X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fserial%2Fs3c2410.c;h=7410e093a6b9ffa733a4629c947c4d7324ecdcc7;hb=c5111f504d2a9b0d258d7c4752b4093523315989;hp=47681c4654e4d110d1cd76ea4d37752881de8b0c;hpb=3ae5eaec1d2d9c0cf53745352e7d4b152810ba24;p=powerpc.git

diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 47681c4654..7410e093a6 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -72,12 +72,12 @@
 #include <linux/serial_core.h>
 #include <linux/serial.h>
 #include <linux/delay.h>
+#include <linux/clk.h>
 
 #include <asm/io.h>
 #include <asm/irq.h>
 
 #include <asm/hardware.h>
-#include <asm/hardware/clock.h>
 
 #include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
@@ -161,7 +161,11 @@ s3c24xx_serial_dbg(const char *fmt, ...)
 
 /* we can support 3 uarts, but not always use them */
 
+#ifdef CONFIG_CPU_S3C2400
+#define NR_PORTS (2)
+#else
 #define NR_PORTS (3)
+#endif
 
 /* port irq numbers */
 
@@ -323,16 +327,6 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
 		if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
 			break;
 
-		if (tty->flip.count >= TTY_FLIPBUF_SIZE) {
-			if (tty->low_latency)
-				tty_flip_buffer_push(tty);
-
-			/*
-			 * If this failed then we will throw away the
-			 * bytes but must do so to clear interrupts
-			 */
-		}
-
 		uerstat = rd_regl(port, S3C2410_UERSTAT);
 		ch = rd_regb(port, S3C2410_URXH);
 
@@ -782,11 +776,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
 
 		if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
 			clk_disable(ourport->baudclk);
-			clk_unuse(ourport->baudclk);
 			ourport->baudclk  = NULL;
 		}
 
-		clk_use(clk);
 		clk_enable(clk);
 
 		ourport->clksrc = clksrc;
@@ -1072,14 +1064,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
 	dbg("resource %p (%lx..%lx)\n", res, res->start, res->end);
 
 	port->mapbase	= res->start;
-	port->membase	= S3C24XX_VA_UART + (res->start - S3C2410_PA_UART);
+	port->membase	= S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART);
 	port->irq	= platform_get_irq(platdev, 0);
 
 	ourport->clk	= clk_get(&platdev->dev, "uart");
 
-	if (ourport->clk != NULL && !IS_ERR(ourport->clk))
-		clk_use(ourport->clk);
-
 	dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n",
 	    port->mapbase, port->membase, port->irq, port->uartclk);