--- /dev/null
+/*
+ */
+
+#ifndef MSP3400_DRIVER_H
+#define MSP3400_DRIVER_H
+
+/* ---------------------------------------------------------------------- */
+
+/* This macro is allowed for *constants* only, gcc must calculate it
+ at compile time. Remember -- no floats in kernel mode */
+#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
+
+#define MSP_MODE_AM_DETECT 0
+#define MSP_MODE_FM_RADIO 2
+#define MSP_MODE_FM_TERRA 3
+#define MSP_MODE_FM_SAT 4
+#define MSP_MODE_FM_NICAM1 5
+#define MSP_MODE_FM_NICAM2 6
+#define MSP_MODE_AM_NICAM 7
+#define MSP_MODE_BTSC 8
+#define MSP_MODE_EXTERN 9
+
+#define SCART_IN1 0
+#define SCART_IN2 1
+#define SCART_IN3 2
+#define SCART_IN4 3
+#define SCART_IN1_DA 4
+#define SCART_IN2_DA 5
+#define SCART_MONO 6
+#define SCART_MUTE 7
+
+#define SCART_DSP_IN 0
+#define SCART1_OUT 1
+#define SCART2_OUT 2
+
+#define OPMODE_AUTO -1
+#define OPMODE_MANUAL 0
+#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */
+#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */
+
+/* module parameters */
+extern int msp_debug;
+extern int msp_once;
+extern int msp_amsound;
+extern int msp_standard;
+extern int msp_dolby;
+extern int msp_stereo_thresh;
+
+struct msp_state {
+ int rev1, rev2;
+ u8 has_nicam;
+ u8 has_radio;
+ u8 has_headphones;
+ u8 has_ntsc_jp_d_k3;
+ u8 has_scart4;
+ u8 has_scart23_in_scart2_out;
+ u8 has_scart2_out_volume;
+ u8 has_i2s_conf;
+ u8 has_subwoofer;
+ u8 has_sound_processing;
+ u8 has_virtual_dolby_surround;
+ u8 has_dolby_pro_logic;
+
+ int radio;
+ int opmode;
+ int std;
+ int mode;
+ v4l2_std_id v4l2_std;
+ int nicam_on;
+ int acb;
+ int in_scart;
+ int i2s_mode;
+ int main, second; /* sound carrier */
+ int input;
+ int source; /* see msp34xxg_set_source */
+
+ /* v4l2 */
+ int audmode;
+ int rxsubchans;
+
+ int volume, muted;
+ int balance, loudness;
+ int bass, treble;
+
+ /* thread */
+ struct task_struct *kthread;
+ wait_queue_head_t wq;
+ int restart:1;
+ int watch_stereo:1;
+};
+
+/* msp3400-driver.c */
+int msp_write_dem(struct i2c_client *client, int addr, int val);
+int msp_write_dsp(struct i2c_client *client, int addr, int val);
+int msp_read_dem(struct i2c_client *client, int addr);
+int msp_read_dsp(struct i2c_client *client, int addr);
+int msp_reset(struct i2c_client *client);
+void msp_set_scart(struct i2c_client *client, int in, int out);
+void msp_set_mute(struct i2c_client *client);
+void msp_set_audio(struct i2c_client *client);
+int msp_sleep(struct msp_state *state, int timeout);
+
+/* msp3400-kthreads.c */
+const char *msp_standard_std_name(int std);
+void msp_set_audmode(struct i2c_client *client);
+int msp_detect_stereo(struct i2c_client *client);
+int msp3400c_thread(void *data);
+int msp3410d_thread(void *data);
+int msp34xxg_thread(void *data);
+void msp3400c_set_mode(struct i2c_client *client, int mode);
+void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2);
+
+#endif /* MSP3400_DRIVER_H */
+++ /dev/null
-/*
- */
-
-#ifndef MSP3400_H
-#define MSP3400_H
-
-/* ---------------------------------------------------------------------- */
-
-/* This macro is allowed for *constants* only, gcc must calculate it
