X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fpci%2Fhotplug%2Fpciehp_ctrl.c;h=5e582eca21d8df27f2a1bf83314781e22047c3ab;hb=3be4bb06b53df2c0a760eeaa5f53448faddedfca;hp=d07d4194bc29740a895c81fde0703a1957a77276;hpb=a8a2be949267cb0d1d933a92d9fb43eda4f4fe88;p=powerpc.git diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index d07d4194bc..5e582eca21 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -27,15 +27,9 @@ * */ -#include #include #include #include -#include -#include -#include -#include -#include #include #include #include "../pci.h" @@ -55,22 +49,18 @@ u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - ctrl->next_event = (ctrl->next_event + 1) % 10; + ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; taskInfo->hp_slot = hp_slot; rc++; @@ -112,24 +102,20 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) struct slot *p_slot; u8 rc = 0; u8 getstatus; - struct pci_func *func; struct event_info *taskInfo; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % 10; + ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; taskInfo->hp_slot = hp_slot; rc++; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (getstatus) { @@ -137,14 +123,12 @@ u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id) * Switch opened */ info("Latch open on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0; taskInfo->event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ info("Latch close on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->switch_save = 0x10; taskInfo->event_type = INT_SWITCH_CLOSE; } @@ -158,20 +142,17 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) { struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; - u8 rc = 0; - struct pci_func *func; + u8 presence_save, rc = 0; struct event_info *taskInfo; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* This is the structure that tells the worker thread * what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % 10; + ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; taskInfo->hp_slot = hp_slot; rc++; @@ -180,8 +161,8 @@ u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id) /* Switch is open, assume a presence change * Save the presence state */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); - if (func->presence_save) { + p_slot->hpc_ops->get_adapter_status(p_slot, &presence_save); + if (presence_save) { /* * Card Present */ @@ -206,19 +187,16 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) struct controller *ctrl = (struct controller *) inst_id; struct slot *p_slot; u8 rc = 0; - struct pci_func *func; struct event_info *taskInfo; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - /* this is the structure that tells the worker thread * what to do */ taskInfo = &(ctrl->event_queue[ctrl->next_event]); - ctrl->next_event = (ctrl->next_event + 1) % 10; + ctrl->next_event = (ctrl->next_event + 1) % MAX_EVENTS; taskInfo->hp_slot = hp_slot; rc++; @@ -229,7 +207,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) * power fault Cleared */ info("Power fault cleared on Slot(%d)\n", ctrl->first_slot + hp_slot); - func->status = 0x00; + p_slot->status = 0x00; taskInfo->event_type = INT_POWER_FAULT_CLEAR; } else { /* @@ -238,7 +216,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) info("Power fault on Slot(%d)\n", ctrl->first_slot + hp_slot); taskInfo->event_type = INT_POWER_FAULT; /* set power fault status for this board */ - func->status = 0xFF; + p_slot->status = 0xFF; info("power fault bit %x set\n", hp_slot); } if (rc) @@ -247,187 +225,6 @@ u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id) return rc; } -/** - * pciehp_slot_create - Creates a node and adds it to the proper bus. - * @busnumber - bus where new node is to be located - * - * Returns pointer to the new node or NULL if unsuccessful - */ -struct pci_func *pciehp_slot_create(u8 busnumber) -{ - struct pci_func *new_slot; - struct pci_func *next; - dbg("%s: busnumber %x\n", __FUNCTION__, busnumber); - new_slot = kmalloc(sizeof(struct pci_func), GFP_KERNEL); - - if (new_slot == NULL) - return new_slot; - - memset(new_slot, 0, sizeof(struct pci_func)); - - new_slot->next = NULL; - new_slot->configured = 1; - - if (pciehp_slot_list[busnumber] == NULL) { - pciehp_slot_list[busnumber] = new_slot; - } else { - next = pciehp_slot_list[busnumber]; - while (next->next != NULL) - next = next->next; - next->next = new_slot; - } - return new_slot; -} - - -/** - * slot_remove - Removes a node from the linked list of slots. - * @old_slot: slot to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int slot_remove(struct pci_func * old_slot) -{ - struct pci_func *next; - - if (old_slot == NULL) - return 1; - - next = pciehp_slot_list[old_slot->bus]; - - if (next == NULL) - return 1; - - if (next == old_slot) { - pciehp_slot_list[old_slot->bus] = old_slot->next; - kfree(old_slot); - return 0; - } - - while ((next->next != old_slot) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == old_slot) { - next->next = old_slot->next; - kfree(old_slot); - return 0; - } else - return 2; -} - - -/** - * bridge_slot_remove - Removes a node from the linked list of slots. - * @bridge: bridge to remove - * - * Returns 0 if successful, !0 otherwise. - */ -static int bridge_slot_remove(struct pci_func *bridge) -{ - u8 subordinateBus, secondaryBus; - u8 tempBus; - struct pci_func *next; - - if (bridge == NULL) - return 1; - - secondaryBus = (bridge->config_space[0x06] >> 8) & 0xFF; - subordinateBus = (bridge->config_space[0x06] >> 16) & 0xFF; - - for (tempBus = secondaryBus; tempBus <= subordinateBus; tempBus++) { - next = pciehp_slot_list[tempBus]; - - while (!slot_remove(next)) { - next = pciehp_slot_list[tempBus]; - } - } - - next = pciehp_slot_list[bridge->bus]; - - if (next == NULL) { - return 1; - } - - if (next == bridge) { - pciehp_slot_list[bridge->bus] = bridge->next; - kfree(bridge); - return 0; - } - - while ((next->next != bridge) && (next->next != NULL)) { - next = next->next; - } - - if (next->next == bridge) { - next->next = bridge->next; - kfree(bridge); - return 0; - } else - return 2; -} - - -/** - * pciehp_slot_find - Looks for a node by bus, and device, multiple functions accessed - * @bus: bus to find - * @device: device to find - * @index: is 0 for first function found, 1 for the second... - * - * Returns pointer to the node if successful, %NULL otherwise. - */ -struct pci_func *pciehp_slot_find(u8 bus, u8 device, u8 index) -{ - int found = -1; - struct pci_func *func; - - func = pciehp_slot_list[bus]; - dbg("%s: bus %x device %x index %x\n", - __FUNCTION__, bus, device, index); - if (func != NULL) { - dbg("%s: func-> bus %x device %x function %x pci_dev %p\n", - __FUNCTION__, func->bus, func->device, func->function, - func->pci_dev); - } else - dbg("%s: func == NULL\n", __FUNCTION__); - - if ((func == NULL) || ((func->device == device) && (index == 0))) - return func; - - if (func->device == device) - found++; - - while (func->next != NULL) { - func = func->next; - - dbg("%s: In while loop, func-> bus %x device %x function %x pci_dev %p\n", - __FUNCTION__, func->bus, func->device, func->function, - func->pci_dev); - if (func->device == device) - found++; - dbg("%s: while loop, found %d, index %d\n", __FUNCTION__, - found, index); - - if ((found == index) || (func->function == index)) { - dbg("%s: Found bus %x dev %x func %x\n", __FUNCTION__, - func->bus, func->device, func->function); - return func; - } - } - - return NULL; -} - -static int is_bridge(struct pci_func * func) -{ - /* Check the header type */ - if (((func->config_space[0x03] >> 16) & 0xFF) == 0x01) - return 1; - else - return 0; -} - - /* The following routines constitute the bulk of the hotplug controller logic */ @@ -472,17 +269,17 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) * Configures board * */ -static u32 board_added(struct pci_func * func, struct controller * ctrl) +static int board_added(struct slot *p_slot) { u8 hp_slot; - u32 temp_register = 0xFFFFFFFF; - u32 rc = 0; - struct slot *p_slot; + int rc = 0; + struct controller *ctrl = p_slot->ctrl; - p_slot = pciehp_find_slot(ctrl, func->device); - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; - dbg("%s: func->device, slot_offset, hp_slot = %d, %d ,%d\n", __FUNCTION__, func->device, ctrl->slot_device_offset, hp_slot); + dbg("%s: slot device, slot offset, hp slot = %d, %d ,%d\n", + __FUNCTION__, p_slot->device, + ctrl->slot_device_offset, hp_slot); /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -510,9 +307,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) up(&ctrl->crit_sect); /* Wait for ~1 second */ - dbg("%s: before long_delay\n", __FUNCTION__); wait_for_ctrl_irq (ctrl); - dbg("%s: afterlong_delay\n", __FUNCTION__); /* Check