ARM: dts: imx6qdl-sabresd: Use GPIO_ACTIVE_HIGH for regulators

Passing GPIO_ACTIVE_HIGH as GPIO flags for the GPIO controlled
regulator improves the readability, so use it instead of the
hardcoded number.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 187548d..8930aec 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -22,7 +22,7 @@
                regulator-name = "usb_otg_vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
-               gpio = <&gpio3 22 0>;
+               gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
                enable-active-high;
                vin-supply = <&swbst_reg>;
        };
@@ -32,7 +32,7 @@
                regulator-name = "usb_h1_vbus";
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5000000>;
-               gpio = <&gpio1 29 0>;
+               gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>;
                enable-active-high;
                vin-supply = <&swbst_reg>;
        };
@@ -40,7 +40,7 @@
        reg_audio: regulator-audio {
                compatible = "regulator-fixed";
                regulator-name = "wm8962-supply";
-               gpio = <&gpio4 10 0>;
+               gpio = <&gpio4 10 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
@@ -51,7 +51,7 @@
                regulator-name = "MPCIE_3V3";
                regulator-min-microvolt = <3300000>;
                regulator-max-microvolt = <3300000>;
-               gpio = <&gpio3 19 0>;
+               gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };