# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc_64.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz head_64.o misc_64.o piggy.o
CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
-fno-strict-aliasing -fPIC -mcmodel=small \
LDFLAGS := -m elf_x86_64
LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
+$(obj)/vmlinux: $(src)/vmlinux_64.lds $(obj)/head_64.o $(obj)/misc_64.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
+++ /dev/null
-/*
- * linux/boot/head.S
- *
- * Copyright (C) 1991, 1992, 1993 Linus Torvalds
- */
-
-/*
- * head.S contains the 32-bit startup code.
- *
- * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
- * the page directory will exist. The startup code will be overwritten by
- * the page directory. [According to comments etc elsewhere on a compressed
- * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
- *
- * Page 0 is deliberately kept safe, since System Management Mode code in
- * laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
- * mode.
- */
-
-/*
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- */
-.code32
-.text
-
-#include <linux/linkage.h>
-#include <asm/segment.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-#include <asm/msr.h>
-
-.section ".text.head"
- .code32
- .globl startup_32
-
-startup_32:
- cld
- cli
- movl $(__KERNEL_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
-
-/* Calculate the delta between where we were compiled to run
- * at and where we were actually loaded at. This can only be done
- * with a short local call on x86. Nothing else will tell us what
- * address we are running at. The reserved chunk of the real-mode
- * data at 0x1e4 (defined as a scratch field) are used as the stack
- * for this calculation. Only 4 bytes are needed.
- */
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
-
-/* setup a stack and make sure cpu supports long mode. */
- movl $user_stack_end, %eax
- addl %ebp, %eax
- movl %eax, %esp
-
- call verify_cpu
- testl %eax, %eax
- jnz no_longmode
-
-/* Compute the delta between where we were compiled to run at
- * and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
- * contains the address where we should move the kernel image temporarily
- * for safe in-place decompression.
- */
-
-#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(LARGE_PAGE_SIZE -1), %ebx
- andl $LARGE_PAGE_MASK, %ebx
-#else
- movl $CONFIG_PHYSICAL_START, %ebx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
-
-/*
- * Prepare for entering 64 bit mode
- */
-
- /* Load new GDT with the 64bit segments using 32bit descriptor */
- leal gdt(%ebp), %eax
- movl %eax, gdt+2(%ebp)
- lgdt gdt(%ebp)
-
- /* Enable PAE mode */
- xorl %eax, %eax
- orl $(1 << 5), %eax
- movl %eax, %cr4
-
- /*
- * Build early 4G boot pagetable
- */
- /* Initialize Page tables to 0*/
- leal pgtable(%ebx), %edi
- xorl %eax, %eax
- movl $((4096*6)/4), %ecx
- rep stosl
-
- /* Build Level 4 */
- leal pgtable + 0(%ebx), %edi
- leal 0x1007 (%edi), %eax
- movl %eax, 0(%edi)
-
- /* Build Level 3 */
- leal pgtable + 0x1000(%ebx), %edi
- leal 0x1007(%edi), %eax
- movl $4, %ecx
-1: movl %eax, 0x00(%edi)
- addl $0x00001000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Build Level 2 */
- leal pgtable + 0x2000(%ebx), %edi
- movl $0x00000183, %eax
- movl $2048, %ecx
-1: movl %eax, 0(%edi)
- addl $0x00200000, %eax
- addl $8, %edi
- decl %ecx
- jnz 1b
-
- /* Enable the boot page tables */
- leal pgtable(%ebx), %eax
- movl %eax, %cr3
-
- /* Enable Long mode in EFER (Extended Feature Enable Register) */
- movl $MSR_EFER, %ecx
- rdmsr
- btsl $_EFER_LME, %eax
- wrmsr
-
- /* Setup for the jump to 64bit mode
- *
- * When the jump is performend we will be in long mode but
- * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
- * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
- * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
- * We place all of the values on our mini stack so lret can
- * used to perform that far jump.