link training status */ rc = p_slot->hpc_ops->check_lnk_status(ctrl); @@ -522,15 +317,13 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) return rc; } - dbg("%s: func status = %x\n", __FUNCTION__, func->status); + dbg("%s: slot status = %x\n", __FUNCTION__, p_slot->status); /* Check for a power fault */ - if (func->status == 0xFF) { + if (p_slot->status == 0xFF) { /* power fault occurred, but it was benign */ - temp_register = 0xFFFFFFFF; - dbg("%s: temp register set to %x by power fault\n", __FUNCTION__, temp_register); rc = POWER_FAILURE; - func->status = 0; + p_slot->status = 0; goto err_exit; } @@ -541,10 +334,7 @@ static u32 board_added(struct pci_func * func, struct controller * ctrl) goto err_exit; } - pciehp_save_slot_config(ctrl, func); - func->status = 0; - func->switch_save = 0x10; - func->is_a_board = 0x01; + p_slot->status = 0; /* * Some PCI Express root ports require fixup after hot-plug operation. @@ -575,30 +365,25 @@ err_exit: * remove_board - Turns off slot and LED's * */ -static u32 remove_board(struct pci_func *func, struct controller *ctrl) +static int remove_board(struct slot *p_slot) { u8 device; u8 hp_slot; - u32 rc; - struct slot *p_slot; - - if (func == NULL) - return 1; + int rc; + struct controller *ctrl = p_slot->ctrl; - if (pciehp_unconfigure_device(func)) + if (pciehp_unconfigure_device(p_slot)) return 1; - device = func->device; + device = p_slot->device; - hp_slot = func->device - ctrl->slot_device_offset; + hp_slot = p_slot->device - ctrl->slot_device_offset; p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot); /* Change status to shutdown */ - if (func->is_a_board) - func->status = 0x01; - func->configured = 0; + p_slot->status = 0x01; /* Wait for exclusive access to hardware */ down(&ctrl->crit_sect); @@ -626,36 +411,6 @@ static u32 remove_board(struct pci_func *func, struct controller *ctrl) /* Done with exclusive hardware access */ up(&ctrl->crit_sect); - if (ctrl->add_support) { - while (func) { - if (is_bridge(func)) { - dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", - ctrl->seg, func->bus, func->device, func->function); - bridge_slot_remove(func); - } else { - dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n", - ctrl->seg, func->bus, func->device, func->function); - slot_remove(func); - } - - func = pciehp_slot_find(ctrl->slot_bus, device, 0); - } - - /* Setup slot structure with entry for empty slot */ - func = pciehp_slot_create(ctrl->slot_bus); - - if (func == NULL) { - return 1; - } - - func->bus = ctrl->slot_bus; - func->device = device; - func->function = 0; - func->configured = 0; - func->switch_save = 0x10; - func->is_a_board = 0; - } - return 0; } @@ -689,13 +444,15 @@ static void pciehp_pushbutton_thread(unsigned long slot) p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (getstatus) { p_slot->state = POWEROFF_STATE; - dbg("In power_down_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + dbg("%s: disabling bus:device(%x:%x)\n", __FUNCTION__, + p_slot->bus, p_slot->device); pciehp_disable_slot(p_slot); p_slot->state = STATIC_STATE; } else { p_slot->state = POWERON_STATE; - dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + dbg("%s: adding bus:device(%x:%x)\n", __FUNCTION__, + p_slot->bus, p_slot->device); if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { /* Wait for exclusive access to hardware */ @@ -737,13 +494,15 @@ static void pciehp_surprise_rm_thread(unsigned long slot) p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (!getstatus) { p_slot->state = POWEROFF_STATE; - dbg("In removing board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + dbg("%s: removing bus:device(%x:%x)\n", + __FUNCTION__, p_slot->bus, p_slot->device); pciehp_disable_slot(p_slot); p_slot->state = STATIC_STATE; } else { p_slot->state = POWERON_STATE; - dbg("In add_board, b:d(%x:%x)\n", p_slot->bus, p_slot->device); + dbg("%s: adding bus:device(%x:%x)\n", + __FUNCTION__, p_slot->bus, p_slot->device); if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) { /* Wait for exclusive access to hardware */ @@ -809,7 +568,6 @@ int pciehp_event_start_thread(void) err ("Can't start up our event thread\n"); return -1; } - dbg("Our event thread pid = %d\n", pid); return 0; } @@ -817,9 +575,7 @@ int pciehp_event_start_thread(void) void pciehp_event_stop_thread(void) { event_finished = 