X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fsky2.c;h=9e31efeea7c855af7fd9ac535ec71688d5b7a61c;hb=2bffc23a01a489ad46ba7d61a1a657cecec87cc8;hp=5a5289b7a8850bd397151c21e7e739a009bbe981;hpb=24fcbacedb0d83cabc6761acbecfbf751265ce52;p=powerpc.git

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 5a5289b7a8..9e31efeea7 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -683,7 +683,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
 	sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
 	if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
-		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
+		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 512/8);
 		sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
 		if (hw->dev[port]->mtu > ETH_DATA_LEN) {
 			/* set Tx GMAC FIFO Almost Empty Threshold */
@@ -2220,8 +2220,7 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 		/* PCI-Express uncorrectable Error occurred */
 		u32 pex_err;
 
-		pex_err = sky2_pci_read32(hw,
-					  hw->err_cap + PCI_ERR_UNCOR_STATUS);
+		pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
 
 		if (net_ratelimit())
 			printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
@@ -2229,20 +2228,15 @@ static void sky2_hw_intr(struct sky2_hw *hw)
 
 		/* clear the interrupt */
 		sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-		sky2_pci_write32(hw,
-				 hw->err_cap + PCI_ERR_UNCOR_STATUS,
-				 0xffffffffUL);
+		sky2_pci_write32(hw, PEX_UNC_ERR_STAT,
+				       0xffffffffUL);
 		sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
 
-
-		/* In case of fatal error mask off to keep from getting stuck */
-		if (pex_err & (PCI_ERR_UNC_POISON_TLP | PCI_ERR_UNC_FCP
-			       | PCI_ERR_UNC_DLP)) {
+		if (pex_err & PEX_FATAL_ERRORS) {
 			u32 hwmsk = sky2_read32(hw, B0_HWE_IMSK);
 			hwmsk &= ~Y2_IS_PCI_EXP;
 			sky2_write32(hw, B0_HWE_IMSK, hwmsk);
 		}
-
 	}
 
 	if (status & Y2_HWE_L1_MASK)
@@ -2423,7 +2417,6 @@ static int sky2_reset(struct sky2_hw *hw)
 	u16 status;
 	u8 t8;
 	int i;
-	u32 msk;
 
 	sky2_write8(hw, B0_CTST, CS_RST_CLR);
 
@@ -2464,13 +2457,9 @@ static int sky2_reset(struct sky2_hw *hw)
 	sky2_write8(hw, B0_CTST, CS_MRST_CLR);
 
 	/* clear any PEX errors */
-	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP)) {
-		hw->err_cap = pci_find_ext_capability(hw->pdev, PCI_EXT_CAP_ID_ERR);
-		if (hw->err_cap)
-			sky2_pci_write32(hw,
-					 hw->err_cap + PCI_ERR_UNCOR_STATUS,
-					 0xffffffffUL);
-	}
+	if (pci_find_capability(hw->pdev, PCI_CAP_ID_EXP))
+		sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
+
 
 	hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
 	hw->ports = 1;
@@ -2527,10 +2516,7 @@ static int sky2_reset(struct sky2_hw *hw)
 		sky2_write8(hw, RAM_BUFFER(i, B3_RI_RTO_XS2), SK_RI_TO_53);
 	}
 
-	msk = Y2_HWE_ALL_MASK;
-	if (!hw->err_cap)
-		msk &= ~Y2_IS_PCI_EXP;
-	sky2_write32(hw, B0_HWE_IMSK, msk);
+	sky2_write32(hw, B0_HWE_IMSK, Y2_HWE_ALL_MASK);
 
 	for (i = 0; i < hw->ports; i++)
 		sky2_gmac_reset(hw, i);
@@ -3340,9 +3326,8 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 
 	if (!hw->msi_detected) {
 		/* MSI test failed, go back to INTx mode */
-		printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
-		       "switching to INTx mode. Please report this failure to "
-		       "the PCI maintainer and include system chipset information.\n",
+		printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
+		       "switching to INTx mode.\n",
 		       pci_name(pdev));
 
 		err = -EOPNOTSUPP;
@@ -3350,6 +3335,7 @@ static int __devinit sky2_test_msi(struct sky2_hw *hw)
 	}
 
 	sky2_write32(hw, B0_IMSK, 0);
+	sky2_read32(hw, B0_IMSK);
 
 	free_irq(pdev->irq, hw);