}
}
seen_esc = 0;
- if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
- *tty->flip.char_buf_ptr = ch;
-
- *tty->flip.flag_buf_ptr = 0;
-
- tty->flip.flag_buf_ptr++;
- tty->flip.char_buf_ptr++;
- tty->flip.count++;
+ if (tty_insert_flip_char(tty, ch, TTY_NORMAL) == 0)
+ break;
}
tty_flip_buffer_push(tty);
}
data8 0
data8 0
data8 0
+ data8 0 // 1280
.org fsyscall_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
GLOBAL_ENTRY(jprobe_inst_return)
br.call.sptk.many b0=jprobe_break
END(jprobe_inst_return)
+
+GLOBAL_ENTRY(invalidate_stacked_regs)
+ movl r16=invalidate_restore_cfm
+ ;;
+ mov b6=r16
+ ;;
+ br.ret.sptk.many b6
+ ;;
+invalidate_restore_cfm:
+ mov r16=ar.rsc
+ ;;
+ mov ar.rsc=r0
+ ;;
+ loadrs
+ ;;
+ mov ar.rsc=r16
+ ;;
+ br.cond.sptk.many rp
+END(invalidate_stacked_regs)
+
+GLOBAL_ENTRY(flush_register_stack)
+ // flush dirty regs to backing store (must be first in insn group)
+ flushrs
+ ;;
+ br.ret.sptk.many rp
+END(flush_register_stack)
+
return ret;
}
+struct param_bsp_cfm {
+ unsigned long ip;
+ unsigned long *bsp;
+ unsigned long cfm;
+};
+
+static void ia64_get_bsp_cfm(struct unw_frame_info *info, void *arg)
+{
+ unsigned long ip;
+ struct param_bsp_cfm *lp = arg;
+
+ do {
+ unw_get_ip(info, &ip);
+ if (ip == 0)
+ break;
+ if (ip == lp->ip) {
+ unw_get_bsp(info, (unsigned long*)&lp->bsp);
+ unw_get_cfm(info, (unsigned long*)&lp->cfm);
+ return;
+ }
+ } while (unw_unwind(info) >= 0);
+ lp->bsp = 0;
+ lp->cfm = 0;
+ return;
+}
+
int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs)
{
struct jprobe *jp = container_of(p, struct jprobe, kp);
unsigned long addr = ((struct fnptr *)(jp->entry))->ip;
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ struct param_bsp_cfm pa;
+ int bytes;
+
+ /*
+ * Callee owns the argument space and could overwrite it, eg
+ * tail call optimization. So to be absolutely safe
+ * we save the argument space before transfering the control
+ * to instrumented jprobe function which runs in
+ * the process context
+ */
+ pa.ip = regs->cr_iip;
+ unw_init_running(ia64_get_bsp_cfm, &pa);
+ bytes = (char *)ia64_rse_skip_regs(pa.bsp, pa.cfm & 0x3f)
+ - (char *)pa.bsp;
+ memcpy( kcb->jprobes_saved_stacked_regs,
+ pa.bsp,
+ bytes );
+ kcb->bsp = pa.bsp;
+ kcb->cfm = pa.cfm;
/* save architectural state */
kcb->jprobe_saved_regs = *regs;
int __kprobes longjmp_break_handler(struct kprobe *p, struct pt_regs *regs)
{
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
+ int bytes;
+ /* restoring architectural state */
*regs = kcb->jprobe_saved_regs;
+
+ /* restoring the original argument space */
+ flush_register_stack();
+ bytes = (char *)ia64_rse_skip_regs(kcb->bsp, kcb->cfm & 0x3f)
+ - (char *)kcb->bsp;
+ memcpy( kcb->bsp,
+ kcb->jprobes_saved_stacked_regs,
+ bytes );
+ invalidate_stacked_regs();
+
preempt_enable_no_resched();
return 1;
}
;;
mov cr.iim=temp3
mov cr.iha=temp4
- dep r22=0,r22,62,2 // pal_min_state, physical, uncached
+ dep r22=0,r22,62,1 // pal_min_state, physical, uncached
mov IA64_KR(CURRENT)=r21
ld8 r8=[temp1] // os_status
ld8 r10=[temp2] // context
*
* Creates entries in /proc/sal for various system features.
*
- * Copyright (c) 2003 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (c) 2003, 2006 Silicon Graphics, Inc. All rights reserved.
* Copyright (c) 2003 Hewlett-Packard Co
* Bjorn Helgaas <bjorn.helgaas@hp.com>
*
* mca.c may not pass a buffer, a NULL buffer just indicates that a new
* record is available in SAL.
* Replace some NR_CPUS by cpus_online, for hotplug cpu.
+ *
+ * Jan 5 2006 kaos@sgi.com
+ * Handle hotplug cpus coming online.
+ * Handle hotplug cpus going offline while they still have outstanding records.
+ * Use the cpu_* macros consistently.
+ * Replace the counting semaphore with a mutex and a test if the cpumask is non-empty.
+ * Modify the locking to make the test for "work to do" an atomic operation.
*/
#include <linux/capability.h>
+#include <linux/cpu.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
};
struct salinfo_data {
- volatile cpumask_t cpu_event; /* which cpus have outstanding events */
- struct semaphore sem; /* count of cpus with outstanding events (bits set in cpu_event) */
+ cpumask_t cpu_event; /* which cpus have outstanding events */
+ struct semaphore mutex;
u8 *log_buffer;
u64 log_size;
u8 *oemdata; /* decoded oem data */
int ret;
};
+/* Kick the mutex that tells user space that there is work to do. Instead of
+ * trying to track the state of the mutex across multiple cpus, in user
+ * context, interrupt context, non-maskable interrupt context and hotplug cpu,
+ * it is far easier just to grab the mutex if it is free then release it.
+ *
+ * This routine must be called with data_saved_lock held, to make the down/up
+ * operation atomic.
+ */
+static void
+salinfo_work_to_do(struct salinfo_data *data)
+{
+ down_trylock(&data->mutex);
+ up(&data->mutex);
+}
+
static void
salinfo_platform_oemdata_cpu(void *context)
{
BUG_ON(type >= ARRAY_SIZE(salinfo_log_name));
+ if (irqsafe)
+ spin_lock_irqsave(&data_saved_lock, flags);
if (buffer) {
- if (irqsafe)
- spin_lock_irqsave(&data_saved_lock, flags);
for (i = 0, data_saved = data->data_saved; i < saved_size; ++i, ++data_saved) {
if (!data_saved->buffer)
break;
data_saved->size = size;
data_saved->buffer = buffer;
}
- if (irqsafe)
- spin_unlock_irqrestore(&data_saved_lock, flags);
}
-
- if (!test_and_set_bit(smp_processor_id(), &data->cpu_event)) {
- if (irqsafe)
- up(&data->sem);
+ cpu_set(smp_processor_id(), data->cpu_event);
+ if (irqsafe) {
+ salinfo_work_to_do(data);
+ spin_unlock_irqrestore(&data_saved_lock, flags);
}
}
static void
salinfo_timeout_check(struct salinfo_data *data)
{
- int i;
+ unsigned long flags;
if (!data->open)
return;
- for_each_online_cpu(i) {
- if (test_bit(i, &data->cpu_event)) {
- /* double up() is not a problem, user space will see no
- * records for the additional "events".
