X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fserial%2Fpmac_zilog.c;h=794bd0f50d7374533489a888ae19cf2763704fe4;hb=144b2a91468bdc0d4fa64b220c152fb58b8ffe05;hp=752ef07516b9d7d6cfa6ec2842334b0a790ab20a;hpb=463e7c7cf9aaf95dd05e97e1a47854fdf5454cdc;p=powerpc.git

diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 752ef07516..794bd0f50d 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -88,6 +88,16 @@ MODULE_LICENSE("GPL");
 
 #define PWRDBG(fmt, arg...)	printk(KERN_DEBUG fmt , ## arg)
 
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+#define PMACZILOG_MAJOR		TTY_MAJOR
+#define PMACZILOG_MINOR		64
+#define PMACZILOG_NAME		"ttyS"
+#else
+#define PMACZILOG_MAJOR		204
+#define PMACZILOG_MINOR		192
+#define PMACZILOG_NAME		"ttyPZ"
+#endif
+
 
 /*
  * For the sake of early serial console, we can do a pre-probe
@@ -99,9 +109,10 @@ static DEFINE_MUTEX(pmz_irq_mutex);
 
 static struct uart_driver pmz_uart_reg = {
 	.owner		=	THIS_MODULE,
-	.driver_name	=	"ttyS",
-	.dev_name	=	"ttyS",
-	.major		=	TTY_MAJOR,
+	.driver_name	=	PMACZILOG_NAME,
+	.dev_name	=	PMACZILOG_NAME,
+	.major		=	PMACZILOG_MAJOR,
+	.minor		=	PMACZILOG_MINOR,
 };
 
 
@@ -1450,14 +1461,14 @@ no_dma:
 	/*
 	 * Detect port type
 	 */
-	if (device_is_compatible(np, "cobalt"))
+	if (of_device_is_compatible(np, "cobalt"))
 		uap->flags |= PMACZILOG_FLAG_IS_INTMODEM;
-	conn = get_property(np, "AAPL,connector", &len);
+	conn = of_get_property(np, "AAPL,connector", &len);
 	if (conn && (strcmp(conn, "infrared") == 0))
 		uap->flags |= PMACZILOG_FLAG_IS_IRDA;
 	uap->port_type = PMAC_SCC_ASYNC;
 	/* 1999 Powerbook G3 has slot-names property instead */
-	slots = get_property(np, "slot-names", &len);
+	slots = of_get_property(np, "slot-names", &len);
 	if (slots && slots->count > 0) {
 		if (strcmp(slots->name, "IrDA") == 0)
 			uap->flags |= PMACZILOG_FLAG_IS_IRDA;
@@ -1467,10 +1478,11 @@ no_dma:
 	if (ZS_IS_IRDA(uap))
 		uap->port_type = PMAC_SCC_IRDA;
 	if (ZS_IS_INTMODEM(uap)) {
-		struct device_node* i2c_modem = find_devices("i2c-modem");
+		struct device_node* i2c_modem =
+			of_find_node_by_name(NULL, "i2c-modem");
 		if (i2c_modem) {
 			const char* mid =
-				get_property(i2c_modem, "modem-id", NULL);
+				of_get_property(i2c_modem, "modem-id", NULL);
 			if (mid) switch(*mid) {
 			case 0x04 :
 			case 0x05 :
@@ -1482,6 +1494,7 @@ no_dma:
 			}
 			printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
 				mid ? (*mid) : 0);
+			of_node_put(i2c_modem);
 		} else {
 			printk(KERN_INFO "pmac_zilog: serial modem detected\n");
 		}
@@ -1585,7 +1598,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
 	if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
 		return 0;
 
-	pmz_debug("suspend, switching to state %d\n", pm_state);
+	pmz_debug("suspend, switching to state %d\n", pm_state.event);
 
 	state = pmz_uart_reg.state + uap->port.line;
 
@@ -1776,7 +1789,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
 static int __init pmz_console_setup(struct console *co, char *options);
 
 static struct console pmz_console = {
-	.name	=	"ttyS",
+	.name	=	PMACZILOG_NAME,
 	.write	=	pmz_console_write,
 	.device	=	uart_console_device,
 	.setup	=	pmz_console_setup,
@@ -1800,7 +1813,6 @@ static int __init pmz_register(void)
 	
 	pmz_uart_reg.nr = pmz_ports_count;
 	pmz_uart_reg.cons = PMACZILOG_CONSOLE;
-	pmz_uart_reg.minor = 64;
 
 	/*
 	 * Register this driver with the serial core