X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fpata_radisys.c;h=1c54673e008d0a0d2f5e7c3f821ac260d162522d;hb=169439c2e35f01e7832a9b4fc8a7446980c3d593;hp=1af83d7694d5fc704adc1525551302eabd382970;hpb=97d41e90fe61399b99d74820cb7f2d6e0fbac91d;p=powerpc.git

diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1af83d7694..1c54673e00 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -24,40 +24,12 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_radisys"
-#define DRV_VERSION	"0.4.1"
-
-/**
- *	radisys_probe_init		-	probe begin
- *	@ap: ATA port
- *
- *	Set up cable type and use generic probe init
- */
-
-static int radisys_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ATA_CBL_PATA80;
-	return ata_std_prereset(ap);
-}
-
-
-/**
- *	radisys_pata_error_handler - Probe specified port on PATA host controller
- *	@ap: Port to probe
- *	@classes:
- *
- *	LOCKING:
- *	None (inherited from caller).
- */
-
-static void radisys_pata_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
-}
+#define DRV_VERSION	"0.4.4"
 
 /**
  *	radisys_set_piomode - Initialize host controller PATA PIO timings
- *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@ap: ATA port
+ *	@adev: Device whose timings we are configuring
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *
@@ -220,14 +192,18 @@ static struct scsi_host_template radisys_sht = {
 	.can_queue		= ATA_DEF_QUEUE,
 	.this_id		= ATA_SHT_THIS_ID,
 	.sg_tablesize		= LIBATA_MAX_PRD,
-	.max_sectors		= ATA_MAX_SECTORS,
 	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
 	.emulated		= ATA_SHT_EMULATED,
 	.use_clustering		= ATA_SHT_USE_CLUSTERING,
 	.proc_name		= DRV_NAME,
 	.dma_boundary		= ATA_DMA_BOUNDARY,
 	.slave_configure	= ata_scsi_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
 	.bios_param		= ata_std_bios_param,
+#ifdef CONFIG_PM
+	.resume			= ata_scsi_device_resume,
+	.suspend		= ata_scsi_device_suspend,
+#endif
 };
 
 static const struct ata_port_operations radisys_pata_ops = {
@@ -244,8 +220,9 @@ static const struct ata_port_operations radisys_pata_ops = {
 
 	.freeze			= ata_bmdma_freeze,
 	.thaw			= ata_bmdma_thaw,
-	.error_handler		= radisys_pata_error_handler,
+	.error_handler		= ata_bmdma_error_handler,
 	.post_internal_cmd	= ata_bmdma_post_internal_cmd,
+	.cable_detect		= ata_cable_unknown,
 
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
@@ -253,14 +230,14 @@ static const struct ata_port_operations radisys_pata_ops = {
 	.bmdma_status		= ata_bmdma_status,
 	.qc_prep		= ata_qc_prep,
 	.qc_issue		= radisys_qc_issue_prot,
-	.data_xfer		= ata_pio_data_xfer,
+	.data_xfer		= ata_data_xfer,
 
 	.irq_handler		= ata_interrupt,
 	.irq_clear		= ata_bmdma_irq_clear,
+	.irq_on			= ata_irq_on,
+	.irq_ack		= ata_irq_ack,
 
 	.port_start		= ata_port_start,
-	.port_stop		= ata_port_stop,
-	.host_stop		= ata_host_stop,
 };
 
 
@@ -310,6 +287,10 @@ static struct pci_driver radisys_pci_driver = {
 	.id_table		= radisys_pci_tbl,
 	.probe			= radisys_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= ata_pci_device_resume,
+#endif
 };
 
 static int __init radisys_init(void)