- */
- pushl $__KERNEL_CS
- leal startup_64(%ebp), %eax
- pushl %eax
-
- /* Enter paged protected Mode, activating Long Mode */
- movl $0x80000001, %eax /* Enable Paging and Protected mode */
- movl %eax, %cr0
-
- /* Jump from 32bit compatibility mode into 64bit mode. */
- lret
-
-no_longmode:
- /* This isn't an x86-64 CPU so hang */
-1:
- hlt
- jmp 1b
-
-#include "../../kernel/verify_cpu_64.S"
-
- /* Be careful here startup_64 needs to be at a predictable
- * address so I can export it in an ELF header. Bootloaders
- * should look at the ELF header to find this address, as
- * it may change in the future.
- */
- .code64
- .org 0x200
-ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
- * 64bit bootloader. If we come here from a bootloader we depend on
- * an identity mapped page table being provied that maps our
- * entire text+data+bss and hopefully all of memory.
- */
-
- /* Setup data segments. */
- xorl %eax, %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %ss
- movl %eax, %fs
- movl %eax, %gs
- lldt %ax
- movl $0x20, %eax
- ltr %ax
-
- /* Compute the decompressed kernel start address. It is where
- * we were loaded at aligned to a 2M boundary. %rbp contains the
- * decompressed kernel start address.
- *
- * If it is a relocatable kernel then decompress and run the kernel
- * from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
- */
-
- /* Start with the delta to where the kernel will run at. */
-#ifdef CONFIG_RELOCATABLE
- leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(LARGE_PAGE_SIZE - 1), %rbp
- andq $LARGE_PAGE_MASK, %rbp
- movq %rbp, %rbx
-#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
-#endif
-
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
- * where decompression in place becomes safe.
- */
- leaq _end(%rip), %r8
- leaq _end(%rbx), %r9
- movq $_end /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
-
-/*
- * Jump to the relocated address.
- */
- leaq relocated(%rbx), %rax
- jmp *%rax
-
-.section ".text"
-relocated:
-
-/*
- * Clear BSS
- */
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end(%rbx), %rcx
- subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq user_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
-
-/*
- * Do the decompression, and jump to the new kernel..
- */
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq _heap(%rip), %rsi # _heap
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
- call decompress_kernel
- popq %rsi
-
-
-/*
- * Jump to the decompressed kernel.
- */
- jmp *%rbp
-
- .data
-gdt:
- .word gdt_end - gdt
- .long gdt
- .word 0
- .quad 0x0000000000000000 /* NULL descriptor */
- .quad 0x00af9a000000ffff /* __KERNEL_CS */
- .quad 0x00cf92000000ffff /* __KERNEL_DS */
- .quad 0x0080890000000000 /* TS descriptor */
- .quad 0x0000000000000000 /* TS continued */
-gdt_end:
- .bss
-/* Stack for uncompression */
- .balign 4
-user_stack:
- .fill 4096,4,0
-user_stack_end:
--- /dev/null
+/*
+ * linux/boot/head.S
+ *
+ * Copyright (C) 1991, 1992, 1993 Linus Torvalds
+ */
+
+/*
+ * head.S contains the 32-bit startup code.
+ *
+ * NOTE!!! Startup happens at absolute address 0x00001000, which is also where
+ * the page directory will exist. The startup code will be overwritten by
+ * the page directory. [According to comments etc elsewhere on a compressed
+ * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
+ *
+ * Page 0 is deliberately kept safe, since System Management Mode code in
+ * laptops may need to access the BIOS data stored there. This is also
+ * useful for future device drivers that either access the BIOS via VM86
+ * mode.
+ */
+
+/*
+ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
+ */
+.code32
+.text
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/pgtable.h>
+#include <asm/page.h>
+#include <asm/msr.h>
+
+.section ".text.head"
+ .code32
+ .globl startup_32
+
+startup_32:
+ cld
+ cli
+ movl $(__KERNEL_DS), %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+
+/* Calculate the delta between where we were compiled to run
+ * at and where we were actually loaded at. This can only be done
+ * with a short local call on x86. Nothing else will tell us what
+ * address we are running at. The reserved chunk of the real-mode
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
+ */
+ leal (0x1e4+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
+
+/* setup a stack and make sure cpu supports long mode. */
+ movl $user_stack_end, %eax
+ addl %ebp, %eax
+ movl %eax, %esp
+
+ call verify_cpu
+ testl %eax, %eax
+ jnz no_longmode
+
+/* Compute the delta between where we were compiled to run at
+ * and where the code will actually run at.
