X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fata%2Fsata_svw.c;h=cc07aac10e8ce37a0ee818f5ec982b3fc602c509;hb=4447d35156169cf136e829eb6b5cac2d6370f2d9;hp=46d8a94669b4401735daf626508c12981847b302;hpb=88d5a7bb75b5e8f600e79b16abaf008c7fdfd27d;p=powerpc.git diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 46d8a94669..cc07aac10e 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -53,10 +53,12 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "2.0" +#define DRV_VERSION "2.1" enum { - K2_FLAG_NO_ATAPI_DMA = (1 << 29), + /* ap->flags bits */ + K2_FLAG_SATA_8_PORTS = (1 << 24), + K2_FLAG_NO_ATAPI_DMA = (1 << 25), /* Taskfile registers offsets */ K2_SATA_TF_CMD_OFFSET = 0x00, @@ -90,17 +92,6 @@ enum { board_svw8 = 1, }; -static const struct k2_board_info { - unsigned int n_ports; - unsigned long port_flags; -} k2_board_info[] = { - /* board_svw4 */ - { 4, K2_FLAG_NO_ATAPI_DMA }, - - /* board_svw8 */ - { 8, K2_FLAG_NO_ATAPI_DMA }, -}; - static u8 k2_stat_check_status(struct ata_port *ap); @@ -116,7 +107,7 @@ static u32 k2_sata_scr_read (struct ata_port *ap, unsigned int sc_reg) { if (sc_reg > SCR_CONTROL) return 0xffffffffU; - return readl((void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + return readl((void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -125,7 +116,7 @@ static void k2_sata_scr_write (struct ata_port *ap, unsigned int sc_reg, { if (sc_reg > SCR_CONTROL) return; - writel(val, (void *) ap->ioaddr.scr_addr + (sc_reg * 4)); + writel(val, (void __iomem *) ap->ioaddr.scr_addr + (sc_reg * 4)); } @@ -135,31 +126,31 @@ static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; if (tf->ctl != ap->last_ctl) { - writeb(tf->ctl, (void __iomem *) ioaddr->ctl_addr); + writeb(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { writew(tf->feature | (((u16)tf->hob_feature) << 8), - (void __iomem *) ioaddr->feature_addr); + ioaddr->feature_addr); writew(tf->nsect | (((u16)tf->hob_nsect) << 8), - (void __iomem *) ioaddr->nsect_addr); + ioaddr->nsect_addr); writew(tf->lbal | (((u16)tf->hob_lbal) << 8), - (void __iomem *) ioaddr->lbal_addr); + ioaddr->lbal_addr); writew(tf->lbam | (((u16)tf->hob_lbam) << 8), - (void __iomem *) ioaddr->lbam_addr); + ioaddr->lbam_addr); writew(tf->lbah | (((u16)tf->hob_lbah) << 8), - (void __iomem *) ioaddr->lbah_addr); + ioaddr->lbah_addr); } else if (is_addr) { - writew(tf->feature, (void __iomem *) ioaddr->feature_addr); - writew(tf->nsect, (void __iomem *) ioaddr->nsect_addr); - writew(tf->lbal, (void __iomem *) ioaddr->lbal_addr); - writew(tf->lbam, (void __iomem *) ioaddr->lbam_addr); - writew(tf->lbah, (void __iomem *) ioaddr->lbah_addr); + writew(tf->feature, ioaddr->feature_addr); + writew(tf->nsect, ioaddr->nsect_addr); + writew(tf->lbal, ioaddr->lbal_addr); + writew(tf->lbam, ioaddr->lbam_addr); + writew(tf->lbah, ioaddr->lbah_addr); } if (tf->flags & ATA_TFLAG_DEVICE) - writeb(tf->device, (void __iomem *) ioaddr->device_addr); + writeb(tf->device, ioaddr->device_addr); ata_wait_idle(ap); } @@ -171,12 +162,12 @@ static void k2_sata_tf_read(struct ata_port *ap, struct ata_taskfile *tf) u16 nsect, lbal, lbam, lbah, feature; tf->command = k2_stat_check_status(ap); - tf->device = readw((void __iomem *)ioaddr->device_addr); - feature = readw((void __iomem *)ioaddr->error_addr); - nsect = readw((void __iomem *)ioaddr->nsect_addr); - lbal = readw((void __iomem *)ioaddr->lbal_addr); - lbam = readw((void __iomem *)ioaddr->lbam_addr); - lbah = readw((void __iomem *)ioaddr->lbah_addr); + tf->device = readw(ioaddr->device_addr); + feature = readw(ioaddr->error_addr); + nsect = readw(ioaddr->nsect_addr); + lbal = readw(ioaddr->lbal_addr); + lbam = readw(ioaddr->lbam_addr); + lbah = readw(ioaddr->lbah_addr); tf->feature = feature; tf->nsect = nsect; @@ -262,7 +253,7 @@ static void k2_bmdma_start_mmio (struct ata_queued_cmd *qc) static u8 k2_stat_check_status(struct ata_port *ap) { - return readl((void *) ap->ioaddr.status_addr); + return readl((void __iomem *) ap->ioaddr.status_addr); } #ifdef CONFIG_PPC_OF @@ -349,21 +340,42 @@ static const struct ata_port_operations k2_sata_ops = { .bmdma_status = ata_bmdma_status, .qc_prep = ata_qc_prep, .qc_issue = ata_qc_issue_prot, - .data_xfer = ata_mmio_data_xfer, + .data_xfer = ata_data_xfer, .freeze = ata_bmdma_freeze, .thaw = ata_bmdma_thaw, .error_handler = ata_bmdma_error_handler, .post_internal_cmd = ata_bmdma_post_internal_cmd, - .irq_handler = ata_interrupt, .irq_clear = ata_bmdma_irq_clear, + .irq_on = ata_irq_on, + .irq_ack = ata_irq_ack, .scr_read = k2_sata_scr_read, .scr_write = k2_sata_scr_write, .