- */
- up(&data->sem);
- }
+ if (!cpus_empty(data->cpu_event)) {
+ spin_lock_irqsave(&data_saved_lock, flags);
+ salinfo_work_to_do(data);
+ spin_unlock_irqrestore(&data_saved_lock, flags);
}
}
-static void
+static void
salinfo_timeout (unsigned long arg)
{
salinfo_timeout_check(salinfo_data + SAL_INFO_TYPE_MCA);
int i, n, cpu = -1;
retry:
- if (down_trylock(&data->sem)) {
+ if (cpus_empty(data->cpu_event) && down_trylock(&data->mutex)) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
- if (down_interruptible(&data->sem))
+ if (down_interruptible(&data->mutex))
return -EINTR;
}
n = data->cpu_check;
for (i = 0; i < NR_CPUS; i++) {
- if (test_bit(n, &data->cpu_event) && cpu_online(n)) {
+ if (cpu_isset(n, data->cpu_event)) {
+ if (!cpu_online(n)) {
+ cpu_clear(n, data->cpu_event);
+ continue;
+ }
cpu = n;
break;
}
if (cpu == -1)
goto retry;
- /* events are sticky until the user says "clear" */
- up(&data->sem);
-
/* for next read, start checking at next CPU */
data->cpu_check = cpu;
if (++data->cpu_check == NR_CPUS)
static void
call_on_cpu(int cpu, void (*fn)(void *), void *arg)
{
- cpumask_t save_cpus_allowed, new_cpus_allowed;
- memcpy(&save_cpus_allowed, ¤t->cpus_allowed, sizeof(save_cpus_allowed));
- memset(&new_cpus_allowed, 0, sizeof(new_cpus_allowed));
- set_bit(cpu, &new_cpus_allowed);
+ cpumask_t save_cpus_allowed = current->cpus_allowed;
+ cpumask_t new_cpus_allowed = cpumask_of_cpu(cpu);
set_cpus_allowed(current, new_cpus_allowed);
(*fn)(arg);
set_cpus_allowed(current, save_cpus_allowed);
if (!data->saved_num)
call_on_cpu(cpu, salinfo_log_read_cpu, data);
if (!data->log_size) {
- data->state = STATE_NO_DATA;
- clear_bit(cpu, &data->cpu_event);
+ data->state = STATE_NO_DATA;
+ cpu_clear(cpu, data->cpu_event);
} else {
- data->state = STATE_LOG_RECORD;
+ data->state = STATE_LOG_RECORD;
}
}
salinfo_log_clear(struct salinfo_data *data, int cpu)
{
sal_log_record_header_t *rh;
+ unsigned long flags;
+ spin_lock_irqsave(&data_saved_lock, flags);
data->state = STATE_NO_DATA;
- if (!test_bit(cpu, &data->cpu_event))
+ if (!cpu_isset(cpu, data->cpu_event)) {
+ spin_unlock_irqrestore(&data_saved_lock, flags);
return 0;
- down(&data->sem);
- clear_bit(cpu, &data->cpu_event);
+ }
+ cpu_clear(cpu, data->cpu_event);
if (data->saved_num) {
- unsigned long flags;
- spin_lock_irqsave(&data_saved_lock, flags);
- shift1_data_saved(data, data->saved_num - 1 );
+ shift1_data_saved(data, data->saved_num - 1);
data->saved_num = 0;
- spin_unlock_irqrestore(&data_saved_lock, flags);
}
+ spin_unlock_irqrestore(&data_saved_lock, flags);
rh = (sal_log_record_header_t *)(data->log_buffer);
/* Corrected errors have already been cleared from SAL */
if (rh->severity != sal_log_severity_corrected)
call_on_cpu(cpu, salinfo_log_clear_cpu, data);
/* clearing a record may make a new record visible */
salinfo_log_new_read(cpu, data);
- if (data->state == STATE_LOG_RECORD &&
- !test_and_set_bit(cpu, &data->cpu_event))
- up(&data->sem);
+ if (data->state == STATE_LOG_RECORD) {
+ spin_lock_irqsave(&data_saved_lock, flags);
+ cpu_set(cpu, data->cpu_event);
+ salinfo_work_to_do(data);
+ spin_unlock_irqrestore(&data_saved_lock, flags);
+ }
return 0;
}
.write = salinfo_log_write,
};
+#ifdef CONFIG_HOTPLUG_CPU
+static int __devinit
+salinfo_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
+{
+ unsigned int i, cpu = (unsigned long)hcpu;
+ unsigned long flags;
+ struct salinfo_data *data;
+ switch (action) {
+ case CPU_ONLINE:
+ spin_lock_irqsave(&data_saved_lock, flags);
+ for (i = 0, data = salinfo_data;
+ i < ARRAY_SIZE(salinfo_data);
+ ++i, ++data) {
+ cpu_set(cpu, data->cpu_event);
+ salinfo_work_to_do(data);
+ }
+ spin_unlock_irqrestore(&data_saved_lock, flags);
+ break;
+ case CPU_DEAD:
+ spin_lock_irqsave(&data_saved_lock, flags);
+ for (i = 0, data = salinfo_data;
+ i < ARRAY_SIZE(salinfo_data);
+ ++i, ++data) {
+ struct salinfo_data_saved *data_saved;
+ int j;
+ for (j = ARRAY_SIZE(data->data_saved) - 1, data_saved = data->data_saved + j;
+ j >= 0;
+ --j, --data_saved) {
+ if (data_saved->buffer && data_saved->cpu == cpu) {
+ shift1_data_saved(data, j);
+ }
+ }
+ cpu_clear(cpu, data->cpu_event);
+ }
+ spin_unlock_irqrestore(&data_saved_lock, flags);
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block salinfo_cpu_notifier =
+{
+ .notifier_call = salinfo_cpu_callback,
+ .priority = 0,
+};
+#endif /* CONFIG_HOTPLUG_CPU */
+
static int __init
salinfo_init(void)
{
struct proc_dir_entry **sdir = salinfo_proc_entries; /* keeps track of every entry */
struct proc_dir_entry *dir, *entry;
struct salinfo_data *data;
- int i, j, online;
+ int i, j;
salinfo_dir = proc_mkdir("sal", NULL);
if (!salinfo_dir)
for (i = 0; i < ARRAY_SIZE(salinfo_log_name); i++) {
data = salinfo_data + i;
data->type = i;
- sema_init(&data->sem, 0);
+ init_MUTEX(&data->mutex);
dir = proc_mkdir(salinfo_log_name[i], salinfo_dir);
if (!dir)
continue;
*sdir++ = entry;
/* we missed any events before now */
- online = 0;
- for_each_online_cpu(j) {
- set_bit(j, &data->cpu_event);
- ++online;
- }
- sema_init(&data->sem, online);
+ for_each_online_cpu(j)
+ cpu_set(j, data->cpu_event);
*sdir++ = dir;
}
salinfo_timer.function = &salinfo_timeout;
add_timer(&salinfo_timer);
+#ifdef CONFIG_HOTPLUG_CPU
+ register_cpu_notifier(&salinfo_cpu_notifier);
+#endif
+
return 0;
}
if (fsys_mode(current, ®s)) {
extern char __kernel_syscall_via_break[];
/*
- * Got a trap in fsys-mode: Taken Branch Trap and Single Step trap
- * need special handling; Debug trap is not supposed to happen.
+ * Got a trap in fsys-mode: Taken Branch Trap
+ * and Single Step trap need special handling;
+ * Debug trap is ignored (we disable it here
+ * and re-enable it in the lower-privilege trap).
*/
if (unlikely(vector == 29)) {
- die("Got debug trap in fsys-mode---not supposed to happen!",
- ®s, 0);
+ set_thread_flag(TIF_DB_DISABLED);
+ ia64_psr(®s)->db = 0;
+ ia64_psr(®s)->lp = 1;
return;
}
/* re-do the system call via break 0x100000: */
case 34:
if (isr & 0x2) {
/* Lower-Privilege Transfer Trap */
+
+ /* If we disabled debug traps during an fsyscall,
+ * re-enable them here.
+ */
+ if (test_thread_flag(TIF_DB_DISABLED)) {
+ clear_thread_flag(TIF_DB_DISABLED);
+ ia64_psr(®s)->db = 1;
+ }
+
/*
- * Just clear PSR.lp and then return immediately: all the
- * interesting work (e.g., signal delivery is done in the kernel
- * exit path).
+ * Just clear PSR.lp and then return immediately:
+ * all the interesting work (e.g., signal delivery)
+ * is done in the kernel exit path.
*/
ia64_psr(®s)->lp = 0;
return;
{
static DEFINE_SPINLOCK(ptcg_lock);
- if (mm != current->active_mm) {
+ if (mm != current->active_mm || !current->mm) {
flush_tlb_all();
return;
}
#define IIO_NUM_ITTES 7
#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-struct sn_flush_device_list {
+/* This struct is shared between the PROM and the kernel.
+ * Changes to this struct will require corresponding changes to the kernel.
+ */
+struct sn_flush_device_common {
int sfdl_bus;
int sfdl_slot;
int sfdl_pin;
- struct bar_list {
+ struct common_bar_list {
unsigned long start;
unsigned long end;
} sfdl_bar_list[6];
uint32_t sfdl_persistent_busnum;
uint32_t sfdl_persistent_segment;
struct pcibus_info *sfdl_pcibus_info;
+};
+
+/* This struct is kernel only and is not used by the PROM */
+struct sn_flush_device_kernel {
spinlock_t sfdl_flush_lock;
+ struct sn_flush_device_common *common;
};
/*
- * **widget_p - Used as an array[wid_num][device] of sn_flush_device_list.
+ * **widget_p - Used as an array[wid_num][device] of sn_flush_device_kernel.
*/
struct sn_flush_nasid_entry {
- struct sn_flush_device_list **widget_p; /* Used as a array of wid_num */
+ struct sn_flush_device_kernel **widget_p; // Used as an array of wid_num
uint64_t iio_itte[8];
};
* Wait until all BTE related CRBs are completed
* and then reset the interfaces.
*/
-void shub1_bte_error_handler(unsigned long _nodepda)
+int shub1_bte_error_handler(unsigned long _nodepda)
{
struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda;
struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer;
(err_nodepda->bte_if[1].bh_error == BTE_SUCCESS)) {
BTE_PRINTK(("eh:%p:%d Nothing to do.\n", err_nodepda,
smp_processor_id()));
- return;
+ return 1;
}
/* Determine information about our hub */
mod_timer(recovery_timer, HZ * 5);
BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
smp_processor_id()));
- return;
+ return 1;
}
if (icmr.ii_icmr_fld_s.i_crb_vld != 0) {
BTE_PRINTK(("eh:%p:%d Valid %d, Giving up\n",
err_nodepda, smp_processor_id(),
i));
- return;
+ return 1;
}
}
}
REMOTE_HUB_S(nasid, IIO_IBCR, ibcr.ii_ibcr_regval);
del_timer(recovery_timer);
+ return 0;
+}
+
+/*
+ * Wait until all BTE related CRBs are completed
+ * and then reset the interfaces.