+ */
+/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ * contains the address where we should move the kernel image temporarily
+ * for safe in-place decompression.
+ */
+
+#ifdef CONFIG_RELOCATABLE
+ movl %ebp, %ebx
+ addl $(LARGE_PAGE_SIZE -1), %ebx
+ andl $LARGE_PAGE_MASK, %ebx
+#else
+ movl $CONFIG_PHYSICAL_START, %ebx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ subl input_len(%ebp), %ebx
+ movl output_len(%ebp), %eax
+ addl %eax, %ebx
+ /* Add 8 bytes for every 32K input block */
+ shrl $12, %eax
+ addl %eax, %ebx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addl $(32768 + 18 + 4095), %ebx
+ andl $~4095, %ebx
+
+/*
+ * Prepare for entering 64 bit mode
+ */
+
+ /* Load new GDT with the 64bit segments using 32bit descriptor */
+ leal gdt(%ebp), %eax
+ movl %eax, gdt+2(%ebp)
+ lgdt gdt(%ebp)
+
+ /* Enable PAE mode */
+ xorl %eax, %eax
+ orl $(1 << 5), %eax
+ movl %eax, %cr4
+
+ /*
+ * Build early 4G boot pagetable
+ */
+ /* Initialize Page tables to 0*/
+ leal pgtable(%ebx), %edi
+ xorl %eax, %eax
+ movl $((4096*6)/4), %ecx
+ rep stosl
+
+ /* Build Level 4 */
+ leal pgtable + 0(%ebx), %edi
+ leal 0x1007 (%edi), %eax
+ movl %eax, 0(%edi)
+
+ /* Build Level 3 */
+ leal pgtable + 0x1000(%ebx), %edi
+ leal 0x1007(%edi), %eax
+ movl $4, %ecx
+1: movl %eax, 0x00(%edi)
+ addl $0x00001000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Build Level 2 */
+ leal pgtable + 0x2000(%ebx), %edi
+ movl $0x00000183, %eax
+ movl $2048, %ecx
+1: movl %eax, 0(%edi)
+ addl $0x00200000, %eax
+ addl $8, %edi
+ decl %ecx
+ jnz 1b
+
+ /* Enable the boot page tables */
+ leal pgtable(%ebx), %eax
+ movl %eax, %cr3
+
+ /* Enable Long mode in EFER (Extended Feature Enable Register) */
+ movl $MSR_EFER, %ecx
+ rdmsr
+ btsl $_EFER_LME, %eax
+ wrmsr
+
+ /* Setup for the jump to 64bit mode
+ *
+ * When the jump is performend we will be in long mode but
+ * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
+ * (and in turn EFER.LMA = 1). To jump into 64bit mode we use
+ * the new gdt/idt that has __KERNEL_CS with CS.L = 1.
+ * We place all of the values on our mini stack so lret can
+ * used to perform that far jump.
+ */
+ pushl $__KERNEL_CS
+ leal startup_64(%ebp), %eax
+ pushl %eax
+
+ /* Enter paged protected Mode, activating Long Mode */
+ movl $0x80000001, %eax /* Enable Paging and Protected mode */
+ movl %eax, %cr0
+
+ /* Jump from 32bit compatibility mode into 64bit mode. */
+ lret
+
+no_longmode:
+ /* This isn't an x86-64 CPU so hang */
+1:
+ hlt
+ jmp 1b
+
+#include "../../kernel/verify_cpu_64.S"
+
+ /* Be careful here startup_64 needs to be at a predictable
+ * address so I can export it in an ELF header. Bootloaders
+ * should look at the ELF header to find this address, as
+ * it may change in the future.