- at compile time. Remember -- no floats in kernel mode */
-#define MSP_CARRIER(freq) ((int)((float)(freq / 18.432) * (1 << 24)))
-
-#define MSP_MODE_AM_DETECT 0
-#define MSP_MODE_FM_RADIO 2
-#define MSP_MODE_FM_TERRA 3
-#define MSP_MODE_FM_SAT 4
-#define MSP_MODE_FM_NICAM1 5
-#define MSP_MODE_FM_NICAM2 6
-#define MSP_MODE_AM_NICAM 7
-#define MSP_MODE_BTSC 8
-#define MSP_MODE_EXTERN 9
-
-#define SCART_IN1 0
-#define SCART_IN2 1
-#define SCART_IN3 2
-#define SCART_IN4 3
-#define SCART_IN1_DA 4
-#define SCART_IN2_DA 5
-#define SCART_MONO 6
-#define SCART_MUTE 7
-
-#define SCART_DSP_IN 0
-#define SCART1_OUT 1
-#define SCART2_OUT 2
-
-#define OPMODE_AUTO -1
-#define OPMODE_MANUAL 0
-#define OPMODE_AUTODETECT 1 /* use autodetect (>= msp3410 only) */
-#define OPMODE_AUTOSELECT 2 /* use autodetect & autoselect (>= msp34xxG) */
-
-/* module parameters */
-extern int msp_debug;
-extern int msp_once;
-extern int msp_amsound;
-extern int msp_standard;
-extern int msp_dolby;
-extern int msp_stereo_thresh;
-
-struct msp_state {
- int rev1, rev2;
- u8 has_nicam;
- u8 has_radio;
- u8 has_headphones;
- u8 has_ntsc_jp_d_k3;
- u8 has_scart4;
- u8 has_scart23_in_scart2_out;
- u8 has_scart2_out_volume;
- u8 has_i2s_conf;
- u8 has_subwoofer;
- u8 has_sound_processing;
- u8 has_virtual_dolby_surround;
- u8 has_dolby_pro_logic;
-
- int radio;
- int opmode;
- int std;
- int mode;
- v4l2_std_id v4l2_std;
- int nicam_on;
- int acb;
- int in_scart;
- int i2s_mode;
- int main, second; /* sound carrier */
- int input;
- int source; /* see msp34xxg_set_source */
-
- /* v4l2 */
- int audmode;
- int rxsubchans;
-
- int volume, muted;
- int balance, loudness;
- int bass, treble;
-
- /* thread */
- struct task_struct *kthread;
- wait_queue_head_t wq;
- int restart:1;
- int watch_stereo:1;
-};
-
-/* msp3400-driver.c */
-int msp_write_dem(struct i2c_client *client, int addr, int val);
-int msp_write_dsp(struct i2c_client *client, int addr, int val);
-int msp_read_dem(struct i2c_client *client, int addr);
-int msp_read_dsp(struct i2c_client *client, int addr);
-int msp_reset(struct i2c_client *client);
-void msp_set_scart(struct i2c_client *client, int in, int out);
-void msp_set_mute(struct i2c_client *client);
-void msp_set_audio(struct i2c_client *client);
-int msp_sleep(struct msp_state *state, int timeout);
-
-/* msp3400-kthreads.c */
-const char *msp_standard_std_name(int std);
-void msp_set_audmode(struct i2c_client *client);
-int msp_detect_stereo(struct i2c_client *client);
-int msp3400c_thread(void *data);
-int msp3410d_thread(void *data);
-int msp34xxg_thread(void *data);
-void msp3400c_set_mode(struct i2c_client *client, int mode);
-void msp3400c_set_carrier(struct i2c_client *client, int cdo1, int cdo2);
-
-#endif /* MSP3400_H */
--- /dev/null
+/*
+ msp3400.h - definition for msp3400 inputs and outputs
+
+ Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl)
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef _MSP3400_H_
+#define _MSP3400_H_
+
+/* msp3400 routing
+ ===============
+
+ The msp3400 has a complicated routing scheme with many possible
+ combinations. The details are all in the datasheets but I will try
+ to give a short description here.