+ */
+int shub2_bte_error_handler(unsigned long _nodepda)
+{
+ struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda;
+ struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer;
+ struct bteinfo_s *bte;
+ nasid_t nasid;
+ u64 status;
+ int i;
+
+ nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode);
+
+ /*
+ * Verify that all the BTEs are complete
+ */
+ for (i = 0; i < BTES_PER_NODE; i++) {
+ bte = &err_nodepda->bte_if[i];
+ status = BTE_LNSTAT_LOAD(bte);
+ if ((status & IBLS_ERROR) || !(status & IBLS_BUSY))
+ continue;
+ mod_timer(recovery_timer, HZ * 5);
+ BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
+ smp_processor_id()));
+ return 1;
+ }
+ if (ia64_sn_bte_recovery(nasid))
+ panic("bte_error_handler(): Fatal BTE Error");
+
+ del_timer(recovery_timer);
+ return 0;
}
/*
struct nodepda_s *err_nodepda = (struct nodepda_s *)_nodepda;
spinlock_t *recovery_lock = &err_nodepda->bte_recovery_lock;
int i;
- nasid_t nasid;
unsigned long irq_flags;
volatile u64 *notify;
bte_result_t bh_error;
}
if (is_shub1()) {
- shub1_bte_error_handler(_nodepda);
+ if (shub1_bte_error_handler(_nodepda)) {
+ spin_unlock_irqrestore(recovery_lock, irq_flags);
+ return;
+ }
} else {
- nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode);
-
- if (ia64_sn_bte_recovery(nasid))
- panic("bte_error_handler(): Fatal BTE Error");
+ if (shub2_bte_error_handler(_nodepda)) {
+ spin_unlock_irqrestore(recovery_lock, irq_flags);
+ return;
+ }
}
for (i = 0; i < BTES_PER_NODE; i++) {
ret_stuff.v0 = 0;
hubdev_info = (struct hubdev_info *)arg;
nasid = hubdev_info->hdi_nasid;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
+
+ if (is_shub1()) {
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
(u64) nasid, 0, 0, 0, 0, 0, 0);
- if ((int)ret_stuff.v0)
- panic("hubii_eint_handler(): Fatal TIO Error");
+ if ((int)ret_stuff.v0)
+ panic("hubii_eint_handler(): Fatal TIO Error");
- if (is_shub1()) {
if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
(void)hubiio_crb_error_handler(hubdev_info);
} else
};
/*
- * Retrieve the DMA Flush List given nasid. This list is needed
- * to implement the WAR - Flush DMA data on PIO Reads.
+ * Retrieve the DMA Flush List given nasid, widget, and device.
+ * This list is needed to implement the WAR - Flush DMA data on PIO Reads.
*/
-static inline uint64_t
-sal_get_widget_dmaflush_list(u64 nasid, u64 widget_num, u64 address)
+static inline u64
+sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
+ u64 address)
{
struct ia64_sal_retval ret_stuff;
ret_stuff.v0 = 0;
SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST,
- (u64) nasid, (u64) widget_num, (u64) address, 0, 0, 0,
- 0);
- return ret_stuff.v0;
+ (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST,
+ (u64) nasid, (u64) widget_num,
+ (u64) device_num, (u64) address, 0, 0, 0);
+ return ret_stuff.status;
}
/*
* Retrieve the hub device info structure for the given nasid.
*/
-static inline uint64_t sal_get_hubdev_info(u64 handle, u64 address)
+static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
{
struct ia64_sal_retval ret_stuff;
/*
* Retrieve the pci bus information given the bus number.
*/
-static inline uint64_t sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
+static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
{
struct ia64_sal_retval ret_stuff;
/*
* Retrieve the pci device information given the bus and device|function number.
*/
-static inline uint64_t
+static inline u64
sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
u64 sn_irq_info)
{
*/
static void sn_fixup_ionodes(void)
{
-
- struct sn_flush_device_list *sn_flush_device_list;
+ struct sn_flush_device_kernel *sn_flush_device_kernel;
+ struct sn_flush_device_kernel *dev_entry;
struct hubdev_info *hubdev;
- uint64_t status;
- uint64_t nasid;
- int i, widget;
+ u64 status;
+ u64 nasid;
+ int i, widget, device;
/*
* Get SGI Specific HUB chipset information.
nasid = cnodeid_to_nasid(i);
hubdev->max_segment_number = 0xffffffff;
hubdev->max_pcibus_number = 0xff;
- status = sal_get_hubdev_info(nasid, (uint64_t) __pa(hubdev));
+ status = sal_get_hubdev_info(nasid, (u64) __pa(hubdev));
if (status)
continue;
hubdev->hdi_flush_nasid_list.widget_p =
kmalloc((HUB_WIDGET_ID_MAX + 1) *
- sizeof(struct sn_flush_device_list *), GFP_KERNEL);
-
+ sizeof(struct sn_flush_device_kernel *),
+ GFP_KERNEL);
memset(hubdev->hdi_flush_nasid_list.widget_p, 0x0,
(HUB_WIDGET_ID_MAX + 1) *
- sizeof(struct sn_flush_device_list *));
+ sizeof(struct sn_flush_device_kernel *));
for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
- sn_flush_device_list = kmalloc(DEV_PER_WIDGET *
- sizeof(struct
- sn_flush_device_list),
- GFP_KERNEL);
- memset(sn_flush_device_list, 0x0,
+ sn_flush_device_kernel = kmalloc(DEV_PER_WIDGET *
+ sizeof(struct
+ sn_flush_device_kernel),
+ GFP_KERNEL);
+ if (!sn_flush_device_kernel)
+ BUG();
+ memset(sn_flush_device_kernel, 0x0,
DEV_PER_WIDGET *
- sizeof(struct sn_flush_device_list));
-
- status =
- sal_get_widget_dmaflush_list(nasid, widget,
- (uint64_t)
- __pa
- (sn_flush_device_list));
- if (status) {
- kfree(sn_flush_device_list);
- continue;
+ sizeof(struct sn_flush_device_kernel));
+
+ dev_entry = sn_flush_device_kernel;
+ for (device = 0; device < DEV_PER_WIDGET;
+ device++,dev_entry++) {
+ dev_entry->common = kmalloc(sizeof(struct
+ sn_flush_device_common),
+ GFP_KERNEL);
+ if (!dev_entry->common)
+ BUG();
+ memset(dev_entry->common, 0x0, sizeof(struct
+ sn_flush_device_common));
+
+ status = sal_get_device_dmaflush_list(nasid,
+ widget,
+ device,
+ (u64)(dev_entry->common));
+ if (status)
+ BUG();
+
+ spin_lock_init(&dev_entry->sfdl_flush_lock);
}
- spin_lock_init(&sn_flush_device_list->sfdl_flush_lock);
- hubdev->hdi_flush_nasid_list.widget_p[widget] =
- sn_flush_device_list;
- }
-
+ if (sn_flush_device_kernel)
+ hubdev->hdi_flush_nasid_list.widget_p[widget] =
+ sn_flush_device_kernel;
+ }
}
-
}
/*
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-
-/*
- * Cross Partition Communication (XPC) structures and macros.
- */
-
-#ifndef _IA64_SN_KERNEL_XPC_H
-#define _IA64_SN_KERNEL_XPC_H
-
-
-#include <linux/config.h>
-#include <linux/interrupt.h>
-#include <linux/sysctl.h>
-#include <linux/device.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/mspec.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/xp.h>
-
-
-/*
- * XPC Version numbers consist of a major and minor number. XPC can always
- * talk to versions with same major #, and never talk to versions with a
- * different major #.
- */
-#define _XPC_VERSION(_maj, _min) (((_maj) << 4) | ((_min) & 0xf))
-#define XPC_VERSION_MAJOR(_v) ((_v) >> 4)
-#define XPC_VERSION_MINOR(_v) ((_v) & 0xf)
-
-
-/*
- * The next macros define word or bit representations for given
- * C-brick nasid in either the SAL provided bit array representing
- * nasids in the partition/machine or the AMO_t array used for
- * inter-partition initiation communications.
- *
- * For SN2 machines, C-Bricks are alway even numbered NASIDs. As
- * such, some space will be saved by insisting that nasid information
- * passed from SAL always be packed for C-Bricks and the
- * cross-partition interrupts use the same packing scheme.
- */
-#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2)
-#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1))
-#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
- (1UL << XPC_NASID_B_INDEX(_n)))
-#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
-
-#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
-#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
-
-/* define the process name of HB checker and the CPU it is pinned to */
-#define XPC_HB_CHECK_THREAD_NAME "xpc_hb"
-#define XPC_HB_CHECK_CPU 0
-
-/* define the process name of the discovery thread */
-#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery"
-
-
-/*
- * the reserved page
- *
- * SAL reserves one page of memory per partition for XPC. Though a full page
- * in length (16384 bytes), its starting address is not page aligned, but it
- * is cacheline aligned. The reserved page consists of the following:
- *
- * reserved page header
- *
- * The first cacheline of the reserved page contains the header
- * (struct xpc_rsvd_page). Before SAL initialization has completed,
- * SAL has set up the following fields of the reserved page header:
- * SAL_signature, SAL_version, partid, and nasids_size. The other
- * fields are set up by XPC. (xpc_rsvd_page points to the local
- * partition's reserved page.)
