hwmon: (adm1025) Various cleanups

* Whitespace cleanups
* Constify scaling constants
* Fold long lines
* Drop redundant initializations to 0
* Rename new_client to just client
* Use sysfs_create_group()
* Drop a useless comment

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>

diff --git a/drivers/hwmon/adm1025.c b/drivers/hwmon/adm1025.c
index 92aaa98..c7a365a 100644 (file)
--- a/drivers/hwmon/adm1025.c
+++ b/drivers/hwmon/adm1025.c
@@ -75,7 +75,7 @@ I2C_CLIENT_INSMOD_2(adm1025, ne1619);
  */
 
 #define ADM1025_REG_MAN_ID             0x3E
-#define ADM1025_REG_CHIP_ID            0x3F
+#define ADM1025_REG_CHIP_ID            0x3F
 #define ADM1025_REG_CONFIG             0x40
 #define ADM1025_REG_STATUS1            0x41
 #define ADM1025_REG_STATUS2            0x42
@@ -93,7 +93,7 @@ I2C_CLIENT_INSMOD_2(adm1025, ne1619);
  * The ADM1025 uses signed 8-bit values for temperatures.
  */
 
-static int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
+static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
 
 #define IN_FROM_REG(reg,scale) (((reg) * (scale) + 96) / 192)
 #define IN_TO_REG(val,scale)   ((val) <= 0 ? 0 : \
@@ -293,7 +293,8 @@ static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
 set_temp(1);
 set_temp(2);
 
-static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_alarms(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct adm1025_data *data = adm1025_update_device(dev);
        return sprintf(buf, "%u\n", data->alarms);
@@ -317,19 +318,22 @@ static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 5);
 static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 4);
 static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
 
-static ssize_t show_vid(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_vid(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct adm1025_data *data = adm1025_update_device(dev);
        return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
 }
 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid, NULL);
 
-static ssize_t show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
+static ssize_t
+show_vrm(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct adm1025_data *data = dev_get_drvdata(dev);
        return sprintf(buf, "%u\n", data->vrm);
 }
-static ssize_t set_vrm(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+static ssize_t set_vrm(struct device *dev, struct device_attribute *attr,
+                      const char *buf, size_t count)
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct adm1025_data *data = i2c_get_clientdata(client);
@@ -389,7 +393,7 @@ static const struct attribute_group adm1025_group = {
        .attrs = adm1025_attributes,
 };
 
-static struct attribute *adm1025_attributes_opt[] = {
+static struct attribute *adm1025_attributes_in4[] = {
        &sensor_dev_attr_in4_input.dev_attr.attr,
        &sensor_dev_attr_in4_min.dev_attr.attr,
        &sensor_dev_attr_in4_max.dev_attr.attr,
@@ -397,8 +401,8 @@ static struct attribute *adm1025_attributes_opt[] = {
        NULL
 };
 
-static const struct attribute_group adm1025_group_opt = {
-       .attrs = adm1025_attributes_opt,
+static const struct attribute_group adm1025_group_in4 = {
+       .attrs = adm1025_attributes_in4,
 };
 
 /*
@@ -407,7 +411,7 @@ static const struct attribute_group adm1025_group_opt = {
  */
 static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
 {
-       struct i2c_client *new_client;
+       struct i2c_client *client;
        struct adm1025_data *data;
        int err = 0;
        const char *name = "";
@@ -421,14 +425,11 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
                goto exit;
        }
 
-       /* The common I2C client data is placed right before the
-          ADM1025-specific data. */
-       new_client = &data->client;
-       i2c_set_clientdata(new_client, data);
-       new_client->addr = address;
-       new_client->adapter = adapter;
-       new_client->driver = &adm1025_driver;
-       new_client->flags = 0;
+       client = &data->client;
+       i2c_set_clientdata(client, data);
+       client->addr = address;
+       client->adapter = adapter;
+       client->driver = &adm1025_driver;
 