+
+ Inputs
+ ======
+
+ There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have
+ to select which tuner input to use and which SCART input to use. The
+ selected tuner input, the selected SCART input and all I2S inputs go to
+ the DSP (the tuner input first goes through the demodulator).
+
+ The DSP handles things like volume, bass/treble, balance, and some chips
+ have support for surround sound. It has several outputs: MAIN, AUX, I2S
+ and SCART1/2. Each output can select which DSP input to use. So the MAIN
+ output can select the tuner input while at the same time the SCART1 output
+ uses the I2S input.
+
+ Outputs
+ =======
+
+ Most DSP outputs are also the outputs of the msp3400. However, the SCART
+ outputs of the msp3400 can select which input to use: either the SCART1 or
+ SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely
+ bypassing the DSP.
+
+ Summary
+ =======
+
+ So to specify a complete routing scheme for the msp3400 you will have to
+ specify in the 'input' field of the v4l2_routing struct:
+
+ 1) which tuner input to use
+ 2) which SCART input to use
+ 3) which DSP input to use for each DSP output
+
+ And in the 'output' field of the v4l2_routing struct you specify:
+
+ 1) which SCART input to use for each SCART output
+
+ Depending on how the msp is wired to the other components you can
+ ignore or mute certain inputs or outputs.
+
+ Also, depending on the msp version only a subset of the inputs or
+ outputs may be present. At the end of this header some tables are
+ added containing a list of what is available for each msp version.
+ */
+
+/* Inputs to the DSP unit: two independent selections have to be made:
+ 1) the tuner (SIF) input
+ 2) the SCART input
+ Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner
+ input, bits 4-7 are reserved.
+ */
+
+/* SCART input to DSP selection */
+#define MSP_IN_SCART_1 0 /* Pin SC1_IN */
+#define MSP_IN_SCART_2 1 /* Pin SC2_IN */
+#define MSP_IN_SCART_3 2 /* Pin SC3_IN */
+#define MSP_IN_SCART_4 3 /* Pin SC4_IN */
+#define MSP_IN_MONO 6 /* Pin MONO_IN */
+#define MSP_IN_MUTE 7 /* Mute DSP input */
+#define MSP_SCART_TO_DSP(in) (in)
+/* Tuner input to demodulator and DSP selection */
+#define MSP_IN_TUNER_1 0 /* Analog Sound IF input pin ANA_IN1 */
+#define MSP_IN_TUNER_2 1 /* Analog Sound IF input pin ANA_IN2 */
+#define MSP_TUNER_TO_DSP(in) ((in) << 3)
+
+/* The msp has up to 5 DSP outputs, each output can independently select
+ a DSP input.
+
+ The DSP outputs are: loudspeaker output (aka MAIN), headphones output
+ (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output.
+ There also is a quasi-peak detector output, but that is not used by
+ this driver and is set to the same input as the loudspeaker output.
+ Not all outputs are supported by all msp models. Setting the input
+ of an unsupported output will be ignored by the driver.
+
+ There are up to 16 DSP inputs to choose from, so each output is
+ assigned 4 bits.