- *
- * part_nasids mask
- * mach_nasids mask
- *
- * SAL also sets up two bitmaps (or masks), one that reflects the actual
- * nasids in this partition (part_nasids), and the other that reflects
- * the actual nasids in the entire machine (mach_nasids). We're only
- * interested in the even numbered nasids (which contain the processors
- * and/or memory), so we only need half as many bits to represent the
- * nasids. The part_nasids mask is located starting at the first cacheline
- * following the reserved page header. The mach_nasids mask follows right
- * after the part_nasids mask. The size in bytes of each mask is reflected
- * by the reserved page header field 'nasids_size'. (Local partition's
- * mask pointers are xpc_part_nasids and xpc_mach_nasids.)
- *
- * vars
- * vars part
- *
- * Immediately following the mach_nasids mask are the XPC variables
- * required by other partitions. First are those that are generic to all
- * partitions (vars), followed on the next available cacheline by those
- * which are partition specific (vars part). These are setup by XPC.
- * (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
- *
- * Note: Until vars_pa is set, the partition XPC code has not been initialized.
- */
-struct xpc_rsvd_page {
- u64 SAL_signature; /* SAL: unique signature */
- u64 SAL_version; /* SAL: version */
- u8 partid; /* SAL: partition ID */
- u8 version;
- u8 pad1[6]; /* align to next u64 in cacheline */
- volatile u64 vars_pa;
- struct timespec stamp; /* time when reserved page was setup by XPC */
- u64 pad2[9]; /* align to last u64 in cacheline */
- u64 nasids_size; /* SAL: size of each nasid mask in bytes */
-};
-
-#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
-
-#define XPC_SUPPORTS_RP_STAMP(_version) \
- (_version >= _XPC_VERSION(1,1))
-
-/*
- * compare stamps - the return value is:
- *
- * < 0, if stamp1 < stamp2
- * = 0, if stamp1 == stamp2
- * > 0, if stamp1 > stamp2
- */
-static inline int
-xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
-{
- int ret;
-
-
- if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
- ret = stamp1->tv_nsec - stamp2->tv_nsec;
- }
- return ret;
-}
-
-
-/*
- * Define the structures by which XPC variables can be exported to other
- * partitions. (There are two: struct xpc_vars and struct xpc_vars_part)
- */
-
-/*
- * The following structure describes the partition generic variables
- * needed by other partitions in order to properly initialize.
- *
- * struct xpc_vars version number also applies to struct xpc_vars_part.
- * Changes to either structure and/or related functionality should be
- * reflected by incrementing either the major or minor version numbers
- * of struct xpc_vars.
- */
-struct xpc_vars {
- u8 version;
- u64 heartbeat;
- u64 heartbeating_to_mask;
- u64 heartbeat_offline; /* if 0, heartbeat should be changing */
- int act_nasid;
- int act_phys_cpuid;
- u64 vars_part_pa;
- u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
- AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
-};
-
-#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
-
-#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
- (_version >= _XPC_VERSION(3,1))
-
-
-static inline int
-xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
-{
- return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
-}
-
-static inline void
-xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
-{
- u64 old_mask, new_mask;
-
- do {
- old_mask = vars->heartbeating_to_mask;
- new_mask = (old_mask | (1UL << partid));
- } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
- old_mask);
-}
-
-static inline void
-xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
-{
- u64 old_mask, new_mask;
-
- do {
- old_mask = vars->heartbeating_to_mask;
- new_mask = (old_mask & ~(1UL << partid));
- } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
- old_mask);
-}
-
-
-/*
- * The AMOs page consists of a number of AMO variables which are divided into
- * four groups, The first two groups are used to identify an IRQ's sender.
- * These two groups consist of 64 and 128 AMO variables respectively. The last
- * two groups, consisting of just one AMO variable each, are used to identify
- * the remote partitions that are currently engaged (from the viewpoint of
- * the XPC running on the remote partition).
- */
-#define XPC_NOTIFY_IRQ_AMOS 0
-#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
-#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
-#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
-
-
-/*
- * The following structure describes the per partition specific variables.
- *
- * An array of these structures, one per partition, will be defined. As a
- * partition becomes active XPC will copy the array entry corresponding to
- * itself from that partition. It is desirable that the size of this
- * structure evenly divide into a cacheline, such that none of the entries
- * in this array crosses a cacheline boundary. As it is now, each entry
- * occupies half a cacheline.
- */
-struct xpc_vars_part {
- volatile u64 magic;
-
- u64 openclose_args_pa; /* physical address of open and close args */
- u64 GPs_pa; /* physical address of Get/Put values */
-
- u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */
- int IPI_nasid; /* nasid of where to send IPIs */
- int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */
-
- u8 nchannels; /* #of defined channels supported */
-
- u8 reserved[23]; /* pad to a full 64 bytes */
-};
-
-/*
- * The vars_part MAGIC numbers play a part in the first contact protocol.
- *
- * MAGIC1 indicates that the per partition specific variables for a remote
- * partition have been initialized by this partition.
- *
- * MAGIC2 indicates that this partition has pulled the remote partititions
- * per partition variables that pertain to this partition.
- */
-#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
-#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
-
-
-/* the reserved page sizes and offsets */
-
-#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
-#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
-
-#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
-#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
-#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
-
-
-/*
- * Functions registered by add_timer() or called by kernel_thread() only
- * allow for a single 64-bit argument. The following macros can be used to
- * pack and unpack two (32-bit, 16-bit or 8-bit) arguments into or out from
- * the passed argument.
- */
-#define XPC_PACK_ARGS(_arg1, _arg2) \
- ((((u64) _arg1) & 0xffffffff) | \
- ((((u64) _arg2) & 0xffffffff) << 32))
-
-#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff)
-#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff)
-
-
-
-/*
- * Define a Get/Put value pair (pointers) used with a message queue.
- */
-struct xpc_gp {
- volatile s64 get; /* Get value */
- volatile s64 put; /* Put value */
-};
-
-#define XPC_GP_SIZE \
- L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
-
-
-
-/*
- * Define a structure that contains arguments associated with opening and
- * closing a channel.
- */
-struct xpc_openclose_args {
- u16 reason; /* reason why channel is closing */
- u16 msg_size; /* sizeof each message entry */
- u16 remote_nentries; /* #of message entries in remote msg queue */
- u16 local_nentries; /* #of message entries in local msg queue */
- u64 local_msgqueue_pa; /* physical address of local message queue */
-};
-
-#define XPC_OPENCLOSE_ARGS_SIZE \
- L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
-
-
-
-/* struct xpc_msg flags */
-
-#define XPC_M_DONE 0x01 /* msg has been received/consumed */
-#define XPC_M_READY 0x02 /* msg is ready to be sent */
-#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */
-
-
-#define XPC_MSG_ADDRESS(_payload) \
- ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
-
-
-
-/*
- * Defines notify entry.
- *
- * This is used to notify a message's sender that their message was received
- * and consumed by the intended recipient.
- */
-struct xpc_notify {
- struct semaphore sema; /* notify semaphore */
- volatile u8 type; /* type of notification */
-
- /* the following two fields are only used if type == XPC_N_CALL */
- xpc_notify_func func; /* user's notify function */
- void *key; /* pointer to user's key */
-};
-
-/* struct xpc_notify type of notification */
-
-#define XPC_N_CALL 0x01 /* notify function provided by user */
-
-
-
-/*
- * Define the structure that manages all the stuff required by a channel. In
- * particular, they are used to manage the messages sent across the channel.
- *
- * This structure is private to a partition, and is NOT shared across the
- * partition boundary.
- *
- * There is an array of these structures for each remote partition. It is
- * allocated at the time a partition becomes active. The array contains one
- * of these structures for each potential channel connection to that partition.
- *
- * Each of these structures manages two message queues (circular buffers).
- * They are allocated at the time a channel connection is made. One of
- * these message queues (local_msgqueue) holds the locally created messages
- * that are destined for the remote partition. The other of these message
- * queues (remote_msgqueue) is a locally cached copy of the remote partition's
- * own local_msgqueue.
- *
- * The following is a description of the Get/Put pointers used to manage these
- * two message queues. Consider the local_msgqueue to be on one partition
- * and the remote_msgqueue to be its cached copy on another partition. A
- * description of what each of the lettered areas contains is included.
