X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fsb1000.c;h=a1789ae59278a043efcd73d0d88be4fabbbc0a0f;hb=26d36b642e2f024019f94819284a11273807571d;hp=d6388e1533f09778578a0eee49dad0d3dbed8af2;hpb=d498a2c76568d3bb5add06390f077b1a423b0794;p=powerpc.git

diff --git a/drivers/net/sb1000.c b/drivers/net/sb1000.c
index d6388e1533..a1789ae592 100644
--- a/drivers/net/sb1000.c
+++ b/drivers/net/sb1000.c
@@ -28,7 +28,7 @@
 
 	Small changes to make it work with 2.1.x kernels. Hopefully,
 	nothing major will change before official release of Linux 2.2.
-	
+
 	Merged with 2.2 - Alan Cox
 */
 
@@ -59,7 +59,7 @@ static char version[] = "sb1000.c:v1.1.2 6/01/98 (fventuri@mediaone.net)\n";
 #ifdef SB1000_DEBUG
 static int sb1000_debug = SB1000_DEBUG;
 #else
-static int sb1000_debug = 1;
+static const int sb1000_debug = 1;
 #endif
 
 static const int SB1000_IO_EXTENT = 8;
@@ -94,7 +94,7 @@ static inline int card_wait_for_busy_clear(const int ioaddr[],
 	const char* name);
 static inline int card_wait_for_ready(const int ioaddr[], const char* name,
 	unsigned char in[]);
-static inline int card_send_command(const int ioaddr[], const char* name,
+static int card_send_command(const int ioaddr[], const char* name,
 	const unsigned char out[], unsigned char in[]);
 
 /* SB1000 hardware routines to be used during frame rx interrupt */
@@ -143,7 +143,7 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
 	unsigned short ioaddr[2], irq;
 	unsigned int serial_number;
 	int error = -ENODEV;
-	
+
 	if (pnp_device_attach(pdev) < 0)
 		return -ENODEV;
 	if (pnp_activate_dev(pdev) < 0)
@@ -153,12 +153,12 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
 		goto out_disable;
 	if (!pnp_irq_valid(pdev, 0))
 		goto out_disable;
-		
+
 	serial_number = pdev->card->serial;
-		
+
 	ioaddr[0] = pnp_port_start(pdev, 0);
 	ioaddr[1] = pnp_port_start(pdev, 0);
-		
+
 	irq = pnp_irq(pdev, 0);
 
 	if (!request_region(ioaddr[0], 16, "sb1000"))
@@ -172,7 +172,7 @@ sb1000_probe_one(struct pnp_dev *pdev, const struct pnp_device_id *id)
 		goto out_release_regions;
 	}
 
-		 
+
 	dev->base_addr = ioaddr[0];
 	/* mem_start holds the second I/O address */
 	dev->mem_start = ioaddr[1];
@@ -246,7 +246,7 @@ static struct pnp_driver sb1000_driver = {
 	.remove		= sb1000_remove_one,
 };
 
-
+
 /*
  * SB1000 hardware routines to be used during open/configuration phases
  */
@@ -309,7 +309,7 @@ card_wait_for_ready(const int ioaddr[], const char* name, unsigned char in[])
 }
 
 /* Card Send Command (cannot be used during an interrupt) */
-static inline int
+static int
 card_send_command(const int ioaddr[], const char* name,
 	const unsigned char out[], unsigned char in[])
 {
@@ -351,7 +351,7 @@ card_send_command(const int ioaddr[], const char* name,
 	return 0;
 }
 
-
+
 /*
  * SB1000 hardware routines to be used during frame rx interrupt
  */
@@ -449,7 +449,7 @@ sb1000_issue_read_command(const int ioaddr[], const char* name)
 	return;
 }
 
-
+
 /*
  * SB1000 commands for open/configuration
  */
@@ -697,7 +697,7 @@ sb1000_set_PIDs(const int ioaddr[], const char* name, const short PID[])
 	return sb1000_end_get_set_command(ioaddr, name);
 }
 
-
+
 static inline void
 sb1000_print_status_buffer(const char* name, unsigned char st[],
 	unsigned char buffer[], int size)
@@ -916,7 +916,7 @@ sb1000_error_dpc(struct net_device *dev)
 	return;
 }
 
-
+
 /*
  * Linux interface functions
  */
@@ -1155,7 +1155,7 @@ static int sb1000_close(struct net_device *dev)
 		printk(KERN_DEBUG "%s: Shutting down sb1000.\n", dev->name);
 
 	netif_stop_queue(dev);
-	
+
 	ioaddr[0] = dev->base_addr;
 	/* mem_start holds the second I/O address */
 	ioaddr[1] = dev->mem_start;