X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fmmc%2Fau1xmmc.c;h=8d84b045bc83637df61dea3c83467ba63410654e;hb=d56a3e380085bf45cc2adba80c4e6490ba644231;hp=aaf04638054e64148babae42a6e18e12079019cb;hpb=ba264b340396b8dd7348ef8531e5ac003a34ff4e;p=powerpc.git diff --git a/drivers/mmc/au1xmmc.c b/drivers/mmc/au1xmmc.c index aaf0463805..8d84b045bc 100644 --- a/drivers/mmc/au1xmmc.c +++ b/drivers/mmc/au1xmmc.c @@ -37,7 +37,7 @@ #include #include #include -#include +#include #include #include #include @@ -194,7 +194,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait, u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT); - switch(cmd->flags) { + switch (mmc_resp_type(cmd)) { case MMC_RSP_R1: mmccmd |= SD_CMD_RT_1; break; @@ -483,34 +483,35 @@ static void au1xmmc_cmd_complete(struct au1xmmc_host *host, u32 status) cmd = mrq->cmd; cmd->error = MMC_ERR_NONE; - if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_SHORT) { - - /* Techincally, we should be getting all 48 bits of the response - * (SD_RESP1 + SD_RESP2), but because our response omits the CRC, - * our data ends up being shifted 8 bits to the right. In this case, - * that means that the OSR data starts at bit 31, so we can just - * read RESP0 and return that - */ - - cmd->resp[0] = au_readl(host->iobase + SD_RESP0); - } - else if ((cmd->flags & MMC_RSP_MASK) == MMC_RSP_LONG) { - u32 r[4]; - int i; - - r[0] = au_readl(host->iobase + SD_RESP3); - r[1] = au_readl(host->iobase + SD_RESP2); - r[2] = au_readl(host->iobase + SD_RESP1); - r[3] = au_readl(host->iobase + SD_RESP0); - - /* The CRC is omitted from the response, so really we only got - * 120 bytes, but the engine expects 128 bits, so we have to shift - * things up - */ - - for(i = 0; i < 4; i++) { - cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8; - if (i != 3) cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24; + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + u32 r[4]; + int i; + + r[0] = au_readl(host->iobase + SD_RESP3); + r[1] = au_readl(host->iobase + SD_RESP2); + r[2] = au_readl(host->iobase + SD_RESP1); + r[3] = au_readl(host->iobase + SD_RESP0); + + /* The CRC is omitted from the response, so really + * we only got 120 bytes, but the engine expects + * 128 bits, so we have to shift things up + */ + + for(i = 0; i < 4; i++) { + cmd->resp[i] = (r[i] & 0x00FFFFFF) << 8; + if (i != 3) + cmd->resp[i] |= (r[i + 1] & 0xFF000000) >> 24; + } + } else { + /* Techincally, we should be getting all 48 bits of + * the response (SD_RESP1 + SD_RESP2), but because + * our response omits the CRC, our data ends up + * being shifted 8 bits to the right. In this case, + * that means that the OSR data starts at bit 31, + * so we can just read RESP0 and return that + */ + cmd->resp[0] = au_readl(host->iobase + SD_RESP0); } } @@ -739,7 +740,6 @@ static void au1xmmc_set_ios(struct mmc_host* mmc, struct mmc_ios* ios) static void au1xmmc_dma_callback(int irq, void *dev_id, struct pt_regs *regs) { struct au1xmmc_host *host = (struct au1xmmc_host *) dev_id; - u32 status; /* Avoid spurious interrupts */ @@ -886,7 +886,7 @@ struct mmc_host_ops au1xmmc_ops = { .set_ios = au1xmmc_set_ios, }; -static int au1xmmc_probe(struct device *dev) +static int __devinit au1xmmc_probe(struct platform_device *pdev) { int i, ret = 0; @@ -903,7 +903,7 @@ static int au1xmmc_probe(struct device *dev) disable_irq(AU1100_SD_IRQ); for(i = 0; i < AU1XMMC_CONTROLLER_COUNT; i++) { - struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), dev); + struct mmc_host *mmc = mmc_alloc_host(sizeof(struct au1xmmc_host), &pdev->dev); struct au1xmmc_host *host = 0; if (!mmc) { @@ -966,7 +966,7 @@ static int au1xmmc_probe(struct device *dev) return 0; } -static int au1xmmc_remove(struct device *dev) +static int __devexit au1xmmc_remove(struct platform_device *pdev) { int i; @@ -996,23 +996,24 @@ static int au1xmmc_remove(struct device *dev) return 0; } -static struct device_driver au1xmmc_driver = { - .name = DRIVER_NAME, - .bus = &platform_bus_type, +static struct platform_driver au1xmmc_driver = { .probe = au1xmmc_probe, .remove = au1xmmc_remove, .suspend = NULL, - .resume = NULL + .resume = NULL, + .driver = { + .name = DRIVER_NAME, + }, }; static int __init au1xmmc_init(void) { - return driver_register(&au1xmmc_driver); + return platform_driver_register(&au1xmmc_driver); } static void __exit au1xmmc_exit(void) { - driver_unregister(&au1xmmc_driver); + platform_driver_unregister(&au1xmmc_driver); } module_init(au1xmmc_init);