        /*
         * Now we do the remaining detection. A negative kind means that
@@ -440,12 +441,12 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
         * requested, so both the detection and the identification steps
         * are skipped.
         */
-       config = i2c_smbus_read_byte_data(new_client, ADM1025_REG_CONFIG);
+       config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
        if (kind < 0) { /* detection */
                if ((config & 0x80) != 0x00
-                || (i2c_smbus_read_byte_data(new_client,
+                || (i2c_smbus_read_byte_data(client,
                     ADM1025_REG_STATUS1) & 0xC0) != 0x00
-                || (i2c_smbus_read_byte_data(new_client,
+                || (i2c_smbus_read_byte_data(client,
                     ADM1025_REG_STATUS2) & 0xBC) != 0x00) {
                        dev_dbg(&adapter->dev,
                                "ADM1025 detection failed at 0x%02x.\n",
@@ -457,11 +458,9 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
        if (kind <= 0) { /* identification */
                u8 man_id, chip_id;
 
-               man_id = i2c_smbus_read_byte_data(new_client,
-                        ADM1025_REG_MAN_ID);
-               chip_id = i2c_smbus_read_byte_data(new_client,
-                         ADM1025_REG_CHIP_ID);
-               
+               man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
+               chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
+
                if (man_id == 0x41) { /* Analog Devices */
                        if ((chip_id & 0xF0) == 0x20) { /* ADM1025/ADM1025A */
                                kind = adm1025;
@@ -489,35 +488,28 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
        }
 
        /* We can fill in the remaining client fields */
-       strlcpy(new_client->name, name, I2C_NAME_SIZE);
-       data->valid = 0;
+       strlcpy(client->name, name, I2C_NAME_SIZE);
        mutex_init(&data->update_lock);
 
        /* Tell the I2C layer a new client has arrived */
-       if ((err = i2c_attach_client(new_client)))
+       if ((err = i2c_attach_client(client)))
                goto exit_free;
 
        /* Initialize the ADM1025 chip */
-       adm1025_init_client(new_client);
+       adm1025_init_client(client);
 
        /* Register sysfs hooks */
-       if ((err = sysfs_create_group(&new_client->dev.kobj, &adm1025_group)))
+       if ((err = sysfs_create_group(&client->dev.kobj, &adm1025_group)))
                goto exit_detach;
 
        /* Pin 11 is either in4 (+12V) or VID4 */
        if (!(config & 0x20)) {
-               if ((err = device_create_file(&new_client->dev,
-                                       &sensor_dev_attr_in4_input.dev_attr))
-                || (err = device_create_file(&new_client->dev,
-                                       &sensor_dev_attr_in4_min.dev_attr))
-                || (err = device_create_file(&new_client->dev,
-                                       &sensor_dev_attr_in4_max.dev_attr))
-                || (err = device_create_file(&new_client->dev,
-                                       &sensor_dev_attr_in4_alarm.dev_attr)))
+               if ((err = sysfs_create_group(&client->dev.kobj,
+                                             &adm1025_group_in4)))
                        goto exit_remove;
        }
 
-       data->hwmon_dev = hwmon_device_register(&new_client->dev);
+       data->hwmon_dev = hwmon_device_register(&client->dev);
        if (IS_ERR(data->hwmon_dev)) {
                err = PTR_ERR(data->hwmon_dev);
                goto exit_remove;
@@ -526,10 +518,10 @@ static int adm1025_detect(struct i2c_adapter *adapter, int address, int kind)
        return 0;
 
 exit_remove:
-       sysfs_remove_group(&new_client->dev.kobj, &adm1025_group);
-       sysfs_remove_group(&new_client->dev.kobj, &adm1025_group_opt);
+       sysfs_remove_group(&client->dev.kobj, &adm1025_group);
+       sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
 exit_detach:
-       i2c_detach_client(new_client);
+       i2c_detach_client(client);
 exit_free:
        kfree(data);
 exit:
@@ -585,7 +577,7 @@ static int adm1025_detach_client(struct i2c_client *client)
 
        hwmon_device_unregister(data->hwmon_dev);
        sysfs_remove_group(&client->dev.kobj, &adm1025_group);
-       sysfs_remove_group(&client->dev.kobj, &adm1025_group_opt);
+       sysfs_remove_group(&client->dev.kobj, &adm1025_group_in4);
 
        if ((err = i2c_detach_client(client)))
                return err;