X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fchar%2FKconfig;h=4135d8c5bcae1e2d6f4278764bb42a6bbea13a33;hb=925d70d64bfeccb669c0750943585944abb28b51;hp=fdf4370db994ca6f17be96070a0b2153a087764a;hpb=2ecc26b87a2b3e8650d3c7fe3fc85a8c73d5560d;p=powerpc.git

diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index fdf4370db9..4135d8c5bc 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -80,7 +80,7 @@ config SERIAL_NONSTANDARD
 
 config COMPUTONE
 	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD
 	---help---
 	  This driver supports the entire family of Intelliport II/Plus
 	  controllers with the exception of the MicroChannel controllers and
@@ -153,7 +153,7 @@ config DIGIEPCA
 
 config ESPSERIAL
 	tristate "Hayes ESP serial port support"
-	depends on SERIAL_NONSTANDARD && ISA && BROKEN_ON_SMP && ISA_DMA_API
+	depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API
 	help
 	  This is a driver which supports Hayes ESP serial ports.  Both single
 	  port cards and multiport cards are supported.  Make sure to read
@@ -166,7 +166,7 @@ config ESPSERIAL
 
 config MOXA_INTELLIO
 	tristate "Moxa Intellio support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD
 	help
 	  Say Y here if you have a Moxa Intellio multiport serial card.
 
@@ -220,6 +220,14 @@ config SYNCLINKMP
 	  The module will be called synclinkmp.  If you want to do that, say M
 	  here.
 
+config SYNCLINK_GT
+	tristate "SyncLink GT/AC support"
+	depends on SERIAL_NONSTANDARD
+	help
+	  Support for SyncLink GT and SyncLink AC families of
+	  synchronous and asynchronous serial adapters
+	  manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
 config N_HDLC
 	tristate "HDLC line discipline support"
 	depends on SERIAL_NONSTANDARD
@@ -282,7 +290,7 @@ config SX
 
 config RIO
 	tristate "Specialix RIO system support"
-	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP
+	depends on SERIAL_NONSTANDARD && BROKEN_ON_SMP && !64BIT
 	help
 	  This is a driver for the Specialix RIO, a smart serial card which
 	  drives an outboard box that can support up to 128 ports.  Product
@@ -687,7 +695,7 @@ config NVRAM
 
 config RTC
 	tristate "Enhanced Real Time Clock Support"
-	depends on !PPC32 && !PARISC && !IA64 && !M68K
+	depends on !PPC32 && !PARISC && !IA64 && !M68K && (!SPARC || PCI) && !FRV
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -735,7 +743,7 @@ config SGI_IP27_RTC
 
 config GEN_RTC
 	tristate "Generic /dev/rtc emulation"
-	depends on RTC!=y && !IA64 && !ARM && !PPC64 && !M32R && !SPARC32 && !SPARC64
+	depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV
 	---help---
 	  If you say Y here and create a character special file /dev/rtc with
 	  major number 10 and minor number 135 using mknod ("man mknod"), you
@@ -873,16 +881,6 @@ config FTAPE
 	  module. To compile this driver as a module, choose M here: the
 	  module will be called ftape.
 
-	  Note that the Ftape-HOWTO is out of date (sorry) and documents the
-	  older version 2.08 of this software but still contains useful
-	  information.  There is a web page with more recent documentation at
-	  <http://www.instmath.rwth-aachen.de/~heine/ftape/>.  This page
-	  always contains the latest release of the ftape driver and useful
-	  information (backup software, ftape related patches and
-	  documentation, FAQ).  Note that the file system interface has
-	  changed quite a bit compared to previous versions of ftape.  Please
-	  read <file:Documentation/ftape.txt>.
-
 source "drivers/char/ftape/Kconfig"
 
 endmenu
@@ -928,6 +926,15 @@ config SCx200_GPIO
 
 	  If compiled as a module, it will be called scx200_gpio.
 
+config CS5535_GPIO
+	tristate "AMD CS5535/CS5536 GPIO (Geode Companion Device)"
+	depends on X86_32
+	help
+	  Give userspace access to the GPIO pins on the AMD CS5535 and
+	  CS5536 Geode companion devices.
+
+	  If compiled as a module, it will be called cs5535_gpio.
+
 config GPIO_VR41XX
 	tristate "NEC VR4100 series General-purpose I/O Unit support"
 	depends on CPU_VR41XX
@@ -943,6 +950,15 @@ config RAW_DRIVER
           Applications should simply open the device (eg /dev/hda1)
           with the O_DIRECT flag.
 
+config MAX_RAW_DEVS
+	int "Maximum number of RAW devices to support (1-8192)"
+	depends on RAW_DRIVER
+	default "256"
+	help
+	  The maximum number of RAW devices that are supported.
+	  Default is 256. Increase this number in case you need lots of
+	  raw devices.
+
 config HPET
 	bool "HPET - High Precision Event Timer" if (X86 || IA64)
 	default n
@@ -974,18 +990,9 @@ config HPET_MMAP
 	  exposed to the user.  If this applies to your hardware,
 	  say N here.
 
-config MAX_RAW_DEVS
-	int "Maximum number of RAW devices to support (1-8192)"
-	depends on RAW_DRIVER
-	default "256"
-	help
-	  The maximum number of RAW devices that are supported.
-	  Default is 256. Increase this number in case you need lots of
-	  raw devices.
-
 config HANGCHECK_TIMER
 	tristate "Hangcheck timer"
-	depends on X86 || IA64 || PPC64 || ARCH_S390
+	depends on X86 || IA64 || PPC64 || S390
 	help
 	  The hangcheck-timer module detects when the system has gone
 	  out to lunch past a certain margin.  It can reboot the system