X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=simavr%2Fsim%2Favr_uart.c;h=149d8b9e56fd4b38ac1c02407c3e2391036ede0e;hb=fb5a31d1e731a1d3f1993063496277c979ce356e;hp=e11679ce5267f042e0b788bc0341b5d359bf64fc;hpb=ff9ccdb6a1ad827c6d8c719f40c783b8e225d34c;p=simavr

diff --git a/simavr/sim/avr_uart.c b/simavr/sim/avr_uart.c
index e11679c..149d8b9 100644
--- a/simavr/sim/avr_uart.c
+++ b/simavr/sim/avr_uart.c
@@ -23,16 +23,33 @@
 	along with simavr.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#ifdef NO_COLOR
+	#define FONT_GREEN		
+	#define FONT_DEFAULT	
+#else
+	#define FONT_GREEN		"\e[32m"
+	#define FONT_DEFAULT	"\e[0m"
+#endif
+
 #include <stdio.h>
+#include <unistd.h>
+#include <stdint.h>
+#include <stdlib.h>
 #include "avr_uart.h"
+#include "sim_hex.h"
+
+//#define TRACE(_w) _w
+#ifndef TRACE
+#define TRACE(_w)
+#endif
 
-DEFINE_FIFO(uint8_t, uart_fifo, 128);
+DEFINE_FIFO(uint8_t, uart_fifo);
 
 static avr_cycle_count_t avr_uart_txc_raise(struct avr_t * avr, avr_cycle_count_t when, void * param)
 {
 	avr_uart_t * p = (avr_uart_t *)param;
 	if (avr_regbit_get(avr, p->txen)) {
-		// if the interrupts are not used, still raised the UDRE and TXC flaga
+		// if the interrupts are not used, still raise the UDRE and TXC flag
 		avr_raise_interrupt(avr, &p->udrc);
 		avr_raise_interrupt(avr, &p->txc);
 	}
@@ -47,10 +64,43 @@ static avr_cycle_count_t avr_uart_rxc_raise(struct avr_t * avr, avr_cycle_count_
 	return 0;
 }
 
+static uint8_t avr_uart_rxc_read(struct avr_t * avr, avr_io_addr_t addr, void * param)
+{
+	avr_uart_t * p = (avr_uart_t *)param;
+	uint8_t v = avr_core_watch_read(avr, addr);
+
+	//static uint8_t old = 0xff; if (v != old) printf("UCSRA read %02x\n", v); old = v;
+	//
+	// if RX is enabled, and there is nothing to read, and
+	// the AVR core is reading this register, it's probably
+	// to poll the RXC TXC flag and spinloop
+	// so here we introduce a usleep to make it a bit lighter
+	// on CPU and let data arrive
+	//
+	uint8_t ri = !avr_regbit_get(avr, p->rxen) || !avr_regbit_get(avr, p->rxc.raised);
+	uint8_t ti = !avr_regbit_get(avr, p->txen) || !avr_regbit_get(avr, p->txc.raised);
+
+	if (p->flags & AVR_UART_FLAG_POOL_SLEEP) {
+
+		if (ri && ti)
+			usleep(1);
+	}
+	// if reception is idle and the fifo is empty, tell whomever there is room
+	if (avr_regbit_get(avr, p->rxen) && uart_fifo_isempty(&p->input)) {
+		avr_raise_irq(p->io.irq + UART_IRQ_OUT_XOFF, 0);
+		avr_raise_irq(p->io.irq + UART_IRQ_OUT_XON, 1);
+	}
+
+	return v;
+}
+
 static uint8_t avr_uart_read(struct avr_t * avr, avr_io_addr_t addr, void * param)
 {
 	avr_uart_t * p = (avr_uart_t *)param;
 
