X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=raspberrypi-native.cfg;h=4b3d493003e3253b7d9757f42ad79408c4f0df2f;hb=73c116e051bdbc20dce4e30a453ced3520c27f2b;hp=263d5318c52eb622441c03241d6a5d513217975b;hpb=3f0658541c6fe5b583025bc06fb514ef9d664234;p=x300-pci

diff --git a/raspberrypi-native.cfg b/raspberrypi-native.cfg
index 263d531..4b3d493 100644
--- a/raspberrypi-native.cfg
+++ b/raspberrypi-native.cfg
@@ -8,6 +8,10 @@
 # Do not forget the GND connection, pin 6 of the expansion header.
 #
 
+#gdb_port 3333
+telnet_port 4444
+tcl_port 6666
+
 interface bcm2835gpio
 
 bcm2835gpio_peripheral_base 0x20000000
@@ -20,7 +24,8 @@ bcm2835gpio_speed_coeffs 113714 28
 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
 # Header pin numbers: 23 22 19 21
 #bcm2835gpio_jtag_nums 11 25 10 9
-bcm2835gpio_jtag_nums 4 27 22 17
+
+
 
 # If you define trst or srst, use appropriate reset_config
 # Header pin numbers: TRST - 26, SRST - 18
@@ -34,3 +39,13 @@ bcm2835gpio_jtag_nums 4 27 22 17
 # or if you have both connected,
 # reset_config trst_and_srst srst_push_pull
 
+
+
+# XXX dpavlin x300 pci
+bcm2835gpio_jtag_nums 4 27 22 17
+
+# not really used for altera jtag, but we have to define it to make openocd happy
+bcm2835gpio_trst_num 18
+# reset_config trst_only
+reset_config none
+