ARM: dts: logicpd-som-lv: Fix WL127x Startup Issues

The VAUX3 rail from the PMIC powers a clock driver which clocks
the WL127x. This corrects a bug which did not correctly associate
the vin-supply with the proper power rail.

This also fixes a typo in the pinmuxing to properly configure the
interrupt pin.

Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b47cac2..40eadbf 100644 (file)
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -26,7 +26,7 @@
                gpio = <&gpio1 3 0>;   /* gpio_3 */
                startup-delay-us = <70000>;
                enable-active-high;
-               vin-supply = <&vmmc2>;
+               vin-supply = <&vaux3>;
        };
 
        /* HS USB Host PHY on PORT 1 */
@@ -213,7 +213,7 @@
        };
        wl127x_gpio: pinmux_wl127x_gpio_pin {
                pinctrl-single,pins = <
-                       OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4)         /* sys_boot0.gpio_2 */
+                       OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4)         /* sys_boot0.gpio_2 */
                        OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)        /* sys_boot1.gpio_3 */
                >;
        };
@@ -260,6 +260,11 @@
 #include "twl4030.dtsi"
 #include "twl4030_omap3.dtsi"
 
+&vaux3 {
+       regulator-min-microvolt = <2800000>;
+       regulator-max-microvolt = <2800000>;
+};
+
 &twl {
        twl_power: power {
                compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";