X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=firmware%2Flib%2Fmsp430x1612.c;h=386119f48c8e4dd462b9341dfcb301345ef80a3d;hb=878e4212e36ef51e882ef9fc7d936ce8949127d2;hp=e1d03a7e6de008205b4f42076264b80561bf89f8;hpb=3e2cb34748f8b81f2b584da8174fce3bbcd5ae9e;p=goodfet

diff --git a/firmware/lib/msp430x1612.c b/firmware/lib/msp430x1612.c
index e1d03a7..386119f 100644
--- a/firmware/lib/msp430x1612.c
+++ b/firmware/lib/msp430x1612.c
@@ -6,7 +6,6 @@
 #include <io.h>
 #include <iomacros.h>
 
-
 //! Receive a byte.
 unsigned char serial_rx(){
   char c;
@@ -31,7 +30,6 @@ unsigned char serial1_rx(){
   return c;
 }
 
-
 //! Transmit a byte.
 void serial_tx(unsigned char x){
   while ((IFG1 & UTXIFG0) == 0); //loop until buffer is free
@@ -44,6 +42,14 @@ void serial1_tx(unsigned char x){
   TXBUF1 = x;
 }
 
+/** Later, add support for the EZ430/FETUIF with 12MHz crystal
+    UBR00=0xE2; UBR10=0x04; UMCTL0=0x00; // uart0 12000000Hz 9600bps
+    UBR00=0x71; UBR10=0x02; UMCTL0=0x00; // uart0 12000000Hz 19200bps
+    UBR00=0x38; UBR10=0x01; UMCTL0=0x55; // uart0 12000000Hz 38400bps
+    UBR00=0xD0; UBR10=0x00; UMCTL0=0x4A; // uart0 12000000Hz 57581bps
+    UBR00=0x68; UBR10=0x00; UMCTL0=0x04; // uart0 12000000Hz 115273bps
+ */
+
 //! Set the baud rate.
 void setbaud(unsigned char rate){
   
@@ -74,20 +80,20 @@ void setbaud1(unsigned char rate){
   //http://mspgcc.sourceforge.net/baudrate.html
   switch(rate){
   case 1://9600 baud
-    UBR01=0x7F; UBR11=0x01; UMCTL1=0x5B; /* uart0 3683400Hz 9599bps */
+    //    UBR01=0x7F; UBR11=0x01; UMCTL1=0x5B; /* uart0 3683400Hz 9599bps */
     break;
   case 2://19200 baud
-    UBR01=0xBF; UBR11=0x00; UMCTL1=0xF7; /* uart0 3683400Hz 19194bps */
+    //UBR01=0xBF; UBR11=0x00; UMCTL1=0xF7; /* uart0 3683400Hz 19194bps */
     break;
   case 3://38400 baud
-    UBR01=0x5F; UBR11=0x00; UMCTL1=0xBF; /* uart0 3683400Hz 38408bps */
+    //UBR01=0x5F; UBR11=0x00; UMCTL1=0xBF; /* uart0 3683400Hz 38408bps */
     break;
   case 4://57600 baud
-    UBR01=0x40; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 57553bps */
+    //UBR01=0x40; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 57553bps */
     break;
   default:
   case 5://115200 baud
-    UBR01=0x20; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 115106bps */
+    //UBR01=0x20; UBR11=0x00; UMCTL1=0x00; /* uart0 3683400Hz 115106bps */
     break;
   }
 }
@@ -95,6 +101,8 @@ void setbaud1(unsigned char rate){
 
 void msp430_init_uart(){
   
+  /* RS232 */
+  
   P3SEL |= BIT4|BIT5;                        // P3.4,5 = USART0 TXD/RXD
   P3DIR |= BIT4;
   
@@ -103,7 +111,6 @@ void msp430_init_uart(){
   
   setbaud(0);
   
-  //Necessary for bit-banging, switch to hardware for performance.
   ME1 &= ~USPIE0;			/* USART1 SPI module disable */
   ME1 |= (UTXE0 | URXE0);               /* Enable USART1 TXD/RXD */
 
@@ -117,8 +124,26 @@ void msp430_init_uart(){
 }
 
 
+/** For EZ430/FETUIF
+ void msp430_init_dco() {
+  WDTCTL = WDTPW + WDTHOLD; //stop WDT
+
+  BCSCTL1 = 0;
+
+  do {
+    int i;
+    IFG1 &= ~OFIFG;
+    for (i=0; i<1000; i++);
+
+  } while (IFG1 & OFIFG);
+
+  BCSCTL2 = SELM1 | DIVM1 | SELS;
+
+}
+ */
+
 void msp430_init_dco() {
-    /* This code taken from the FU Berlin sources and reformatted. */
+/* This code taken from the FU Berlin sources and reformatted. */
   //
 
 //Works well.
@@ -191,5 +216,6 @@ void msp430_init_dco() {
   BCSCTL1 &= ~(DIVA1 + DIVA0);          /* remove /8 divisor from ACLK again */
   
   P1OUT=0;
+
 }