X-Git-Url: http://git.rot13.org/?a=blobdiff_plain;f=userapps%2Fopensource%2Fopenssl%2Fcrypto%2Frc4%2Fasm%2Frc4-586.pl;fp=userapps%2Fopensource%2Fopenssl%2Fcrypto%2Frc4%2Fasm%2Frc4-586.pl;h=d6e98f08117f1b580751d2c96db583e1eec85423;hb=864458111a0e69d94bbae210d5b7349ca072a6b7;hp=0000000000000000000000000000000000000000;hpb=57a096f051259ceaefd5977f30d269884e1dd248;p=bcm963xx.git

diff --git a/userapps/opensource/openssl/crypto/rc4/asm/rc4-586.pl b/userapps/opensource/openssl/crypto/rc4/asm/rc4-586.pl
new file mode 100755
index 00000000..d6e98f08
--- /dev/null
+++ b/userapps/opensource/openssl/crypto/rc4/asm/rc4-586.pl
@@ -0,0 +1,229 @@
+#!/usr/local/bin/perl
+
+# At some point it became apparent that the original SSLeay RC4
+# assembler implementation performs suboptimaly on latest IA-32
+# microarchitectures. After re-tuning performance has changed as
+# following:
+#
+# Pentium	+0%
+# Pentium III	+17%
+# AMD		+52%(*)
+# P4		+180%(**)
+#
+# (*)	This number is actually a trade-off:-) It's possible to
+#	achieve	+72%, but at the cost of -48% off PIII performance.
+#	In other words code performing further 13% faster on AMD
+#	would perform almost 2 times slower on Intel PIII...
+#	For reference! This code delivers ~80% of rc4-amd64.pl
+#	performance on the same Opteron machine.
+# (**)	This number requires compressed key schedule set up by
+#	RC4_set_key and therefore doesn't apply to 0.9.7 [option for
+#	compressed key schedule is implemented in 0.9.8 and later,
+#	see commentary section in rc4_skey.c for further details].
+#
+#					<appro@fy.chalmers.se>
+
+push(@INC,"perlasm","../../perlasm");
+require "x86asm.pl";
+
+&asm_init($ARGV[0],"rc4-586.pl");
+
+$x="eax";
+$y="ebx";
+$tx="ecx";
+$ty="edx";
+$in="esi";
+$out="edi";
+$d="ebp";
+
+&RC4("RC4");
+
+&asm_finish();
+
+sub RC4_loop
+	{
+	local($n,$p,$char)=@_;
+
+	&comment("Round $n");
+
+	if ($char)
+		{
+		if ($p >= 0)
+			{
+			 &mov($ty,	&swtmp(2));
+			&cmp($ty,	$in);
+			 &jbe(&label("finished"));
+			&inc($in);
+			}
+		else
+			{
+			&add($ty,	8);
+			 &inc($in);
+			&cmp($ty,	$in);
+			 &jb(&label("finished"));
+			&mov(&swtmp(2),	$ty);
+			}
+		}
+	# Moved out
+	# &mov(	$tx,		&DWP(0,$d,$x,4)) if $p < 0;
+
+	&add(	&LB($y),	&LB($tx));
+	&mov(	$ty,		&DWP(0,$d,$y,4));
+	 # XXX
+	&mov(	&DWP(0,$d,$x,4),$ty);
+	 &add(	$ty,		$tx);
+	&mov(	&DWP(0,$d,$y,4),$tx);
+	 &and(	$ty,		0xff);
+	 &inc(	&LB($x));			# NEXT ROUND
+	&mov(	$tx,		&DWP(0,$d,$x,4)) if $p < 1; # NEXT ROUND
+	 &mov(	$ty,		&DWP(0,$d,$ty,4));
+
+	if (!$char)
+		{
+		#moved up into last round
+		if ($p >= 1)
+			{
+			&add(	$out,	8)
+			}
+		&movb(	&BP($n,"esp","",0),	&LB($ty));
+		}
+	else
+		{
+		# Note in+=8 has occured
+		&movb(	&HB($ty),	&BP(-1,$in,"",0));
+		 # XXX
+		&xorb(&LB($ty),		&HB($ty));
+		 # XXX
+		&movb(&BP($n,$out,"",0),&LB($ty));
+		}
+	}
+
+
+sub RC4
+	{
+	local($name)=@_;
+
+	&function_begin_B($name,"");
+
+	&mov($ty,&wparam(1));		# len
+	&cmp($ty,0);
+	&jne(&label("proceed"));
+	&ret();
+	&set_label("proceed");
+
+	&comment("");
+
+	&push("ebp");
+	 &push("ebx");
+	&push("esi");
+	 &xor(	$x,	$x);		# avoid partial register stalls
+	&push("edi");
+	 &xor(	$y,	$y);		# avoid partial register stalls
+	&mov(	$d,	&wparam(0));	# key
+	 &mov(	$in,	&wparam(2));
+
+	&movb(	&LB($x),	&BP(0,$d,"",1));
+	 &movb(	&LB($y),	&BP(4,$d,"",1));
+
+	&mov(	$out,	&wparam(3));
+	 &inc(	&LB($x));
+
+	&stack_push(3);	# 3 temp variables
+	 &add(	$d,	8);
+
+	# detect compressed schedule, see commentary section in rc4_skey.c...