- *
- *
- * local_msgqueue remote_msgqueue
- *
- * |/////////| |/////////|
- * w_remote_GP.get --> +---------+ |/////////|
- * | F | |/////////|
- * remote_GP.get --> +---------+ +---------+ <-- local_GP->get
- * | | | |
- * | | | E |
- * | | | |
- * | | +---------+ <-- w_local_GP.get
- * | B | |/////////|
- * | | |////D////|
- * | | |/////////|
- * | | +---------+ <-- w_remote_GP.put
- * | | |////C////|
- * local_GP->put --> +---------+ +---------+ <-- remote_GP.put
- * | | |/////////|
- * | A | |/////////|
- * | | |/////////|
- * w_local_GP.put --> +---------+ |/////////|
- * |/////////| |/////////|
- *
- *
- * ( remote_GP.[get|put] are cached copies of the remote
- * partition's local_GP->[get|put], and thus their values can
- * lag behind their counterparts on the remote partition. )
- *
- *
- * A - Messages that have been allocated, but have not yet been sent to the
- * remote partition.
- *
- * B - Messages that have been sent, but have not yet been acknowledged by the
- * remote partition as having been received.
- *
- * C - Area that needs to be prepared for the copying of sent messages, by
- * the clearing of the message flags of any previously received messages.
- *
- * D - Area into which sent messages are to be copied from the remote
- * partition's local_msgqueue and then delivered to their intended
- * recipients. [ To allow for a multi-message copy, another pointer
- * (next_msg_to_pull) has been added to keep track of the next message
- * number needing to be copied (pulled). It chases after w_remote_GP.put.
- * Any messages lying between w_local_GP.get and next_msg_to_pull have
- * been copied and are ready to be delivered. ]
- *
- * E - Messages that have been copied and delivered, but have not yet been
- * acknowledged by the recipient as having been received.
- *
- * F - Messages that have been acknowledged, but XPC has not yet notified the
- * sender that the message was received by its intended recipient.
- * This is also an area that needs to be prepared for the allocating of
- * new messages, by the clearing of the message flags of the acknowledged
- * messages.
- */
-struct xpc_channel {
- partid_t partid; /* ID of remote partition connected */
- spinlock_t lock; /* lock for updating this structure */
- u32 flags; /* general flags */
-
- enum xpc_retval reason; /* reason why channel is disconnect'g */
- int reason_line; /* line# disconnect initiated from */
-
- u16 number; /* channel # */
-
- u16 msg_size; /* sizeof each msg entry */
- u16 local_nentries; /* #of msg entries in local msg queue */
- u16 remote_nentries; /* #of msg entries in remote msg queue*/
-
- void *local_msgqueue_base; /* base address of kmalloc'd space */
- struct xpc_msg *local_msgqueue; /* local message queue */
- void *remote_msgqueue_base; /* base address of kmalloc'd space */
- struct xpc_msg *remote_msgqueue;/* cached copy of remote partition's */
- /* local message queue */
- u64 remote_msgqueue_pa; /* phys addr of remote partition's */
- /* local message queue */
-
- atomic_t references; /* #of external references to queues */
-
- atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
- wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
-
- u8 delayed_IPI_flags; /* IPI flags received, but delayed */
- /* action until channel disconnected */
-
- /* queue of msg senders who want to be notified when msg received */
-
- atomic_t n_to_notify; /* #of msg senders to notify */
- struct xpc_notify *notify_queue;/* notify queue for messages sent */
-
- xpc_channel_func func; /* user's channel function */
- void *key; /* pointer to user's key */
-
- struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
- struct semaphore wdisconnect_sema; /* wait for channel disconnect */
-
- struct xpc_openclose_args *local_openclose_args; /* args passed on */
- /* opening or closing of channel */
-
- /* various flavors of local and remote Get/Put values */
-
- struct xpc_gp *local_GP; /* local Get/Put values */
- struct xpc_gp remote_GP; /* remote Get/Put values */
- struct xpc_gp w_local_GP; /* working local Get/Put values */
- struct xpc_gp w_remote_GP; /* working remote Get/Put values */
- s64 next_msg_to_pull; /* Put value of next msg to pull */
-
- /* kthread management related fields */
-
-// >>> rethink having kthreads_assigned_limit and kthreads_idle_limit; perhaps
-// >>> allow the assigned limit be unbounded and let the idle limit be dynamic
-// >>> dependent on activity over the last interval of time
- atomic_t kthreads_assigned; /* #of kthreads assigned to channel */
- u32 kthreads_assigned_limit; /* limit on #of kthreads assigned */
- atomic_t kthreads_idle; /* #of kthreads idle waiting for work */
- u32 kthreads_idle_limit; /* limit on #of kthreads idle */
- atomic_t kthreads_active; /* #of kthreads actively working */
- // >>> following field is temporary
- u32 kthreads_created; /* total #of kthreads created */
-
- wait_queue_head_t idle_wq; /* idle kthread wait queue */
-
-} ____cacheline_aligned;
-
-
-/* struct xpc_channel flags */
-
-#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
-
-#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
-#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
-#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
-#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
-
-#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
-#define XPC_C_CONNECTCALLOUT 0x00000040 /* channel connected callout made */
-#define XPC_C_CONNECTED 0x00000080 /* local channel is connected */
-#define XPC_C_CONNECTING 0x00000100 /* channel is being connected */
-
-#define XPC_C_RCLOSEREPLY 0x00000200 /* remote close channel reply */
-#define XPC_C_CLOSEREPLY 0x00000400 /* local close channel reply */
-#define XPC_C_RCLOSEREQUEST 0x00000800 /* remote close channel request */
-#define XPC_C_CLOSEREQUEST 0x00001000 /* local close channel request */
-
-#define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */
-#define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */
-#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */
-#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */
-
-
-
-/*
- * Manages channels on a partition basis. There is one of these structures
- * for each partition (a partition will never utilize the structure that
- * represents itself).
- */
-struct xpc_partition {
-
- /* XPC HB infrastructure */
-
- u8 remote_rp_version; /* version# of partition's rsvd pg */
- struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
- u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
- u64 remote_vars_pa; /* phys addr of partition's vars */
- u64 remote_vars_part_pa; /* phys addr of partition's vars part */
- u64 last_heartbeat; /* HB at last read */
- u64 remote_amos_page_pa; /* phys addr of partition's amos page */
- int remote_act_nasid; /* active part's act/deact nasid */
- int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */
- u32 act_IRQ_rcvd; /* IRQs since activation */
- spinlock_t act_lock; /* protect updating of act_state */
- u8 act_state; /* from XPC HB viewpoint */
- u8 remote_vars_version; /* version# of partition's vars */
- enum xpc_retval reason; /* reason partition is deactivating */
- int reason_line; /* line# deactivation initiated from */
- int reactivate_nasid; /* nasid in partition to reactivate */
-
- unsigned long disengage_request_timeout; /* timeout in jiffies */
- struct timer_list disengage_request_timer;
-
-
- /* XPC infrastructure referencing and teardown control */
-
- volatile u8 setup_state; /* infrastructure setup state */
- wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
- atomic_t references; /* #of references to infrastructure */
-
-
- /*
- * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
- * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
- * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
- * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
- */
-
-
- u8 nchannels; /* #of defined channels supported */
- atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
- atomic_t nchannels_engaged;/* #of channels engaged with remote part */
- struct xpc_channel *channels;/* array of channel structures */
-
- void *local_GPs_base; /* base address of kmalloc'd space */
- struct xpc_gp *local_GPs; /* local Get/Put values */
- void *remote_GPs_base; /* base address of kmalloc'd space */
- struct xpc_gp *remote_GPs;/* copy of remote partition's local Get/Put */
- /* values */
- u64 remote_GPs_pa; /* phys address of remote partition's local */
- /* Get/Put values */
-
-
- /* fields used to pass args when opening or closing a channel */
-
- void *local_openclose_args_base; /* base address of kmalloc'd space */
- struct xpc_openclose_args *local_openclose_args; /* local's args */
- void *remote_openclose_args_base; /* base address of kmalloc'd space */
- struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
- /* args */
- u64 remote_openclose_args_pa; /* phys addr of remote's args */
-
-
- /* IPI sending, receiving and handling related fields */
-
- int remote_IPI_nasid; /* nasid of where to send IPIs */
- int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */
- AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */
-
- AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */
- u64 local_IPI_amo; /* IPI amo flags yet to be handled */
- char IPI_owner[8]; /* IPI owner's name */
- struct timer_list dropped_IPI_timer; /* dropped IPI timer */
-
- spinlock_t IPI_lock; /* IPI handler lock */
-
-
- /* channel manager related fields */
-
- atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */
- wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */
-
-} ____cacheline_aligned;
-
-
-/* struct xpc_partition act_state values (for XPC HB) */
-
-#define XPC_P_INACTIVE 0x00 /* partition is not active */
-#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */
-#define XPC_P_ACTIVATING 0x02 /* activation thread started */
-#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */
-#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */
-
-
-#define XPC_DEACTIVATE_PARTITION(_p, _reason) \
- xpc_deactivate_partition(__LINE__, (_p), (_reason))
-
-
-/* struct xpc_partition setup_state values */
-
-#define XPC_P_UNSET 0x00 /* infrastructure was never setup */
-#define XPC_P_SETUP 0x01 /* infrastructure is setup */
-#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */
-#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
-
-
-
-/*
- * struct xpc_partition IPI_timer #of seconds to wait before checking for
- * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
- * after the IPI was received.
