xfer	= ata_data_xfer,
 
 	.irq_handler	= ata_interrupt,
 	.irq_clear	= ata_bmdma_irq_clear,
+	.irq_on		= ata_irq_on,
+	.irq_ack	= ata_irq_ack,
 
 	.port_start	= ata_port_start,
-	.port_stop	= ata_port_stop,
-	.host_stop	= ata_host_stop
 };
 
 /**
@@ -521,7 +523,9 @@ static struct pci_driver optidma_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= optidma,
 	.probe 		= optidma_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ata_pci_device_resume,
 };
 
 static int __init optidma_init(void)