+
+ Note: the 44x8G can mix two inputs and feed the result back to the
+ DSP. This is currently not implemented. Also not implemented is the
+ multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate
+ a need for one of those features then additional support can be added. */
+#define MSP_DSP_OUT_TUNER 0 /* Tuner output */
+#define MSP_DSP_OUT_SCART 2 /* SCART output */
+#define MSP_DSP_OUT_I2S1 5 /* I2S1 output */
+#define MSP_DSP_OUT_I2S2 6 /* I2S2 output */
+#define MSP_DSP_OUT_I2S3 7 /* I2S3 output */
+#define MSP_DSP_OUT_MAIN_AVC 11 /* MAIN AVC processed output */
+#define MSP_DSP_OUT_MAIN 12 /* MAIN output */
+#define MSP_DSP_OUT_AUX 13 /* AUX output */
+#define MSP_DSP_TO_MAIN(in) ((in) << 4)
+#define MSP_DSP_TO_AUX(in) ((in) << 8)
+#define MSP_DSP_TO_SCART1(in) ((in) << 12)
+#define MSP_DSP_TO_SCART2(in) ((in) << 16)
+#define MSP_DSP_TO_I2S(in) ((in) << 20)
+
+/* Output SCART select: the SCART outputs can select which input
+ to use. */
+#define MSP_OUT_SCART1 0 /* SCART1 input, bypassing the DSP */
+#define MSP_OUT_SCART2 1 /* SCART2 input, bypassing the DSP */
+#define MSP_OUT_SCART3 2 /* SCART3 input, bypassing the DSP */
+#define MSP_OUT_SCART4 3 /* SCART4 input, bypassing the DSP */
+#define MSP_OUT_SCART1_DA 4 /* DSP SCART1 output */
+#define MSP_OUT_SCART2_DA 5 /* DSP SCART2 output */
+#define MSP_OUT_MONO 6 /* MONO input, bypassing the DSP */
+#define MSP_OUT_MUTE 7 /* MUTE output */
+#define MSP_OUT_TO_SCART1(in) (in)
+#define MSP_OUT_TO_SCART2(in) ((in) << 4)
+
+/* Shortcut macros */
+#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \
+ (MSP_SCART_TO_DSP(sc) | \
+ MSP_TUNER_TO_DSP(t) | \
+ MSP_DSP_TO_MAIN(main_aux_src) | \
+ MSP_DSP_TO_AUX(main_aux_src) | \
+ MSP_DSP_TO_SCART1(sc_i2s_src) | \
+ MSP_DSP_TO_SCART2(sc_i2s_src) | \
+ MSP_DSP_TO_I2S(sc_i2s_src))
+#define MSP_OUTPUT(sc) \
+ (MSP_OUT_TO_SCART1(sc) | \
+ MSP_OUT_TO_SCART2(sc))
+
+/* Tuner inputs vs. msp version */
+/* Chip TUNER_1 TUNER_2
+ -------------------------
+ msp34x0b y y
+ msp34x0c y y
+ msp34x0d y y
+ msp34x5d y n
+ msp34x7d y n
+ msp34x0g y y
+ msp34x1g y y
+ msp34x2g y y
+ msp34x5g y n
+ msp34x7g y n
+ msp44x0g y y
+ msp44x8g y y
+ */
+
+/* SCART inputs vs. msp version */
+/* Chip SC1 SC2 SC3 SC4
+ -------------------------
+ msp34x0b y y y n
+ msp34x0c y y y n
+ msp34x0d y y y y
+ msp34x5d y y n n
+ msp34x7d y n n n
+ msp34x0g y y y y
+ msp34x1g y y y y
+ msp34x2g y y y y
+ msp34x5g y y n n
+ msp34x7g y n n n
+ msp44x0g y y y y
+ msp44x8g y y y y
+ */
+
+/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */
+/* Chip I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX
+ ------------------------------------------
+ msp34x0b y n n n n n
+ msp34x0c y y n n n n
+ msp34x0d y y n n n n
+ msp34x5d y y n n n n
+ msp34x7d n n n n n n
+ msp34x0g y y n n n n
+ msp34x1g y y n n n n
+ msp34x2g y y n y y y
+ msp34x5g y y n n n n
+ msp34x7g n n n n n n
+ msp44x0g y y y y y y
+ msp44x8g y y y n n n
+ */
+
+/* DSP outputs vs. msp version */
+/* Chip MAIN AUX SCART1 SCART2 I2S
+ ------------------------------------
+ msp34x0b y y y n y
+ msp34x0c y y y n y
+ msp34x0d y y y y y
+ msp34x5d y n y n y
+ msp34x7d y n y n n
+ msp34x0g y y y y y
+ msp34x1g y y y y y
+ msp34x2g y y y y y
+ msp34x5g y n y n y
+ msp34x7g y n y n n
+ msp44x0g y y y y y
+ msp44x8g y y y y y
+ */
+
+#endif /* MSP3400_H */
+
projects / powerpc.git / commitdiff