1; - dbg("event_thread finish command given\n"); up(&event_semaphore); - dbg("wait for event_thread to exit\n"); down(&event_exit); } @@ -851,7 +607,6 @@ static void interrupt_event_handler(struct controller *ctrl) { int loop = 0; int change = 1; - struct pci_func *func; u8 hp_slot; u8 getstatus; struct slot *p_slot; @@ -859,16 +614,12 @@ static void interrupt_event_handler(struct controller *ctrl) while (change) { change = 0; - for (loop = 0; loop < 10; loop++) { + for (loop = 0; loop < MAX_EVENTS; loop++) { if (ctrl->event_queue[loop].event_type != 0) { hp_slot = ctrl->event_queue[loop].hp_slot; - func = pciehp_slot_find(ctrl->slot_bus, (hp_slot + ctrl->slot_device_offset), 0); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - dbg("hp_slot %d, func %p, p_slot %p\n", hp_slot, func, p_slot); - if (ctrl->event_queue[loop].event_type == INT_BUTTON_CANCEL) { dbg("button cancel\n"); del_timer(&p_slot->task_event); @@ -960,7 +711,6 @@ static void interrupt_event_handler(struct controller *ctrl) p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread; p_slot->task_event.data = (unsigned long) p_slot; - dbg("add_timer p_slot = %p\n", (void *) p_slot); add_timer(&p_slot->task_event); } } @@ -1015,13 +765,6 @@ int pciehp_enable_slot(struct slot *p_slot) { u8 getstatus = 0; int rc; - struct pci_func *func; - - func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); - if (!func) { - dbg("%s: Error! slot NULL\n", __FUNCTION__); - return 1; - } /* Check to see if (latch closed, card present, power off) */ down(&p_slot->ctrl->crit_sect); @@ -1051,45 +794,11 @@ int pciehp_enable_slot(struct slot *p_slot) } up(&p_slot->ctrl->crit_sect); - slot_remove(func); - - func = pciehp_slot_create(p_slot->bus); - if (func == NULL) - return 1; - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; - - /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; - rc = board_added(func, p_slot->ctrl); + rc = board_added(p_slot); if (rc) { - if (is_bridge(func)) - bridge_slot_remove(func); - else - slot_remove(func); - - /* Setup slot structure with entry for empty slot */ - func = pciehp_slot_create(p_slot->bus); - if (func == NULL) - return 1; /* Out of memory */ - - func->bus = p_slot->bus; - func->device = p_slot->device; - func->function = 0; - func->configured = 0; - func->is_a_board = 1; - - /* We have to save the presence info for these slots */ - p_slot->hpc_ops->get_adapter_status(p_slot, &(func->presence_save)); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - func->switch_save = !getstatus? 0x10:0; } if (p_slot) @@ -1101,14 +810,8 @@ int pciehp_enable_slot(struct slot *p_slot) int pciehp_disable_slot(struct slot *p_slot) { - u8 class_code, header_type, BCR; - u8 index = 0; u8 getstatus = 0; - u32 rc = 0; int ret = 0; - unsigned int devfn; - struct pci_bus *pci_bus = p_slot->ctrl->pci_dev->subordinate; - struct pci_func *func; if (!p_slot->ctrl) return 1; @@ -1145,54 +848,8 @@ int pciehp_disable_slot(struct slot *p_slot) up(&p_slot->ctrl->crit_sect); - func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); - - /* Make sure there are no video controllers here - * for all func of p_slot - */ - while (func && !rc) { - pci_bus->number = func->bus; - devfn = PCI_DEVFN(func->device, func->function); - - /* Check the Class Code */ - rc = pci_bus_read_config_byte (pci_bus, devfn, 0x0B, &class_code); - if (rc) - return rc; - - if (class_code == PCI_BASE_CLASS_DISPLAY) { - /* Display/Video adapter (not supported) */ - rc = REMOVE_NOT_SUPPORTED; - } else { - /* See if it's a bridge */ - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_HEADER_TYPE, &header_type); - if (rc) - return rc; - - /* If it's a bridge, check the VGA Enable bit */ - if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) { - rc = pci_bus_read_config_byte (pci_bus, devfn, PCI_BRIDGE_CONTROL, &BCR); - if (rc) - return rc; - - /* If the VGA Enable bit is set, remove isn't supported */ - if (BCR & PCI_BRIDGE_CTL_VGA) { - rc = REMOVE_NOT_SUPPORTED; - } - } - } - - func = pciehp_slot_find(p_slot->bus, p_slot->device, index++); - } - - func = pciehp_slot_find(p_slot->bus, p_slot->device, 0); - if ((func != NULL) && !rc) { - rc = remove_board(func, p_slot->ctrl); - } else if (!rc) - rc = 1; - - if (p_slot) - update_slot_info(p_slot); - - return rc; + ret = remove_board(p_slot); + update_slot_info(p_slot); + return ret; }