+	# in 0.9.7 context ~50 bytes below RC4_CHAR label remain redundant,
+	# as compressed key schedule is set up in 0.9.8 and later.
+	&cmp(&DWP(256,$d),-1);
+	&je(&label("RC4_CHAR"));
+
+	 &lea(	$ty,	&DWP(-8,$ty,$in));
+
+	# check for 0 length input
+
+	 &mov(	&swtmp(2),	$ty);	# this is now address to exit at
+	&mov(	$tx,	&DWP(0,$d,$x,4));
+
+	 &cmp(	$ty,	$in);
+	&jb(	&label("end")); # less than 8 bytes
+
+	&set_label("start");
+
+	# filling DELAY SLOT
+	&add(	$in,	8);
+
+	&RC4_loop(0,-1,0);
+	&RC4_loop(1,0,0);
+	&RC4_loop(2,0,0);
+	&RC4_loop(3,0,0);
+	&RC4_loop(4,0,0);
+	&RC4_loop(5,0,0);
+	&RC4_loop(6,0,0);
+	&RC4_loop(7,1,0);
+	
+	&comment("apply the cipher text");
+	# xor the cipher data with input
+
+	#&add(	$out,	8); #moved up into last round
+
+	&mov(	$tx,	&swtmp(0));
+	 &mov(	$ty,	&DWP(-8,$in,"",0));
+	&xor(	$tx,	$ty);
+	 &mov(	$ty,	&DWP(-4,$in,"",0)); 
+	&mov(	&DWP(-8,$out,"",0),	$tx);
+	 &mov(	$tx,	&swtmp(1));
+	&xor(	$tx,	$ty);
+	 &mov(	$ty,	&swtmp(2));	# load end ptr;
+	&mov(	&DWP(-4,$out,"",0),	$tx);
+	 &mov(	$tx,		&DWP(0,$d,$x,4));
+	&cmp($in,	$ty);
+	 &jbe(&label("start"));
+
+	&set_label("end");
+
+	# There is quite a bit of extra crap in RC4_loop() for this
+	# first round
+	&RC4_loop(0,-1,1);
+	&RC4_loop(1,0,1);
+	&RC4_loop(2,0,1);
+	&RC4_loop(3,0,1);
+	&RC4_loop(4,0,1);
+	&RC4_loop(5,0,1);
+	&RC4_loop(6,1,1);
+
+	&jmp(&label("finished"));
+
+	&align(16);
+	# this is essentially Intel P4 specific codepath, see rc4_skey.c,
+	# and is engaged in 0.9.8 and later context...
+	&set_label("RC4_CHAR");
+
+	&lea	($ty,&DWP(0,$in,$ty));
+	&mov	(&swtmp(2),$ty);
+
+	# strangely enough unrolled loop performs over 20% slower...
+	&set_label("RC4_CHAR_loop");
+		&movz	($tx,&BP(0,$d,$x));
+		&add	(&LB($y),&LB($tx));
+		&movz	($ty,&BP(0,$d,$y));
+		&movb	(&BP(0,$d,$y),&LB($tx));
+		&movb	(&BP(0,$d,$x),&LB($ty));
+		&add	(&LB($ty),&LB($tx));
+		&movz	($ty,&BP(0,$d,$ty));
+		&xorb	(&LB($ty),&BP(0,$in));
+		&movb	(&BP(0,$out),&LB($ty));
+		&inc	(&LB($x));
+		&inc	($in);
+		&inc	($out);
+		&cmp	($in,&swtmp(2));
+	&jb	(&label("RC4_CHAR_loop"));
+
+	&set_label("finished");
+	&dec(	$x);
+	 &stack_pop(3);
+	&movb(	&BP(-4,$d,"",0),&LB($y));
+	 &movb(	&BP(-8,$d,"",0),&LB($x));
+
+	&function_end($name);
+	}
+