+ */
+ .code64
+ .org 0x200
+ENTRY(startup_64)
+ /* We come here either from startup_32 or directly from a
+ * 64bit bootloader. If we come here from a bootloader we depend on
+ * an identity mapped page table being provied that maps our
+ * entire text+data+bss and hopefully all of memory.
+ */
+
+ /* Setup data segments. */
+ xorl %eax, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+ movl %eax, %fs
+ movl %eax, %gs
+ lldt %ax
+ movl $0x20, %eax
+ ltr %ax
+
+ /* Compute the decompressed kernel start address. It is where
+ * we were loaded at aligned to a 2M boundary. %rbp contains the
+ * decompressed kernel start address.
+ *
+ * If it is a relocatable kernel then decompress and run the kernel
+ * from load address aligned to 2MB addr, otherwise decompress and
+ * run the kernel from CONFIG_PHYSICAL_START
+ */
+
+ /* Start with the delta to where the kernel will run at. */
+#ifdef CONFIG_RELOCATABLE
+ leaq startup_32(%rip) /* - $startup_32 */, %rbp
+ addq $(LARGE_PAGE_SIZE - 1), %rbp
+ andq $LARGE_PAGE_MASK, %rbp
+ movq %rbp, %rbx
+#else
+ movq $CONFIG_PHYSICAL_START, %rbp
+ movq %rbp, %rbx
+#endif
+
+ /* Replace the compressed data size with the uncompressed size */
+ movl input_len(%rip), %eax
+ subq %rax, %rbx
+ movl output_len(%rip), %eax
+ addq %rax, %rbx
+ /* Add 8 bytes for every 32K input block */
+ shrq $12, %rax
+ addq %rax, %rbx
+ /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
+ addq $(32768 + 18 + 4095), %rbx
+ andq $~4095, %rbx
+
+/* Copy the compressed kernel to the end of our buffer
+ * where decompression in place becomes safe.
+ */
+ leaq _end(%rip), %r8
+ leaq _end(%rbx), %r9
+ movq $_end /* - $startup_32 */, %rcx
+1: subq $8, %r8
+ subq $8, %r9
+ movq 0(%r8), %rax
+ movq %rax, 0(%r9)
+ subq $8, %rcx
+ jnz 1b
+
+/*
+ * Jump to the relocated address.
+ */
+ leaq relocated(%rbx), %rax
+ jmp *%rax
+
+.section ".text"
+relocated:
+
+/*
+ * Clear BSS
+ */
+ xorq %rax, %rax
+ leaq _edata(%rbx), %rdi
+ leaq _end(%rbx), %rcx
+ subq %rdi, %rcx
+ cld
+ rep
+ stosb
+
+ /* Setup the stack */
+ leaq user_stack_end(%rip), %rsp
+
+ /* zero EFLAGS after setting rsp */
+ pushq $0
+ popfq
+
+/*
+ * Do the decompression, and jump to the new kernel..
+ */
+ pushq %rsi # Save the real mode argument
+ movq %rsi, %rdi # real mode address
+ leaq _heap(%rip), %rsi # _heap
+ leaq input_data(%rip), %rdx # input_data
+ movl input_len(%rip), %eax
+ movq %rax, %rcx # input_len
+ movq %rbp, %r8 # output
+ call decompress_kernel
+ popq %rsi
+
+
+/*
+ * Jump to the decompressed kernel.
+ */
+ jmp *%rbp
+
+ .data
+gdt:
+ .word gdt_end - gdt
+ .long gdt
+ .word 0
+ .quad 0x0000000000000000 /* NULL descriptor */
+ .quad 0x00af9a000000ffff /* __KERNEL_CS */
+ .quad 0x00cf92000000ffff /* __KERNEL_DS */
+ .quad 0x0080890000000000 /* TS descriptor */
+ .quad 0x0000000000000000 /* TS continued */
+gdt_end:
+ .bss
+/* Stack for uncompression */
+ .balign 4
+user_stack:
+ .fill 4096,4,0
+user_stack_end:
projects / powerpc.git / commitdiff