X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fpci%2Fpci.c;h=e74d75843047c24cf299cf53daad16635355d640;hb=ad8f76be48d817b48222411ae16a7dfe257bdb24;hp=992db89adce7b2ea6b03902f012b664d1ff7f0fe;hpb=3874b98c655b9490bea1cf9c7697d5dc5338376f;p=powerpc.git

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 992db89adc..e74d758430 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -15,6 +15,7 @@
 #include <linux/pci.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
+#include <linux/string.h>
 #include <asm/dma.h>	/* isa_dma_bridge_buggy */
 #include "pci.h"
 
@@ -252,6 +253,8 @@ pci_restore_bars(struct pci_dev *dev)
 		pci_update_resource(dev, &dev->resource[i], i);
 }
 
+int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
+
 /**
  * pci_set_power_state - Set the power state of a PCI device
  * @dev: PCI device to be suspended
@@ -266,7 +269,6 @@ pci_restore_bars(struct pci_dev *dev)
  * -EIO if device does not support PCI PM.
  * 0 if we can successfully change the power state.
  */
-int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t t);
 int
 pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 {
@@ -309,17 +311,25 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
 
 	pci_read_config_word(dev, pm + PCI_PM_CTRL, &pmcsr);
 
-	/* If we're in D3, force entire word to 0.
+	/* If we're (effectively) in D3, force entire word to 0.
 	 * This doesn't affect PME_Status, disables PME_En, and
 	 * sets PowerState to 0.
 	 */
-	if (dev->current_state >= PCI_D3hot) {
-		if (!(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
-			need_restore = 1;
-		pmcsr = 0;
-	} else {
+	switch (dev->current_state) {
+	case PCI_D0:
+	case PCI_D1:
+	case PCI_D2:
 		pmcsr &= ~PCI_PM_CTRL_STATE_MASK;
 		pmcsr |= state;
+		break;
+	case PCI_UNKNOWN: /* Boot-up */
+		if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot
+		 && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET))
+			need_restore = 1;
+		/* Fall-through: force to D0 */
+	default:
+		pmcsr = 0;
+		break;
 	}
 
 	/* enter specified state */
@@ -800,8 +810,8 @@ pci_clear_mwi(struct pci_dev *dev)
 
 /**
  * pci_intx - enables/disables PCI INTx for device dev
- * @dev: the PCI device to operate on
- * @enable: boolean
+ * @pdev: the PCI device to operate on
+ * @enable: boolean: whether to enable or disable PCI INTx
  *
  * Enables/disables PCI INTx for device dev
  */