- */
-#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
-
-
-/* number of seconds to wait for other partitions to disengage */
-#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
-
-/* interval in seconds to print 'waiting disengagement' messages */
-#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
-
-
-#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
-
-
-
-/* found in xp_main.c */
-extern struct xpc_registration xpc_registrations[];
-
-
-/* found in xpc_main.c */
-extern struct device *xpc_part;
-extern struct device *xpc_chan;
-extern int xpc_disengage_request_timelimit;
-extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
-extern void xpc_dropped_IPI_check(struct xpc_partition *);
-extern void xpc_activate_partition(struct xpc_partition *);
-extern void xpc_activate_kthreads(struct xpc_channel *, int);
-extern void xpc_create_kthreads(struct xpc_channel *, int);
-extern void xpc_disconnect_wait(int);
-
-
-/* found in xpc_partition.c */
-extern int xpc_exiting;
-extern struct xpc_vars *xpc_vars;
-extern struct xpc_rsvd_page *xpc_rsvd_page;
-extern struct xpc_vars_part *xpc_vars_part;
-extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
-extern char xpc_remote_copy_buffer[];
-extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
-extern void xpc_allow_IPI_ops(void);
-extern void xpc_restrict_IPI_ops(void);
-extern int xpc_identify_act_IRQ_sender(void);
-extern int xpc_partition_disengaged(struct xpc_partition *);
-extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
-extern void xpc_mark_partition_inactive(struct xpc_partition *);
-extern void xpc_discovery(void);
-extern void xpc_check_remote_hb(void);
-extern void xpc_deactivate_partition(const int, struct xpc_partition *,
- enum xpc_retval);
-extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *);
-
-
-/* found in xpc_channel.c */
-extern void xpc_initiate_connect(int);
-extern void xpc_initiate_disconnect(int);
-extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **);
-extern enum xpc_retval xpc_initiate_send(partid_t, int, void *);
-extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *,
- xpc_notify_func, void *);
-extern void xpc_initiate_received(partid_t, int, void *);
-extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *);
-extern void xpc_process_channel_activity(struct xpc_partition *);
-extern void xpc_connected_callout(struct xpc_channel *);
-extern void xpc_deliver_msg(struct xpc_channel *);
-extern void xpc_disconnect_channel(const int, struct xpc_channel *,
- enum xpc_retval, unsigned long *);
-extern void xpc_disconnecting_callout(struct xpc_channel *);
-extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
-extern void xpc_teardown_infrastructure(struct xpc_partition *);
-
-
-
-static inline void
-xpc_wakeup_channel_mgr(struct xpc_partition *part)
-{
- if (atomic_inc_return(&part->channel_mgr_requests) == 1) {
- wake_up(&part->channel_mgr_wq);
- }
-}
-
-
-
-/*
- * These next two inlines are used to keep us from tearing down a channel's
- * msg queues while a thread may be referencing them.
- */
-static inline void
-xpc_msgqueue_ref(struct xpc_channel *ch)
-{
- atomic_inc(&ch->references);
-}
-
-static inline void
-xpc_msgqueue_deref(struct xpc_channel *ch)
-{
- s32 refs = atomic_dec_return(&ch->references);
-
- DBUG_ON(refs < 0);
- if (refs == 0) {
- xpc_wakeup_channel_mgr(&xpc_partitions[ch->partid]);
- }
-}
-
-
-
-#define XPC_DISCONNECT_CHANNEL(_ch, _reason, _irqflgs) \
- xpc_disconnect_channel(__LINE__, _ch, _reason, _irqflgs)
-
-
-/*
- * These two inlines are used to keep us from tearing down a partition's
- * setup infrastructure while a thread may be referencing it.
- */
-static inline void
-xpc_part_deref(struct xpc_partition *part)
-{
- s32 refs = atomic_dec_return(&part->references);
-
-
- DBUG_ON(refs < 0);
- if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) {
- wake_up(&part->teardown_wq);
- }
-}
-
-static inline int
-xpc_part_ref(struct xpc_partition *part)
-{
- int setup;
-
-
- atomic_inc(&part->references);
- setup = (part->setup_state == XPC_P_SETUP);
- if (!setup) {
- xpc_part_deref(part);
- }
- return setup;
-}
-
-
-
-/*
- * The following macro is to be used for the setting of the reason and
- * reason_line fields in both the struct xpc_channel and struct xpc_partition
- * structures.
- */
-#define XPC_SET_REASON(_p, _reason, _line) \
- { \
- (_p)->reason = _reason; \
- (_p)->reason_line = _line; \
- }
-
-
-
-/*
- * This next set of inlines are used to keep track of when a partition is
- * potentially engaged in accessing memory belonging to another partition.
- */
-
-static inline void
-xpc_mark_partition_engaged(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
- (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
-
-
- local_irq_save(irq_flags);
-
- /* set bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
- (1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable), xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_mark_partition_disengaged(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
- (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
-
-
- local_irq_save(irq_flags);
-
- /* clear bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
- ~(1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable), xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_request_partition_disengage(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
- (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-
- local_irq_save(irq_flags);
-
- /* set bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
- (1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable), xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline void
-xpc_cancel_partition_disengage_request(struct xpc_partition *part)
-{
- unsigned long irq_flags;
- AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
- (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
-
-
- local_irq_save(irq_flags);
-
- /* clear bit corresponding to our partid in remote partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
- ~(1UL << sn_partition_id));
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
- variable), xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-}
-
-static inline u64
-xpc_partition_engaged(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-
- /* return our partition's AMO variable ANDed with partid_mask */
- return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
- partid_mask);
-}
-
-static inline u64
-xpc_partition_disengage_requested(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-
- /* return our partition's AMO variable ANDed with partid_mask */
- return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
- partid_mask);
-}
-
-static inline void
-xpc_clear_partition_engaged(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
-
-
- /* clear bit(s) based on partid_mask in our partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
- ~partid_mask);
-}
-
-static inline void
-xpc_clear_partition_disengage_request(u64 partid_mask)
-{
- AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
-
-
- /* clear bit(s) based on partid_mask in our partition's AMO */
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
- ~partid_mask);
-}
-
-
-
-/*
- * The following set of macros and inlines are used for the sending and
- * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
- * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
- * the other that is associated with channel activity (SGI_XPC_NOTIFY).
- */
-
-static inline u64
-xpc_IPI_receive(AMO_t *amo)
-{
- return FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_CLEAR);
-}
-
-
-static inline enum xpc_retval
-xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
-{
- int ret = 0;
- unsigned long irq_flags;
-
-
- local_irq_save(irq_flags);
-
- FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, flag);
- sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
-
- /*
- * We must always use the nofault function regardless of whether we
- * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
- * didn't, we'd never know that the other partition is down and would
- * keep sending IPIs and AMOs to it until the heartbeat times out.
- */
- ret = xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
- xp_nofault_PIOR_target));
-
- local_irq_restore(irq_flags);
-
- return ((ret == 0) ? xpcSuccess : xpcPioReadError);
-}
-
-
-/*
- * IPIs associated with SGI_XPC_ACTIVATE IRQ.
- */
-
-/*
- * Flag the appropriate AMO variable and send an IPI to the specified node.
- */
-static inline void
-xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
- int to_phys_cpuid)
-{
- int w_index = XPC_NASID_W_INDEX(from_nasid);
- int b_index = XPC_NASID_B_INDEX(from_nasid);
- AMO_t *amos = (AMO_t *) __va(amos_page_pa +
- (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
-
-
- (void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
- to_phys_cpuid, SGI_XPC_ACTIVATE);
-}
-
-static inline void
-xpc_IPI_send_activate(struct xpc_vars *vars)
-{
- xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
- vars->act_nasid, vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_activated(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
- part->remote_act_nasid, part->remote_act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_reactivate(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
- xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
-}
-
-static inline void
-xpc_IPI_send_disengage(struct xpc_partition *part)
-{
- xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
- part->remote_act_nasid, part->remote_act_phys_cpuid);
-}
-
-
-/*
- * IPIs associated with SGI_XPC_NOTIFY IRQ.
- */
-
-/*
- * Send an IPI to the remote partition that is associated with the
- * specified channel.
- */
-#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
- xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
-
-static inline void
-xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
- unsigned long *irq_flags)
-{
- struct xpc_partition *part = &xpc_partitions[ch->partid];
- enum xpc_retval ret;
-
-
- if (likely(part->act_state != XPC_P_DEACTIVATING)) {
- ret = xpc_IPI_send(part->remote_IPI_amo_va,
- (u64) ipi_flag << (ch->number * 8),
- part->remote_IPI_nasid,
- part->remote_IPI_phys_cpuid,
- SGI_XPC_NOTIFY);
- dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
- ipi_flag_string, ch->partid, ch->number, ret);
- if (unlikely(ret != xpcSuccess)) {
- if (irq_flags != NULL) {
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- }
- XPC_DEACTIVATE_PARTITION(part, ret);
- if (irq_flags != NULL) {
- spin_lock_irqsave(&ch->lock, *irq_flags);
- }
- }
- }
-}
-
-
-/*
- * Make it look like the remote partition, which is associated with the
- * specified channel, sent us an IPI. This faked IPI will be handled
- * by xpc_dropped_IPI_check().
