X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fserial%2Fmux.c;h=64c0e89124c9983bc4a29e844e2842e9cac18fb8;hb=b0c51b7d650d5109c8e71e19d5e7ce9b71af7dff;hp=660bae5ba179bf87a5197905265f726f00b0165d;hpb=07b188ab773e183871e57b33ae37bf635c9f12ba;p=powerpc.git

diff --git a/drivers/serial/mux.c b/drivers/serial/mux.c
index 660bae5ba1..64c0e89124 100644
--- a/drivers/serial/mux.c
+++ b/drivers/serial/mux.c
@@ -51,7 +51,7 @@
 #define MUX_BREAK(status) ((status & 0xF000) == 0x2000)
 
 #define MUX_NR 256
-static unsigned int port_cnt = 0;
+static unsigned int port_cnt __read_mostly;
 static struct uart_port mux_ports[MUX_NR];
 
 static struct uart_driver mux_driver = {
@@ -65,8 +65,8 @@ static struct uart_driver mux_driver = {
 
 static struct timer_list mux_timer;
 
-#define UART_PUT_CHAR(p, c) __raw_writel((c), (unsigned long)(p)->membase + IO_DATA_REG_OFFSET)
-#define UART_GET_FIFO_CNT(p) __raw_readl((unsigned long)(p)->membase + IO_DCOUNT_REG_OFFSET)
+#define UART_PUT_CHAR(p, c) __raw_writel((c), (p)->membase + IO_DATA_REG_OFFSET)
+#define UART_GET_FIFO_CNT(p) __raw_readl((p)->membase + IO_DCOUNT_REG_OFFSET)
 #define GET_MUX_PORTS(iodc_data) ((((iodc_data)[4] & 0xf0) >> 4) * 8) + 8
 
 /**
@@ -79,10 +79,7 @@ static struct timer_list mux_timer;
  */
 static unsigned int mux_tx_empty(struct uart_port *port)
 {
-	unsigned int cnt = __raw_readl((unsigned long)port->membase 
-				+ IO_DCOUNT_REG_OFFSET);
-
-	return cnt ? 0 : TIOCSER_TEMT;
+	return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
 } 
 
 /**
@@ -218,8 +215,7 @@ static void mux_read(struct uart_port *port)
 	__u32 start_count = port->icount.rx;
 
 	while(1) {
-		data = __raw_readl((unsigned long)port->membase
-						+ IO_DATA_REG_OFFSET);
+		data = __raw_readl(port->membase + IO_DATA_REG_OFFSET);
 
 		if (MUX_STATUS(data))
 			continue;
@@ -227,11 +223,6 @@ static void mux_read(struct uart_port *port)
 		if (MUX_EOFIFO(data))
 			break;
 
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE)
-			continue;
-
-		*tty->flip.char_buf_ptr = data & 0xffu;
-		*tty->flip.flag_buf_ptr = TTY_NORMAL;
 		port->icount.rx++;
 
 		if (MUX_BREAK(data)) {
@@ -243,9 +234,7 @@ static void mux_read(struct uart_port *port)
 		if (uart_handle_sysrq_char(port, data & 0xffu, NULL))
 			continue;
 
-		tty->flip.flag_buf_ptr++;
-		tty->flip.char_buf_ptr++;
-		tty->flip.count++;
+		tty_insert_flip_char(tty, data & 0xFF, TTY_NORMAL);
 	}
 	
 	if (start_count != port->icount.rx) {
@@ -472,8 +461,8 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->iobase	= 0;
 		port->mapbase	= dev->hpa.start + MUX_OFFSET +
 						(i * MUX_LINE_OFFSET);
-		port->membase	= ioremap(port->mapbase, MUX_LINE_OFFSET);
-		port->iotype	= SERIAL_IO_MEM;
+		port->membase	= ioremap_nocache(port->mapbase, MUX_LINE_OFFSET);
+		port->iotype	= UPIO_MEM;
 		port->type	= PORT_MUX;
 		port->irq	= NO_IRQ;
 		port->uartclk	= 0;
@@ -481,6 +470,13 @@ static int __init mux_probe(struct parisc_device *dev)
 		port->ops	= &mux_pops;
 		port->flags	= UPF_BOOT_AUTOCONF;
 		port->line	= port_cnt;
+
+		/* The port->timeout needs to match what is present in
+		 * uart_wait_until_sent in serial_core.c.  Otherwise
+		 * the time spent in msleep_interruptable will be very
+		 * long, causing the appearance of a console hang.
+		 */
+		port->timeout   = HZ / 50;
 		spin_lock_init(&port->lock);
 		status = uart_add_one_port(&mux_driver, port);
 		BUG_ON(status);