X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fatm%2Fambassador.c;h=b34b3829f6a9a1fa5a37fe4df0dd607dd3e76c13;hb=0b776eb5426752d4e53354ac89e3710d857e09a7;hp=afa7d750a59372c8087ae9dd8cf2fb4d5dc8c015;hpb=5f3f24faf322e54752d1df00cdb768a013de5d1f;p=powerpc.git

diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index afa7d750a5..b34b3829f6 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -32,6 +32,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/poison.h>
+#include <linux/bitrev.h>
 
 #include <asm/atomic.h>
 #include <asm/io.h>
@@ -820,7 +821,7 @@ static inline void fill_rx_pool (amb_dev * dev, unsigned char pool,
     }
     // cast needed as there is no %? for pointer differences
     PRINTD (DBG_SKB, "allocated skb at %p, head %p, area %li",
-	    skb, skb->head, (long) (skb->end - skb->head));
+	    skb, skb->head, (long) (skb_end_pointer(skb) - skb->head));
     rx.handle = virt_to_bus (skb);
     rx.host_address = cpu_to_be32 (virt_to_bus (skb->data));
     if (rx_give (dev, &rx, pool))
@@ -1039,7 +1040,7 @@ static int amb_open (struct atm_vcc * atm_vcc)
   struct atm_qos * qos;
   struct atm_trafprm * txtp;
   struct atm_trafprm * rxtp;
-  u16 tx_rate_bits;
+  u16 tx_rate_bits = -1; // hush gcc
   u16 tx_vc_bits = -1; // hush gcc
   u16 tx_frame_bits = -1; // hush gcc
   
@@ -1095,6 +1096,8 @@ static int amb_open (struct atm_vcc * atm_vcc)
 	    r = round_up;
 	  }
 	  error = make_rate (pcr, r, &tx_rate_bits, NULL);
+	  if (error)
+	    return error;
 	  tx_vc_bits = TX_UBR_CAPPED;
 	  tx_frame_bits = TX_FRAME_CAPPED;
 	}
@@ -2068,18 +2071,6 @@ static void __devinit amb_ucode_version (amb_dev * dev) {
   PRINTK (KERN_INFO, "microcode version is %u.%u", major, minor);
 }
   
-// swap bits within byte to get Ethernet ordering
-static u8 bit_swap (u8 byte)
-{
-    const u8 swap[] = {
-      0x0, 0x8, 0x4, 0xc,
-      0x2, 0xa, 0x6, 0xe,
-      0x1, 0x9, 0x5, 0xd,
-      0x3, 0xb, 0x7, 0xf
-    };
-    return ((swap[byte & 0xf]<<4) | swap[byte>>4]);
-}
-
 // get end station address
 static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
   u32 lower4;
@@ -2101,9 +2092,9 @@ static void __devinit amb_esi (amb_dev * dev, u8 * esi) {
     PRINTDB (DBG_INIT, "ESI:");
     for (i = 0; i < ESI_LEN; ++i) {
       if (i < 4)
-	  esi[i] = bit_swap (lower4>>(8*i));
+	  esi[i] = bitrev8(lower4>>(8*i));
       else
-	  esi[i] = bit_swap (upper2>>(8*(i-4)));
+	  esi[i] = bitrev8(upper2>>(8*(i-4)));
       PRINTDM (DBG_INIT, " %02x", esi[i]);
     }