+	// clear the rxc bit in case the code is using polling
+	avr_regbit_clear(avr, p->rxc.raised);
+
 	if (!avr_regbit_get(avr, p->rxen)) {
 		avr->data[addr] = 0;
 		// made to trigger potential watchpoints
@@ -59,16 +109,41 @@ static uint8_t avr_uart_read(struct avr_t * avr, avr_io_addr_t addr, void * para
 	}
 	uint8_t v = uart_fifo_read(&p->input);
 
+//	TRACE(printf("UART read %02x %s\n", v, uart_fifo_isempty(&p->input) ? "EMPTY!" : "");)
 	avr->data[addr] = v;
 	// made to trigger potential watchpoints
 	v = avr_core_watch_read(avr, addr);
 
+	// trigger timer if more characters are pending
 	if (!uart_fifo_isempty(&p->input))
-		avr_cycle_timer_register_usec(avr, 100, avr_uart_rxc_raise, p); // should be uart speed dependent
+		avr_cycle_timer_register_usec(avr, p->usec_per_byte, avr_uart_rxc_raise, p);
 
 	return v;
 }
 
+static void avr_uart_baud_write(struct avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
+{
+	avr_uart_t * p = (avr_uart_t *)param;
+	avr_core_watch_write(avr, addr, v);
+	uint32_t val = avr->data[p->r_ubrrl] | (avr->data[p->r_ubrrh] << 8);
+	uint32_t baud = avr->frequency / (val+1);
+	if (avr_regbit_get(avr, p->u2x))
+		baud /= 8;
+	else
+		baud /= 16;
+
+	const int databits[] = { 5,6,7,8,  /* 'reserved', assume 8 */8,8,8, 9 };
+	int db = databits[avr_regbit_get(avr, p->ucsz) | (avr_regbit_get(avr, p->ucsz2) << 2)];
+	int sb = 1 + avr_regbit_get(avr, p->usbs);
+	int word_size = 1 /* start */ + db /* data bits */ + 1 /* parity */ + sb /* stops */;
+
+	AVR_LOG(avr, LOG_TRACE, "UART: %c configured to %04x = %d bps (x%d), %d data %d stop\n",
+			p->name, val, baud, avr_regbit_get(avr, p->u2x)?2:1, db, sb);
+	// TODO: Use the divider value and calculate the straight number of cycles
+	p->usec_per_byte = 1000000 / (baud / word_size);
+	AVR_LOG(avr, LOG_TRACE, "UART: Roughly %d usec per bytes\n", (int)p->usec_per_byte);
+}
+
 static void avr_uart_write(struct avr_t * avr, avr_io_addr_t addr, uint8_t v, void * param)
 {
 	avr_uart_t * p = (avr_uart_t *)param;
@@ -76,33 +151,52 @@ static void avr_uart_write(struct avr_t * avr, avr_io_addr_t addr, uint8_t v, vo
 	if (addr == p->r_udr) {
 		avr_core_watch_write(avr, addr, v);
 
