X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fpci%2Fprobe.c;h=0e0401dd02cb182ea2364cff7cdfdf4adc4a1d2d;hb=725522b5453dd680412f2b6463a988e4fd148757;hp=a3b0a5eb5054fefcc0e76e72b838fac1146fd310;hpb=cdb8355add9b1d87ecfcb58b12879897dc1e3e36;p=powerpc.git

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index a3b0a5eb50..0e0401dd02 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -639,6 +639,8 @@ static void pci_read_irq(struct pci_dev *dev)
 	dev->irq = irq;
 }
 
+#define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+
 /**
  * pci_setup_device - fill in class and map information of a device
  * @dev: the device structure to fill
@@ -679,6 +681,33 @@ static int pci_setup_device(struct pci_dev * dev)
 		pci_read_bases(dev, 6, PCI_ROM_ADDRESS);
 		pci_read_config_word(dev, PCI_SUBSYSTEM_VENDOR_ID, &dev->subsystem_vendor);
 		pci_read_config_word(dev, PCI_SUBSYSTEM_ID, &dev->subsystem_device);
+
+		/*
+		 *	Do the ugly legacy mode stuff here rather than broken chip
+		 *	quirk code. Legacy mode ATA controllers have fixed
+		 *	addresses. These are not always echoed in BAR0-3, and
+		 *	BAR0-3 in a few cases contain junk!
+		 */
+		if (class == PCI_CLASS_STORAGE_IDE) {
+			u8 progif;
+			pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
+			if ((progif & 1) == 0) {
+				dev->resource[0].start = 0x1F0;
+				dev->resource[0].end = 0x1F7;
+				dev->resource[0].flags = LEGACY_IO_RESOURCE;
+				dev->resource[1].start = 0x3F6;
+				dev->resource[1].end = 0x3F6;
+				dev->resource[1].flags = LEGACY_IO_RESOURCE;
+			}
+			if ((progif & 4) == 0) {
+				dev->resource[2].start = 0x170;
+				dev->resource[2].end = 0x177;
+				dev->resource[2].flags = LEGACY_IO_RESOURCE;
+				dev->resource[3].start = 0x376;
+				dev->resource[3].end = 0x376;
+				dev->resource[3].flags = LEGACY_IO_RESOURCE;
+			}
+		}
 		break;
 
 	case PCI_HEADER_TYPE_BRIDGE:		    /* bridge header */
@@ -846,6 +875,7 @@ void __devinit pci_device_add(struct pci_dev *dev, struct pci_bus *bus)
 	dev->dev.release = pci_release_dev;
 	pci_dev_get(dev);
 
+	set_dev_node(&dev->dev, pcibus_to_node(bus));
 	dev->dev.dma_mask = &dev->dma_mask;
 	dev->dev.coherent_dma_mask = 0xffffffffull;
 
@@ -1067,3 +1097,95 @@ EXPORT_SYMBOL(pci_scan_bridge);
 EXPORT_SYMBOL(pci_scan_single_device);
 EXPORT_SYMBOL_GPL(pci_scan_child_bus);
 #endif
+
+static int __init pci_sort_bf_cmp(const struct pci_dev *a, const struct pci_dev *b)
+{
+	if      (pci_domain_nr(a->bus) < pci_domain_nr(b->bus)) return -1;
+	else if (pci_domain_nr(a->bus) > pci_domain_nr(b->bus)) return  1;
+
+	if      (a->bus->number < b->bus->number) return -1;
+	else if (a->bus->number > b->bus->number) return  1;
+
+	if      (a->devfn < b->devfn) return -1;
+	else if (a->devfn > b->devfn) return  1;
+
+	return 0;
+}
+
+/*
+ * Yes, this forcably breaks the klist abstraction temporarily.  It
+ * just wants to sort the klist, not change reference counts and
+ * take/drop locks rapidly in the process.  It does all this while
+ * holding the lock for the list, so objects can't otherwise be
+ * added/removed while we're swizzling.
+ */
+static void __init pci_insertion_sort_klist(struct pci_dev *a, struct list_head *list)
+{
+	struct list_head *pos;
+	struct klist_node *n;
+	struct device *dev;
+	struct pci_dev *b;
+
+	list_for_each(pos, list) {
+		n = container_of(pos, struct klist_node, n_node);
+		dev = container_of(n, struct device, knode_bus);
+		b = to_pci_dev(dev);
+		if (pci_sort_bf_cmp(a, b) <= 0) {
+			list_move_tail(&a->dev.knode_bus.n_node, &b->dev.knode_bus.n_node);
+			return;
+		}
+	}
+	list_move_tail(&a->dev.knode_bus.n_node, list);
+}
+
+static void __init pci_sort_breadthfirst_klist(void)
+{
+	LIST_HEAD(sorted_devices);
+	struct list_head *pos, *tmp;
+	struct klist_node *n;
+	struct device *dev;
+	struct pci_dev *pdev;
+
+	spin_lock(&pci_bus_type.klist_devices.k_lock);
+	list_for_each_safe(pos, tmp, &pci_bus_type.klist_devices.k_list) {
+		n = container_of(pos, struct klist_node, n_node);
+		dev = container_of(n, struct device, knode_bus);
+		pdev = to_pci_dev(dev);
+		pci_insertion_sort_klist(pdev, &sorted_devices);
+	}
+	list_splice(&sorted_devices, &pci_bus_type.klist_devices.k_list);
+	spin_unlock(&pci_bus_type.klist_devices.k_lock);
+}
+
+static void __init pci_insertion_sort_devices(struct pci_dev *a, struct list_head *list)
+{
+	struct pci_dev *b;
+
+	list_for_each_entry(b, list, global_list) {
+		if (pci_sort_bf_cmp(a, b) <= 0) {
+			list_move_tail(&a->global_list, &b->global_list);
+			return;
+		}
+	}
+	list_move_tail(&a->global_list, list);
+}
+
+static void __init pci_sort_breadthfirst_devices(void)
+{
+	LIST_HEAD(sorted_devices);
+	struct pci_dev *dev, *tmp;
+
+	down_write(&pci_bus_sem);
+	list_for_each_entry_safe(dev, tmp, &pci_devices, global_list) {
+		pci_insertion_sort_devices(dev, &sorted_devices);
+	}
+	list_splice(&sorted_devices, &pci_devices);
+	up_write(&pci_bus_sem);
+}
+
+void __init pci_sort_breadthfirst(void)
+{
+	pci_sort_breadthfirst_devices();
+	pci_sort_breadthfirst_klist();
+}
+