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_pci_host_stop, }; -static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) +static const struct ata_port_info k2_port_info[] = { + /* board_svw4 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &k2_sata_ops, + }, + /* board_svw8 */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA | + K2_FLAG_SATA_8_PORTS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = 0x7f, + .port_ops = &k2_sata_ops, + }, +}; + +static void k2_sata_setup_port(struct ata_ioports *port, void __iomem *base) { port->cmd_addr = base + K2_SATA_TF_CMD_OFFSET; port->data_addr = base + K2_SATA_TF_DATA_OFFSET; @@ -386,25 +398,32 @@ static void k2_sata_setup_port(struct ata_ioports *port, unsigned long base) static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_probe_ent *probe_ent = NULL; - unsigned long base; + const struct ata_port_info *ppi[] = + { &k2_port_info[ent->driver_data], NULL }; + struct ata_host *host; void __iomem *mmio_base; - const struct k2_board_info *board_info = - &k2_board_info[ent->driver_data]; - int pci_dev_busy = 0; - int rc; - int i; + int n_ports, i, rc; if (!printed_version++) dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n"); + /* allocate host */ + n_ports = 4; + if (ppi[0]->flags & K2_FLAG_SATA_8_PORTS) + n_ports = 8; + + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); + if (!host) + return -ENOMEM; + /* * If this driver happens to only be useful on Apple's K2, then * we should check that here as it has a normal Serverworks ID */ - rc = pci_enable_device(pdev); + rc = pcim_enable_device(pdev); if (rc) return rc; + /* * Check if we have resources mapped at all (second function may * have been disabled by firmware) @@ -412,36 +431,28 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e if (pci_resource_len(pdev, 5) == 0) return -ENODEV; - /* Request PCI regions */ - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pci_dev_busy = 1; - goto err_out; - } + /* Request and iomap PCI regions */ + rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME); + if (rc == -EBUSY) + pcim_pin_device(pdev); + if (rc) + return rc; + host->iomap = pcim_iomap_table(pdev); + mmio_base = host->iomap[5]; + + /* different controllers have different number of ports - currently 4 or 8 */ + /* All ports are on the same function. Multi-function device is no + * longer available. This should not be seen in any system. */ + for (i = 0; i < host->n_ports; i++) + k2_sata_setup_port(&host->ports[i]->ioaddr, + mmio_base + i * K2_SATA_PORT_OFFSET); rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); if (rc) - goto err_out_regions; + return rc; rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); if (rc) - goto err_out_regions; - - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); - if (probe_ent == NULL) { - rc = -ENOMEM; - goto err_out_regions; - } - - memset(probe_ent, 0, sizeof(*probe_ent)); - probe_ent->dev = pci_dev_to_dev(pdev); - INIT_LIST_HEAD(&probe_ent->node); - - mmio_base = pci_iomap(pdev, 5, 0); - if (mmio_base == NULL) { - rc = -ENOMEM; - goto err_out_free_ent; - } - base = (unsigned long) mmio_base; + return rc; /* Clear a magic bit in SCR1 according to Darwin, those help * some funky seagate drives (though so far, those were already @@ -454,44 +465,9 @@ static int k2_sata_init_one (struct pci_dev *pdev, const struct pci_device_id *e writel(0xffffffff, mmio_base + K2_SATA_SCR_ERROR_OFFSET); writel(0x0, mmio_base + K2_SATA_SIM_OFFSET); - probe_ent->sht = &k2_sata_sht; - probe_ent->port_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_MMIO | board_info->port_flags; - probe_ent->port_ops = &k2_sata_ops; - probe_ent->n_ports = 4; - probe_ent->irq = pdev->irq; - probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = mmio_base; - - /* We don't care much about the PIO/UDMA masks, but the core won't like us - * if we don't fill these - */ - probe_ent->pio_mask = 0x1f; - probe_ent->mwdma_mask = 0x7; - probe_ent->udma_mask = 0x7f; - - /* different controllers have different number of ports - currently 4 or 8 */ - /* All ports are on the same function. Multi-function device is no - * longer available. This should not be seen in any system. */ - for (i = 0; i < board_info->n_ports; i++) - k2_sata_setup_port(&probe_ent->port[i], base + i * K2_SATA_PORT_OFFSET); - pci_set_master(pdev); - - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); - - return 0; - -err_out_free_ent: - kfree(probe_ent); -err_out_regions: - pci_release_regions(pdev); -err_out: - if (!pci_dev_busy) - pci_disable_device(pdev); - return rc; + return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED, + &k2_sata_sht); } /* 0x240 is device ID for Apple K2 device