- */
-#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
- xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
-
-static inline void
-xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
- char *ipi_flag_string)
-{
- struct xpc_partition *part = &xpc_partitions[ch->partid];
-
-
- FETCHOP_STORE_OP(TO_AMO((u64) &part->local_IPI_amo_va->variable),
- FETCHOP_OR, ((u64) ipi_flag << (ch->number * 8)));
- dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
- ipi_flag_string, ch->partid, ch->number);
-}
-
-
-/*
- * The sending and receiving of IPIs includes the setting of an AMO variable
- * to indicate the reason the IPI was sent. The 64-bit variable is divided
- * up into eight bytes, ordered from right to left. Byte zero pertains to
- * channel 0, byte one to channel 1, and so on. Each byte is described by
- * the following IPI flags.
- */
-
-#define XPC_IPI_CLOSEREQUEST 0x01
-#define XPC_IPI_CLOSEREPLY 0x02
-#define XPC_IPI_OPENREQUEST 0x04
-#define XPC_IPI_OPENREPLY 0x08
-#define XPC_IPI_MSGREQUEST 0x10
-
-
-/* given an AMO variable and a channel#, get its associated IPI flags */
-#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
-#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
-
-#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
-#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010)
-
-
-static inline void
-xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
-
- args->reason = ch->reason;
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
-
- args->msg_size = ch->msg_size;
- args->local_nentries = ch->local_nentries;
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
-{
- struct xpc_openclose_args *args = ch->local_openclose_args;
-
-
- args->remote_nentries = ch->remote_nentries;
- args->local_nentries = ch->local_nentries;
- args->local_msgqueue_pa = __pa(ch->local_msgqueue);
-
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
-}
-
-static inline void
-xpc_IPI_send_msgrequest(struct xpc_channel *ch)
-{
- XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
-}
-
-static inline void
-xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
-{
- XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
-}
-
-
-/*
- * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
- * pages are located in the lowest granule. The lowest granule uses 4k pages
- * for cached references and an alternate TLB handler to never provide a
- * cacheable mapping for the entire region. This will prevent speculative
- * reading of cached copies of our lines from being issued which will cause
- * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
- * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
- * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
- * activation and 2 AMO variables for partition deactivation.
- */
-static inline AMO_t *
-xpc_IPI_init(int index)
-{
- AMO_t *amo = xpc_vars->amos_page + index;
-
-
- (void) xpc_IPI_receive(amo); /* clear AMO variable */
- return amo;
-}
-
-
-
-static inline enum xpc_retval
-xpc_map_bte_errors(bte_result_t error)
-{
- switch (error) {
- case BTE_SUCCESS: return xpcSuccess;
- case BTEFAIL_DIR: return xpcBteDirectoryError;
- case BTEFAIL_POISON: return xpcBtePoisonError;
- case BTEFAIL_WERR: return xpcBteWriteError;
- case BTEFAIL_ACCESS: return xpcBteAccessError;
- case BTEFAIL_PWERR: return xpcBtePWriteError;
- case BTEFAIL_PRERR: return xpcBtePReadError;
- case BTEFAIL_TOUT: return xpcBteTimeOutError;
- case BTEFAIL_XTERR: return xpcBteXtalkError;
- case BTEFAIL_NOTAVAIL: return xpcBteNotAvailable;
- default: return xpcBteUnmappedError;
- }
-}
-
-
-
-static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
-{
- /* see if kmalloc will give us cachline aligned memory by default */
- *base = kmalloc(size, flags);
- if (*base == NULL) {
- return NULL;
- }
- if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
- return *base;
- }
- kfree(*base);
-
- /* nope, we'll have to do it ourselves */
- *base = kmalloc(size + L1_CACHE_BYTES, flags);
- if (*base == NULL) {
- return NULL;
- }
- return (void *) L1_CACHE_ALIGN((u64) *base);
-}
-
-
-/*
- * Check to see if there is any channel activity to/from the specified
- * partition.
- */
-static inline void
-xpc_check_for_channel_activity(struct xpc_partition *part)
-{
- u64 IPI_amo;
- unsigned long irq_flags;
-
-
- IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
- if (IPI_amo == 0) {
- return;
- }
-
- spin_lock_irqsave(&part->IPI_lock, irq_flags);
- part->local_IPI_amo |= IPI_amo;
- spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
-
- dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
- XPC_PARTID(part), IPI_amo);
-
- xpc_wakeup_channel_mgr(part);
-}
-
-
-#endif /* _IA64_SN_KERNEL_XPC_H */
-
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <linux/slab.h>
#include <asm/sn/bte.h>
#include <asm/sn/sn_sal.h>
-#include "xpc.h"
+#include <asm/sn/xpc.h>
/*
/* both sides are disconnected now */
+ if (ch->flags & XPC_C_CONNECTCALLOUT) {
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+ xpc_disconnect_callout(ch, xpcDisconnected);
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+ }
+
/* it's now safe to free the channel's message queues */
xpc_free_msgqueues(ch);
void
-xpc_disconnecting_callout(struct xpc_channel *ch)
+xpc_disconnect_callout(struct xpc_channel *ch, enum xpc_retval reason)
{
/*
* Let the channel's registerer know that the channel is being
*/
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, reason=xpcDisconnecting,"
- " partid=%d, channel=%d\n", ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() called, reason=%d, partid=%d, "
+ "channel=%d\n", reason, ch->partid, ch->number);
- ch->func(xpcDisconnecting, ch->partid, ch->number, NULL,
- ch->key);
+ ch->func(reason, ch->partid, ch->number, NULL, ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, reason="
- "xpcDisconnecting, partid=%d, channel=%d\n",
- ch->partid, ch->number);
+ dev_dbg(xpc_chan, "ch->func() returned, reason=%d, partid=%d, "
+ "channel=%d\n", reason, ch->partid, ch->number);
}
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <asm/sn/sn_sal.h>
#include <asm/kdebug.h>
#include <asm/uaccess.h>
-#include "xpc.h"
+#include <asm/sn/xpc.h>
/* define two XPC debug device structures to be used with dev_dbg() et al */
struct device *xpc_chan = &xpc_chan_dbg_subname;
+static int xpc_kdebug_ignore;
+
+
/* systune related variables for /proc/sys directories */
static int xpc_hb_interval = XPC_HB_DEFAULT_INTERVAL;
};
static struct ctl_table_header *xpc_sysctl;
+/* non-zero if any remote partition disengage request was timed out */
+int xpc_disengage_request_timedout;
/* #of IRQs received */
static atomic_t xpc_act_IRQ_rcvd;
ch->flags |= XPC_C_DISCONNECTCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
- xpc_disconnecting_callout(ch);
+ xpc_disconnect_callout(ch, xpcDisconnecting);
} else {
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
xpc_do_exit(enum xpc_retval reason)
{
partid_t partid;
- int active_part_count;
+ int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
- unsigned long printmsg_time;
+ unsigned long printmsg_time, disengage_request_timeout = 0;
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
/* wait for all partitions to become inactive */
- printmsg_time = jiffies;
+ printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ xpc_disengage_request_timedout = 0;
do {
active_part_count = 0;
active_part_count++;
XPC_DEACTIVATE_PARTITION(part, reason);
- }
- if (active_part_count == 0) {
- break;
+ if (part->disengage_request_timeout >
+ disengage_request_timeout) {
+ disengage_request_timeout =
+ part->disengage_request_timeout;
+ }
}
- if (jiffies >= printmsg_time) {
- dev_info(xpc_part, "waiting for partitions to "
- "deactivate/disengage, active count=%d, remote "
- "engaged=0x%lx\n", active_part_count,
- xpc_partition_engaged(1UL << partid));
-
- printmsg_time = jiffies +
+ if (xpc_partition_engaged(-1UL)) {
+ if (time_after(jiffies, printmsg_time)) {
+ dev_info(xpc_part, "waiting for remote "
+ "partitions to disengage, timeout in "
+ "%ld seconds\n",
+ (disengage_request_timeout - jiffies)
+ / HZ);
+ printmsg_time = jiffies +
(XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ printed_waiting_msg = 1;
+ }
+
+ } else if (active_part_count > 0) {
+ if (printed_waiting_msg) {
+ dev_info(xpc_part, "waiting for local partition"
+ " to disengage\n");
+ printed_waiting_msg = 0;
+ }
+
+ } else {
+ if (!xpc_disengage_request_timedout) {
+ dev_info(xpc_part, "all partitions have "
+ "disengaged\n");
+ }
+ break;
}
/* sleep for a 1/3 of a second or so */
del_timer_sync(&xpc_hb_timer);
DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
- /* take ourselves off of the reboot_notifier_list */
- (void) unregister_reboot_notifier(&xpc_reboot_notifier);
+ if (reason == xpcUnloading) {
+ /* take ourselves off of the reboot_notifier_list */
+ (void) unregister_reboot_notifier(&xpc_reboot_notifier);
- /* take ourselves off of the die_notifier list */
- (void) unregister_die_notifier(&xpc_die_notifier);
+ /* take ourselves off of the die_notifier list */
+ (void) unregister_die_notifier(&xpc_die_notifier);
+ }
/* close down protections for IPI operations */
xpc_restrict_IPI_ops();
/*
- * Called when the system is about to be either restarted or halted.
