X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fnet%2FKconfig;h=bdaaad8f2123d5410c1985ceb526e200bb1958e6;hb=38bb6b288bf4fb954a3793e57c7339774c842a54;hp=840bfed312f6bd1059ecfa89850386e62200fa55;hpb=75e47b36004d136edff68295420424cba3a5ccd0;p=powerpc.git

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 840bfed312..bdaaad8f21 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1087,7 +1087,8 @@ config NE2000
 	  without a specific driver are compatible with NE2000.
 
 	  If you have a PCI NE2000 card however, say N here and Y to "PCI
-	  NE2000 support", above. If you have a NE2000 card and are running on
+	  NE2000 and clone support" under "EISA, VLB, PCI and on board
+	  controllers" below. If you have a NE2000 card and are running on
 	  an MCA system (a bus system used on some IBM PS/2 computers and
 	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
 	  below.
@@ -1371,8 +1372,8 @@ config B44
 	  called b44.
 
 config FORCEDETH
-	tristate "Reverse Engineered nForce Ethernet support (EXPERIMENTAL)"
-	depends on NET_PCI && PCI && EXPERIMENTAL
+	tristate "nForce Ethernet support"
+	depends on NET_PCI && PCI
 	help
 	  If you have a network (Ethernet) controller of this type, say Y and
 	  read the Ethernet-HOWTO, available from
@@ -1613,11 +1614,7 @@ config SIS900
 	---help---
 	  This is a driver for the Fast Ethernet PCI network cards based on
 	  the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
-	  SiS 630 and SiS 540 chipsets.  If you have one of those, say Y and
-	  read the Ethernet-HOWTO, available at
-	  <http://www.tldp.org/docs.html#howto>.  Please read
-	  <file:Documentation/networking/sis900.txt> and comments at the
-	  beginning of <file:drivers/net/sis900.c> for more information.
+	  SiS 630 and SiS 540 chipsets.
 
 	  This driver also supports AMD 79C901 HomePNA so that you can use
 	  your phone line as a network cable.
@@ -1917,7 +1914,7 @@ config E1000_DISABLE_PACKET_SPLIT
 	depends on E1000
 	help
 	  Say Y here if you want to use the legacy receive path for PCI express
-	  hadware.
+	  hardware.
 
 	  If in doubt, say N.
 
@@ -2175,6 +2172,7 @@ config BNX2
 config SPIDER_NET
 	tristate "Spider Gigabit Ethernet driver"
 	depends on PCI && PPC_CELL
+	select FW_LOADER
 	help
 	  This driver supports the Gigabit Ethernet chips present on the
 	  Cell Processor-Based Blades from IBM.
@@ -2194,6 +2192,7 @@ config GFAR_NAPI
 config MV643XX_ETH
 	tristate "MV-643XX Ethernet support"
 	depends on MOMENCO_OCELOT_C || MOMENCO_JAGUAR_ATX || MV64360 || MOMENCO_OCELOT_3 || PPC_MULTIPLATFORM
+	select MII
 	help
 	  This driver supports the gigabit Ethernet on the Marvell MV643XX
 	  chipset which is used in the Momenco Ocelot C and Jaguar ATX and
@@ -2314,13 +2313,11 @@ config S2IO_NAPI
 
 endmenu
 
-if !UML
 source "drivers/net/tokenring/Kconfig"
 
 source "drivers/net/wireless/Kconfig"
 
 source "drivers/net/pcmcia/Kconfig"
-endif
 
 source "drivers/net/wan/Kconfig"