X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fscsi%2Fsata_nv.c;h=f77bf183dfab81de3fbd3aa4f61140fa95b47fb7;hb=02cbd926e9acdc03574d26803050cd2664f59ada;hp=caffadc2e0aed630b6ceeac6d3f6802c85cae33e;hpb=e952f31bce6e9f64db01f607abc46529ba57ac9e;p=powerpc.git diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index caffadc2e0..f77bf183df 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -29,34 +29,6 @@ * NV-specific details such as register offsets, SATA phy location, * hotplug info, etc. * - * 0.10 - * - Fixed spurious interrupts issue seen with the Maxtor 6H500F0 500GB - * drive. Also made the check_hotplug() callbacks return whether there - * was a hotplug interrupt or not. This was not the source of the - * spurious interrupts, but is the right thing to do anyway. - * - * 0.09 - * - Fixed bug introduced by 0.08's MCP51 and MCP55 support. - * - * 0.08 - * - Added support for MCP51 and MCP55. - * - * 0.07 - * - Added support for RAID class code. - * - * 0.06 - * - Added generic SATA support by using a pci_device_id that filters on - * the IDE storage class code. - * - * 0.03 - * - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using - * mmio_base, which is only set for the CK804/MCP04 case. - * - * 0.02 - * - Added support for CK804 SATA controller. - * - * 0.01 - * - Initial revision. */ #include @@ -74,53 +46,55 @@ #define DRV_NAME "sata_nv" #define DRV_VERSION "0.8" -#define NV_PORTS 2 -#define NV_PIO_MASK 0x1f -#define NV_MWDMA_MASK 0x07 -#define NV_UDMA_MASK 0x7f -#define NV_PORT0_SCR_REG_OFFSET 0x00 -#define NV_PORT1_SCR_REG_OFFSET 0x40 - -#define NV_INT_STATUS 0x10 -#define NV_INT_STATUS_CK804 0x440 -#define NV_INT_STATUS_PDEV_INT 0x01 -#define NV_INT_STATUS_PDEV_PM 0x02 -#define NV_INT_STATUS_PDEV_ADDED 0x04 -#define NV_INT_STATUS_PDEV_REMOVED 0x08 -#define NV_INT_STATUS_SDEV_INT 0x10 -#define NV_INT_STATUS_SDEV_PM 0x20 -#define NV_INT_STATUS_SDEV_ADDED 0x40 -#define NV_INT_STATUS_SDEV_REMOVED 0x80 -#define NV_INT_STATUS_PDEV_HOTPLUG (NV_INT_STATUS_PDEV_ADDED | \ - NV_INT_STATUS_PDEV_REMOVED) -#define NV_INT_STATUS_SDEV_HOTPLUG (NV_INT_STATUS_SDEV_ADDED | \ - NV_INT_STATUS_SDEV_REMOVED) -#define NV_INT_STATUS_HOTPLUG (NV_INT_STATUS_PDEV_HOTPLUG | \ - NV_INT_STATUS_SDEV_HOTPLUG) - -#define NV_INT_ENABLE 0x11 -#define NV_INT_ENABLE_CK804 0x441 -#define NV_INT_ENABLE_PDEV_MASK 0x01 -#define NV_INT_ENABLE_PDEV_PM 0x02 -#define NV_INT_ENABLE_PDEV_ADDED 0x04 -#define NV_INT_ENABLE_PDEV_REMOVED 0x08 -#define NV_INT_ENABLE_SDEV_MASK 0x10 -#define NV_INT_ENABLE_SDEV_PM 0x20 -#define NV_INT_ENABLE_SDEV_ADDED 0x40 -#define NV_INT_ENABLE_SDEV_REMOVED 0x80 -#define NV_INT_ENABLE_PDEV_HOTPLUG (NV_INT_ENABLE_PDEV_ADDED | \ - NV_INT_ENABLE_PDEV_REMOVED) -#define NV_INT_ENABLE_SDEV_HOTPLUG (NV_INT_ENABLE_SDEV_ADDED | \ - NV_INT_ENABLE_SDEV_REMOVED) -#define NV_INT_ENABLE_HOTPLUG (NV_INT_ENABLE_PDEV_HOTPLUG | \ - NV_INT_ENABLE_SDEV_HOTPLUG) - -#define NV_INT_CONFIG 0x12 -#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI - -// For PCI config register 20 -#define NV_MCP_SATA_CFG_20 0x50 -#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04 +enum { + NV_PORTS = 2, + NV_PIO_MASK = 0x1f, + NV_MWDMA_MASK = 0x07, + NV_UDMA_MASK = 0x7f, + NV_PORT0_SCR_REG_OFFSET = 0x00, + NV_PORT1_SCR_REG_OFFSET = 0x40, + + NV_INT_STATUS = 0x10, + NV_INT_STATUS_CK804 = 0x440, + NV_INT_STATUS_PDEV_INT = 0x01, + NV_INT_STATUS_PDEV_PM = 0x02, + NV_INT_STATUS_PDEV_ADDED = 0x04, + NV_INT_STATUS_PDEV_REMOVED = 0x08, + NV_INT_STATUS_SDEV_INT = 0x10, + NV_INT_STATUS_SDEV_PM = 0x20, + NV_INT_STATUS_SDEV_ADDED = 0x40, + NV_INT_STATUS_SDEV_REMOVED = 0x80, + NV_INT_STATUS_PDEV_HOTPLUG = (NV_INT_STATUS_PDEV_ADDED | + NV_INT_STATUS_PDEV_REMOVED), + NV_INT_STATUS_SDEV_HOTPLUG = (NV_INT_STATUS_SDEV_ADDED | + NV_INT_STATUS_SDEV_REMOVED), + NV_INT_STATUS_HOTPLUG = (NV_INT_STATUS_PDEV_HOTPLUG | + NV_INT_STATUS_SDEV_HOTPLUG), + + NV_INT_ENABLE = 0x11, + NV_INT_ENABLE_CK804 = 0x441, + NV_INT_ENABLE_PDEV_MASK = 0x01, + NV_INT_ENABLE_PDEV_PM = 0x02, + NV_INT_ENABLE_PDEV_ADDED = 0x04, + NV_INT_ENABLE_PDEV_REMOVED = 0x08, + NV_INT_ENABLE_SDEV_MASK = 0x10, + NV_INT_ENABLE_SDEV_PM = 0x20, + NV_INT_ENABLE_SDEV_ADDED = 0x40, + NV_INT_ENABLE_SDEV_REMOVED = 