X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fserial%2FKconfig;h=ad9f321968e1d24061272ece20db34b0b12d3084;hb=55b61fec22caa3e7872caea6c4100fc75cb8f49b;hp=0b36dd5cdac2c4741b2919247015b8640f54e9c7;hpb=c4366889dda8110247be59ca41fddb82951a8c26;p=powerpc.git

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 0b36dd5cda..ad9f321968 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -262,7 +262,8 @@ config SERIAL_AMBA_PL010
 	select SERIAL_CORE
 	help
 	  This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-	  an Integrator/AP or Integrator/PP2 platform, say Y or M here.
+	  an Integrator/AP or Integrator/PP2 platform, or if you have a
+	  Cirrus Logic EP93xx CPU, say Y or M here.
 
 	  If unsure, say N.
 
@@ -663,7 +664,7 @@ config V850E_UART
 
 config V850E_UARTB
         bool
-	depends V850E_UART && V850E_ME2
+	depends on V850E_UART && V850E_ME2
 	default y
 
 config V850E_UART_CONSOLE
@@ -686,6 +687,22 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_PNX8XXX
+	bool "Enable PNX8XXX SoCs' UART Support"
+	depends on MIPS && SOC_PNX8550
+	select SERIAL_CORE
+	help
+	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
+	  and you want to use serial ports, say Y.  Otherwise, say N.
+
+config SERIAL_PNX8XXX_CONSOLE
+	bool "Enable PNX8XX0 serial console"
+	depends on SERIAL_PNX8XXX
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
+	  and you want to use serial console, say Y. Otherwise, say N.
+
 config SERIAL_CORE
 	tristate
 
@@ -909,13 +926,18 @@ config SERIAL_M32R_PLDSIO
 
 config SERIAL_TXX9
 	bool "TMPTX39XX/49XX SIO support"
-	depends HAS_TXX9_SERIAL
+	depends on HAS_TXX9_SERIAL
 	select SERIAL_CORE
 	default y
 
 config HAS_TXX9_SERIAL
 	bool
 
+config SERIAL_TXX9_NR_UARTS
+	int "Maximum number of TMPTX39XX/49XX SIO ports"
+	depends on SERIAL_TXX9
+	default "6"
+
 config SERIAL_TXX9_CONSOLE
 	bool "TMPTX39XX/49XX SIO Console support"
 	depends on SERIAL_TXX9=y
@@ -994,4 +1016,14 @@ config SERIAL_NETX_CONSOLE
 	  If you have enabled the serial port on the Motorola IMX
 	  CPU you can make it the console by answering Y to this option.
 
+config SERIAL_OF_PLATFORM
+	tristate "Serial port on Open Firmware platform bus"
+	depends on PPC_OF
+	depends on SERIAL_8250
+	help
+	  If you have a PowerPC based system that has serial ports
+	  on a platform specific bus, you should enable this option.
+	  Currently, only 8250 compatible ports are supported, but
+	  others can easily be added.
+
 endmenu