-		avr_regbit_clear(avr, p->udrc.raised);
-		avr_cycle_timer_register_usec(avr, 100, avr_uart_txc_raise, p); // should be uart speed dependent
-
-		static char buf[128];
-		static int l = 0;
-		buf[l++] = v < ' ' ? '.' : v;
-		buf[l] = 0;
-		if (v == '\n' || l == 127) {
-			l = 0;
-			printf("\e[32m%s\e[0m\n", buf);
+		if ( p->udrc.vector)
+			avr_regbit_clear(avr, p->udrc.raised);
+		avr_cycle_timer_register_usec(avr,
+				p->usec_per_byte, avr_uart_txc_raise, p); // should be uart speed dependent
+
+		if (p->flags & AVR_UART_FLAG_STDIO) {
+			const int maxsize = 256;
+			if (!p->stdio_out)
+				p->stdio_out = malloc(maxsize);
+			p->stdio_out[p->stdio_len++] = v < ' ' ? '.' : v;
+			p->stdio_out[p->stdio_len] = 0;
+			if (v == '\n' || p->stdio_len == maxsize) {
+				p->stdio_len = 0;
+				AVR_LOG(avr, LOG_TRACE, FONT_GREEN "%s\n" FONT_DEFAULT, p->stdio_out);
+			}
 		}
-//		printf("UDR%c(%02x) = %02x\n", p->name, addr, v);
-		// tell other modules we are "outputing" a byte
+		TRACE(printf("UDR%c(%02x) = %02x\n", p->name, addr, v);)
+		// tell other modules we are "outputting" a byte
 		if (avr_regbit_get(avr, p->txen))
 			avr_raise_irq(p->io.irq + UART_IRQ_OUTPUT, v);
-	} else {
+	}
+	if (p->udrc.vector && addr == p->udrc.enable.reg) {
+		/*
+		 * If enabling the UDRC interrupt, raise it immediately if FIFO is empty
+		 */
+		uint8_t udrce = avr_regbit_get(avr, p->udrc.enable);
+		avr_core_watch_write(avr, addr, v);
+		uint8_t nudrce = avr_regbit_get(avr, p->udrc.enable);
+		if (!udrce && nudrce) {
+			// if the FIDO is not empty (clear timer is flying) we don't
+			// need to raise the interrupt, it will happen when the timer
+			// is fired.
+			if (avr_cycle_timer_status(avr, avr_uart_txc_raise, p) == 0)
+				avr_raise_interrupt(avr, &p->udrc);
+		}
+	}
+	if (p->udrc.vector && addr == p->udrc.raised.reg) {
 		// get the bits before the write
-		uint8_t udre = avr_regbit_get(avr, p->udrc.raised);
+		//uint8_t udre = avr_regbit_get(avr, p->udrc.raised);
 		uint8_t txc = avr_regbit_get(avr, p->txc.raised);
 
+                // required for u2x (double uart transmission speed)
 		avr_core_watch_write(avr, addr, v);
 
-		// if writing one to a one, clear bit
-		if (udre && avr_regbit_get(avr, p->udrc.raised))
-			avr_regbit_clear(avr, p->udrc.raised);
-		if (txc && avr_regbit_get(avr, p->txc.raised))
-			avr_regbit_clear(avr, p->txc.raised);
+		//avr_clear_interrupt_if(avr, &p->udrc, udre);
+		avr_clear_interrupt_if(avr, &p->txc, txc);
 	}
 }
 
@@ -111,13 +205,18 @@ static void avr_uart_irq_input(struct avr_irq_t * irq, uint32_t value, void * pa
 	avr_uart_t * p = (avr_uart_t *)param;
 	avr_t * avr = p->io.avr;
 
-	// check to see fi receiver is enabled
+	// check to see if receiver is enabled
 	if (!avr_regbit_get(avr, p->rxen))
 		return;
 
 	if (uart_fifo_isempty(&p->input))
-		avr_cycle_timer_register_usec(avr, 100, avr_uart_rxc_raise, p); // should be uart speed dependent
+		avr_cycle_timer_register_usec(avr, p->usec_per_byte, avr_uart_rxc_raise, p); // should be uart speed dependent
 	uart_fifo_write(&p->input, value); // add to fifo
+
+	TRACE(printf("UART IRQ in %02x (%d/%d) %s\n", value, p->input.read, p->input.write, uart_fifo_isfull(&p->input) ? "FULL!!" : "");)
+
+	if (uart_fifo_isfull(&p->input))
+		avr_raise_irq(p->io.irq + UART_IRQ_OUT_XOFF, 1);
 }
 
 
@@ -125,20 +224,53 @@ void avr_uart_reset(struct avr_io_t *io)
 {
 	avr_uart_t * p = (avr_uart_t *)io;
 	avr_t * avr = p->io.avr;
-	avr_regbit_set(avr, p->udrc.raised);
+	if (p->udrc.vector)
+		avr_regbit_set(avr, p->udrc.raised);
 	avr_irq_register_notify(p->io.irq + UART_IRQ_INPUT, avr_uart_irq_input, p);
 	avr_cycle_timer_cancel(avr, avr_uart_rxc_raise, p);
 	avr_cycle_timer_cancel(avr, avr_uart_txc_raise, p);
 	uart_fifo_reset(&p->input);
 
-	// DEBUG allow printf without fidding with enabling the uart
+        avr_regbit_set(avr, p->ucsz);
+        avr_regbit_clear(avr, p->ucsz2);
+
+	// DEBUG allow printf without fiddling with enabling the uart
 	avr_regbit_set(avr, p->txen);
+	p->usec_per_byte = 100;
+}
+
+static int avr_uart_ioctl(struct avr_io_t * port, uint32_t ctl, void * io_param)
+{
+	avr_uart_t * p = (avr_uart_t *)port;
+	int res = -1;
+
+	if (!io_param)
+		return res;
 
+	if (ctl == AVR_IOCTL_UART_SET_FLAGS(p->name)) {
+		p->flags = *(uint32_t*)io_param;
+		res = 0;
+	}
+	if (ctl == AVR_IOCTL_UART_GET_FLAGS(p->name)) {
+		*(uint32_t*)io_param = p->flags;
+		res = 0;
+	}
+
+	return res;
 }
 
+static const char * irq_names[UART_IRQ_COUNT] = {
+	[UART_IRQ_INPUT] = "8<in",
+	[UART_IRQ_OUTPUT] = "8>out",
+	[UART_IRQ_OUT_XON] = ">xon",
+	[UART_IRQ_OUT_XOFF] = ">xoff",
+};
+
 static	avr_io_t	_io = {
 	.kind = "uart",
 	.reset = avr_uart_reset,
+	.ioctl = avr_uart_ioctl,
+	.irq_names = irq_names,
 };
 
 void avr_uart_init(avr_t * avr, avr_uart_t * p)
@@ -147,19 +279,28 @@ void avr_uart_init(avr_t * avr, avr_uart_t * p)
 
 //	printf("%s UART%c UDR=%02x\n", __FUNCTION__, p->name, p->r_udr);
 
-	// allocate this module's IRQ
-	p->io.irq_count = UART_IRQ_COUNT;
-	p->io.irq = avr_alloc_irq(0, p->io.irq_count);
-	p->io.irq_ioctl_get = AVR_IOCTL_UART_GETIRQ(p->name);
+	p->flags = AVR_UART_FLAG_POOL_SLEEP|AVR_UART_FLAG_STDIO;
 
 	avr_register_io(avr, &p->io);
 	avr_register_vector(avr, &p->rxc);
 	avr_register_vector(avr, &p->txc);
 	avr_register_vector(avr, &p->udrc);
 
+	// allocate this module's IRQ
+	avr_io_setirqs(&p->io, AVR_IOCTL_UART_GETIRQ(p->name), UART_IRQ_COUNT, NULL);
+	// Only call callbacks when the value change...
+	p->io.irq[UART_IRQ_OUT_XOFF].flags |= IRQ_FLAG_FILTERED;
+
 	avr_register_io_write(avr, p->r_udr, avr_uart_write, p);
 	avr_register_io_read(avr, p->r_udr, avr_uart_read, p);
-
-	avr_register_io_write(avr, p->r_ucsra, avr_uart_write, p);
+	// monitor code that reads the rxc flag, and delay it a bit
+	avr_register_io_read(avr, p->rxc.raised.reg, avr_uart_rxc_read, p);
+
+	if (p->udrc.vector)
+		avr_register_io_write(avr, p->udrc.enable.reg, avr_uart_write, p);
+	if (p->r_ucsra)
+		avr_register_io_write(avr, p->r_ucsra, avr_uart_write, p);
+	if (p->r_ubrrl)
+		avr_register_io_write(avr, p->r_ubrrl, avr_uart_baud_write, p);
 }