0x80, + NV_INT_ENABLE_PDEV_HOTPLUG = (NV_INT_ENABLE_PDEV_ADDED | + NV_INT_ENABLE_PDEV_REMOVED), + NV_INT_ENABLE_SDEV_HOTPLUG = (NV_INT_ENABLE_SDEV_ADDED | + NV_INT_ENABLE_SDEV_REMOVED), + NV_INT_ENABLE_HOTPLUG = (NV_INT_ENABLE_PDEV_HOTPLUG | + NV_INT_ENABLE_SDEV_HOTPLUG), + + NV_INT_CONFIG = 0x12, + NV_INT_CONFIG_METHD = 0x01, // 0 = INT, 1 = SMI + + // For PCI config register 20 + NV_MCP_SATA_CFG_20 = 0x50, + NV_MCP_SATA_CFG_20_SATA_SPACE_EN = 0x04, +}; static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); static irqreturn_t nv_interrupt (int irq, void *dev_instance, @@ -175,8 +149,6 @@ static const struct pci_device_id nv_pci_tbl[] = { { 0, } /* terminate list */ }; -#define NV_HOST_FLAGS_SCR_MMIO 0x00000001 - struct nv_host_desc { enum nv_host_type host_type; @@ -229,7 +201,6 @@ static struct scsi_host_template nv_sht = { .name = DRV_NAME, .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, - .eh_timed_out = ata_scsi_timed_out, .eh_strategy_handler = ata_scsi_error, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, @@ -333,36 +304,23 @@ static irqreturn_t nv_interrupt (int irq, void *dev_instance, static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg) { - struct ata_host_set *host_set = ap->host_set; - struct nv_host *host = host_set->private_data; - if (sc_reg > SCR_CONTROL) return 0xffffffffU; - if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - return readl((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); - else - return inl(ap->ioaddr.scr_addr + (sc_reg * 4)); + return ioread32((void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); } static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val) { - struct ata_host_set *host_set = ap->host_set; - struct nv_host *host = host_set->private_data; - if (sc_reg > SCR_CONTROL) return; - if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - writel(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); - else - outl(val, ap->ioaddr.scr_addr + (sc_reg * 4)); + iowrite32(val, (void __iomem *)ap->ioaddr.scr_addr + (sc_reg * 4)); } static void nv_host_stop (struct ata_host_set *host_set) { struct nv_host *host = host_set->private_data; - struct pci_dev *pdev = to_pci_dev(host_set->dev); // Disable hotplug event interrupts. if (host->host_desc->disable_hotplug) @@ -370,8 +328,7 @@ static void nv_host_stop (struct ata_host_set *host_set) kfree(host); - if (host_set->mmio_base) - pci_iounmap(pdev, host_set->mmio_base); + ata_pci_host_stop(host_set); } static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) @@ -383,6 +340,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) int pci_dev_busy = 0; int rc; u32 bar; + unsigned long base; // Make sure this is a SATA controller by counting the number of bars // (NVIDIA SATA controllers will always have six bars). Otherwise, @@ -427,31 +385,16 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->private_data = host; - if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM) - host->host_flags |= NV_HOST_FLAGS_SCR_MMIO; - - if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) { - unsigned long base; - - probe_ent->mmio_base = pci_iomap(pdev, 5, 0); - if (probe_ent->mmio_base == NULL) { - rc = -EIO; - goto err_out_free_host; - } - - base = (unsigned long)probe_ent->mmio_base; + probe_ent->mmio_base = pci_iomap(pdev, 5, 0); + if (!probe_ent->mmio_base) { + rc = -EIO; + goto err_out_free_host; + } - probe_ent->port[0].scr_addr = - base + NV_PORT0_SCR_REG_OFFSET; - probe_ent->port[1].scr_addr = - base + NV_PORT1_SCR_REG_OFFSET; - } else { + base = (unsigned long)probe_ent->mmio_base; - probe_ent->port[0].scr_addr = - pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET; - probe_ent->port[1].scr_addr = - pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET; - } + probe_ent->port[0].scr_addr = base + NV_PORT0_SCR_REG_OFFSET; + probe_ent->port[1].scr_addr = base + NV_PORT1_SCR_REG_OFFSET; pci_set_master(pdev); @@ -468,8 +411,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) return 0; err_out_iounmap: - if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) - pci_iounmap(pdev, probe_ent->mmio_base); + pci_iounmap(pdev, probe_ent->mmio_base); err_out_free_host: kfree(host); err_out_free_ent: