X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=drivers%2Fusb%2Fhost%2Fehci-pci.c;h=12edc723ec73e41261be2eb1bf25aee451fc1a92;hb=67c2b7d9d224232ee730b9c9444abed824b62e7a;hp=08d0472d4f57f4201e430a625f18702fccdfdc10;hpb=aebb1153ac54ddbbd3d3f0481a193f4bf0ead53b;p=powerpc.git

diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 08d0472d4f..12edc723ec 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -38,7 +38,7 @@ static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 		if ((temp & (3 << 13)) == (1 << 13)) {
 			temp &= 0x1fff;
 			ehci->debug = ehci_to_hcd(ehci)->regs + temp;
-			temp = readl(&ehci->debug->control);
+			temp = ehci_readl(ehci, &ehci->debug->control);
 			ehci_info(ehci, "debug port %d%s\n",
 				HCS_DEBUG_PORT(ehci->hcs_params),
 				(temp & DBGP_ENABLED)
@@ -71,8 +71,24 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	u32			temp;
 	int			retval;
 
+	switch (pdev->vendor) {
+	case PCI_VENDOR_ID_TOSHIBA_2:
+		/* celleb's companion chip */
+		if (pdev->device == 0x01b5) {
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+			ehci->big_endian_mmio = 1;
+#else
+			ehci_warn(ehci,
+				  "unsupported big endian Toshiba quirk\n");
+#endif
+		}
+		break;
+	}
+
 	ehci->caps = hcd->regs;
-	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+	ehci->regs = hcd->regs +
+		HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");
 
@@ -101,7 +117,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 	}
 
 	/* cache this readonly data; minimize chip reads */
-	ehci->hcs_params = readl(&ehci->caps->hcs_params);
+	ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
 
 	retval = ehci_halt(ehci);
 	if (retval)
@@ -235,8 +251,8 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 		rc = -EINVAL;
 		goto bail;
 	}
-	writel (0, &ehci->regs->intr_enable);
-	(void)readl(&ehci->regs->intr_enable);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
 
 	/* make sure snapshot being resumed re-enumerates everything */
 	if (message.event == PM_EVENT_PRETHAW) {
@@ -257,9 +273,7 @@ static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 static int ehci_pci_resume(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
-	unsigned		port;
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
-	int			retval = -EINVAL;
 
 	// maybe restore FLADJ
 
@@ -269,27 +283,19 @@ static int ehci_pci_resume(struct usb_hcd *hcd)
 	/* Mark hardware accessible again as we are out of D3 state by now */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
-	/* If CF is clear, we lost PCI Vaux power and need to restart.  */
-	if (readl(&ehci->regs->configured_flag) != FLAG_CF)
-		goto restart;
-
-	/* If any port is suspended (or owned by the companion),
-	 * we know we can/must resume the HC (and mustn't reset it).
-	 * We just defer that to the root hub code.
+	/* If CF is still set, we maintained PCI Vaux power.
+	 * Just undo the effect of ehci_pci_suspend().
 	 */
-	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
-		u32	status;
-		port--;
-		status = readl(&ehci->regs->port_status [port]);
-		if (!(status & PORT_POWER))
-			continue;
-		if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
-			usb_hcd_resume_root_hub(hcd);
-			return 0;
-		}
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
+		int	mask = INTR_MASK;
+
+		if (!device_may_wakeup(&hcd->self.root_hub->dev))
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
 	}
 
-restart:
 	ehci_dbg(ehci, "lost power, restarting\n");
 	usb_root_hub_lost_power(hcd->self.root_hub);
 
@@ -303,17 +309,19 @@ restart:
 	/* emptying the schedule aborts any urbs */
 	spin_lock_irq(&ehci->lock);
 	if (ehci->reclaim)
-		end_unlink_async (ehci, NULL);
-	ehci_work(ehci, NULL);
+		ehci->reclaim_ready = 1;
+	ehci_work(ehci);
 	spin_unlock_irq(&ehci->lock);
 
-	/* restart; khubd will disconnect devices */
-	retval = ehci_run(hcd);
-
 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);
 
-	return retval;
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	hcd->state = HC_STATE_SUSPENDED;
+	return 0;
 }
 #endif