X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=firmware%2Fapps%2Favr%2Favr.c;h=4b346c030ca9f0ba8c52b9f0b93c4b2b72c3fc15;hb=36daa0f842ad9458f4390204dd10f4fbc5290ad4;hp=fdef1aa76ee52b3cca5535131f21ce618dd9fdf8;hpb=25e355b9e50cee54081024c581501757e7c33b5d;p=goodfet

diff --git a/firmware/apps/avr/avr.c b/firmware/apps/avr/avr.c
index fdef1aa..4b346c0 100644
--- a/firmware/apps/avr/avr.c
+++ b/firmware/apps/avr/avr.c
@@ -11,6 +11,7 @@
 #include <iomacros.h>
 
 #include "avr.h"
+#include "glitch.h"
 
 //! Setup the AVR pins.
 void avrsetup(){
@@ -28,17 +29,17 @@ void avrconnect(){
 
   SETSS;
   CLRCLK;
-  delay(500);
+  //delay(5);
   CLRSS;
-  delay(500);
+  //delay(5);
   
   //Enable programming
   avr_prgen();
 }
 
 //! Read and write an SPI byte with delays.
-unsigned char avrtrans8(unsigned char byte){
-  register unsigned int bit;
+u8 avrtrans8(u8 byte){
+  register u16 bit;
   //This function came from the SPI Wikipedia article.
   //Minor alterations.
   
@@ -67,7 +68,7 @@ u8 avrexchange(u8 a, u8 b, u8 c, u8 d){
   avrtrans8(a);
   avrtrans8(b);
   if(avrtrans8(c)!=b){
-    debugstr("AVR sync error, b not returned as c.");
+    //debugstr("AVR sync error, b not returned as c.");
     //Reconnect here?
   }
   return avrtrans8(d);
@@ -101,6 +102,11 @@ void avr_erase(){
 u8 avr_lockbits(){
   return avrexchange(0x58, 0, 0, 0);
 }
+//! Write lock bits.
+void avr_setlock(u8 bits){
+  avrexchange(0xAC,0xE0,0x00,
+	      bits);
+}
 
 //! Read a byte of EEPROM.
 u8 avr_peekeeprom(u16 adr){
@@ -111,6 +117,14 @@ u8 avr_pokeeeprom(u16 adr, u8 val){
   return avrexchange(0xC0, adr>>8, adr&0xFF, val);
 }
 
+//! Read a byte of Flash
+u8 avr_peekflash(u16 adr){
+  u16 a=adr>>1;
+  if(adr&1) //high byte
+    return avrexchange(0x28,a>>8,a&0xff,0);
+  else      //low byte
+    return avrexchange(0x20,a>>8,a&0xff,0);
+}
 
 
 //! Handles an AVR command.
@@ -118,10 +132,13 @@ void avrhandle(unsigned char app,
 	       unsigned char verb,
 	       unsigned long len){
   unsigned long i;
-  static u8 connected=0;
+  unsigned int at;
+  //static u8 connected=0;
   
+  /*
   if(!avr_isready() && connected)
     debugstr("AVR is not yet ready.");
+  */
   
   switch(verb){
   case READ:
@@ -134,9 +151,10 @@ void avrhandle(unsigned char app,
     avrsetup();
     txdata(app,verb,0);
     break;
-  case START://returns device code
+  case START:
     avrconnect();
-    //no break here
+    txdata(app,verb,0);
+    break;//Used to fall through here.
   case AVR_PEEKSIG:
     for(i=0;i<4;i++)
       cmddata[i]=avr_sig(i);
@@ -150,7 +168,10 @@ void avrhandle(unsigned char app,
     cmddata[0]=avr_lockbits();
     txdata(app,verb,1);
     break;
-
+  case AVR_POKELOCK:
+    avr_setlock(cmddata[0]);
+    txdata(app,verb,0);
+    break;
   case AVR_POKEEEPROM:
     avr_pokeeeprom(cmddataword[0], cmddata[2]);
     //no break here.
@@ -159,6 +180,22 @@ void avrhandle(unsigned char app,
     txdata(app,verb,1);
     break;
   case PEEK:
+    //cmddata[0]=avr_peekflash(cmddataword[0]);
+    //txdata(app,verb,1);
+    at=cmddataword[0];
+    
+    //Fetch large blocks for bulk fetches,
+    //small blocks for individual peeks.
+    if(len>2){
+      len=(cmddataword[1]);//always even.
+    }else{
+      len=1;
+    }
+    txhead(app,verb,len);
+    for(i=0;i<len;i++){
+      serial_tx(avr_peekflash(at++));
+    }
+    break;
   case POKE:
   default:
     debugstr("Verb unimplemented in AVR application.");