+ * This function is called when the system is being rebooted.
+ */
+static int
+xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
+{
+ enum xpc_retval reason;
+
+
+ switch (event) {
+ case SYS_RESTART:
+ reason = xpcSystemReboot;
+ break;
+ case SYS_HALT:
+ reason = xpcSystemHalt;
+ break;
+ case SYS_POWER_OFF:
+ reason = xpcSystemPoweroff;
+ break;
+ default:
+ reason = xpcSystemGoingDown;
+ }
+
+ xpc_do_exit(reason);
+ return NOTIFY_DONE;
+}
+
+
+/*
+ * Notify other partitions to disengage from all references to our memory.
*/
static void
xpc_die_disengage(void)
struct xpc_partition *part;
partid_t partid;
unsigned long engaged;
- long time, print_time, disengage_request_timeout;
+ long time, printmsg_time, disengage_request_timeout;
/* keep xpc_hb_checker thread from doing anything (just in case) */
}
}
- print_time = rtc_time();
- disengage_request_timeout = print_time +
+ time = rtc_time();
+ printmsg_time = time +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
+ disengage_request_timeout = time +
(xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
/* wait for all other partitions to disengage from us */
- while ((engaged = xpc_partition_engaged(-1UL)) &&
- (time = rtc_time()) < disengage_request_timeout) {
+ while (1) {
+ engaged = xpc_partition_engaged(-1UL);
+ if (!engaged) {
+ dev_info(xpc_part, "all partitions have disengaged\n");
+ break;
+ }
- if (time >= print_time) {
+ time = rtc_time();
+ if (time >= disengage_request_timeout) {
+ for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ if (engaged & (1UL << partid)) {
+ dev_info(xpc_part, "disengage from "
+ "remote partition %d timed "
+ "out\n", partid);
+ }
+ }
+ break;
+ }
+
+ if (time >= printmsg_time) {
dev_info(xpc_part, "waiting for remote partitions to "
- "disengage, engaged=0x%lx\n", engaged);
- print_time = time + (XPC_DISENGAGE_PRINTMSG_INTERVAL *
+ "disengage, timeout in %ld seconds\n",
+ (disengage_request_timeout - time) /
+ sn_rtc_cycles_per_second);
+ printmsg_time = time +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL *
sn_rtc_cycles_per_second);
}
}
- dev_info(xpc_part, "finished waiting for remote partitions to "
- "disengage, engaged=0x%lx\n", engaged);
-}
-
-
-/*
- * This function is called when the system is being rebooted.
- */
-static int
-xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
-{
- enum xpc_retval reason;
-
-
- switch (event) {
- case SYS_RESTART:
- reason = xpcSystemReboot;
- break;
- case SYS_HALT:
- reason = xpcSystemHalt;
- break;
- case SYS_POWER_OFF:
- reason = xpcSystemPoweroff;
- break;
- default:
- reason = xpcSystemGoingDown;
- }
-
- xpc_do_exit(reason);
- return NOTIFY_DONE;
}
/*
- * This function is called when the system is being rebooted.
+ * This function is called when the system is being restarted or halted due
+ * to some sort of system failure. If this is the case we need to notify the
+ * other partitions to disengage from all references to our memory.
+ * This function can also be called when our heartbeater could be offlined
+ * for a time. In this case we need to notify other partitions to not worry
+ * about the lack of a heartbeat.
*/
static int
xpc_system_die(struct notifier_block *nb, unsigned long event, void *unused)
case DIE_MACHINE_HALT:
xpc_die_disengage();
break;
+
+ case DIE_KDEBUG_ENTER:
+ /* Should lack of heartbeat be ignored by other partitions? */
+ if (!xpc_kdebug_ignore) {
+ break;
+ }
+ /* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
xpc_vars->heartbeat++;
xpc_vars->heartbeat_offline = 1;
break;
+
+ case DIE_KDEBUG_LEAVE:
+ /* Is lack of heartbeat being ignored by other partitions? */
+ if (!xpc_kdebug_ignore) {
+ break;
+ }
+ /* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
xpc_vars->heartbeat++;
MODULE_PARM_DESC(xpc_disengage_request_timelimit, "Number of seconds to wait "
"for disengage request to complete.");
+module_param(xpc_kdebug_ignore, int, 0);
+MODULE_PARM_DESC(xpc_kdebug_ignore, "Should lack of heartbeat be ignored by "
+ "other partitions when dropping into kdebug.");
+
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2005 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
*/
#include <asm/sn/sn_sal.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/addrs.h>
-#include "xpc.h"
+#include <asm/sn/xpc.h>
/* XPC is exiting flag */
}
}
- if (!xpc_partition_disengaged(part)) {
+ if (part->disengage_request_timeout > 0 &&
+ !xpc_partition_disengaged(part)) {
/* still waiting on other side to disengage from us */
return;
}
* request in a timely fashion, so assume it's dead.
*/
+ dev_info(xpc_part, "disengage from remote partition %d "
+ "timed out\n", partid);
+ xpc_disengage_request_timedout = 1;
xpc_clear_partition_engaged(1UL << partid);
disengaged = 1;
}
uint64_t flags;
uint64_t itte;
struct hubdev_info *hubinfo;
- volatile struct sn_flush_device_list *p;
+ volatile struct sn_flush_device_kernel *p;
+ volatile struct sn_flush_device_common *common;
+
struct sn_flush_nasid_entry *flush_nasid_list;
if (!sn_ioif_inited)
p = &flush_nasid_list->widget_p[wid_num][0];
/* find a matching BAR */
- for (i = 0; i < DEV_PER_WIDGET; i++) {
+ for (i = 0; i < DEV_PER_WIDGET; i++,p++) {
+ common = p->common;
for (j = 0; j < PCI_ROM_RESOURCE; j++) {
- if (p->sfdl_bar_list[j].start == 0)
+ if (common->sfdl_bar_list[j].start == 0)
break;
- if (addr >= p->sfdl_bar_list[j].start
- && addr <= p->sfdl_bar_list[j].end)
+ if (addr >= common->sfdl_bar_list[j].start
+ && addr <= common->sfdl_bar_list[j].end)
break;
}
- if (j < PCI_ROM_RESOURCE && p->sfdl_bar_list[j].start != 0)
+ if (j < PCI_ROM_RESOURCE && common->sfdl_bar_list[j].start != 0)
break;
- p++;
}
/* if no matching BAR, return without doing anything. */
if ((1 << XWIDGET_PART_REV_NUM_REV(revnum)) & PV907516) {
return;
} else {
- pcireg_wrb_flush_get(p->sfdl_pcibus_info,
- (p->sfdl_slot - 1));
+ pcireg_wrb_flush_get(common->sfdl_pcibus_info,
+ (common->sfdl_slot - 1));
}
} else {
- spin_lock_irqsave(&((struct sn_flush_device_list *)p)->
- sfdl_flush_lock, flags);
-
- *p->sfdl_flush_addr = 0;
+ spin_lock_irqsave((spinlock_t *)&p->sfdl_flush_lock,
+ flags);
+ *common->sfdl_flush_addr = 0;
/* force an interrupt. */
- *(volatile uint32_t *)(p->sfdl_force_int_addr) = 1;
+ *(volatile uint32_t *)(common->sfdl_force_int_addr) = 1;
/* wait for the interrupt to come back. */
- while (*(p->sfdl_flush_addr) != 0x10f)
+ while (*(common->sfdl_flush_addr) != 0x10f)
cpu_relax();
/* okay, everything is synched up. */
- spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock, flags);
+ spin_unlock_irqrestore((spinlock_t *)&p->sfdl_flush_lock,
+ flags);
}
return;
}
cnodeid_t near_cnode;
struct hubdev_info *hubdev_info;
struct pcibus_info *soft;
- struct sn_flush_device_list *sn_flush_device_list;
+ struct sn_flush_device_kernel *sn_flush_device_kernel;
+ struct sn_flush_device_common *common;
if (! IS_PCI_BRIDGE_ASIC(prom_bussoft->bs_asic_type)) {
return NULL;
hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
if (hubdev_info->hdi_flush_nasid_list.widget_p) {
- sn_flush_device_list = hubdev_info->hdi_flush_nasid_list.
+ sn_flush_device_kernel = hubdev_info->hdi_flush_nasid_list.
widget_p[(int)soft->pbi_buscommon.bs_xid];
- if (sn_flush_device_list) {
+ if (sn_flush_device_kernel) {
for (j = 0; j < DEV_PER_WIDGET;
- j++, sn_flush_device_list++) {
- if (sn_flush_device_list->sfdl_slot == -1)
+ j++, sn_flush_device_kernel++) {
+ common = sn_flush_device_kernel->common;
+ if (common->sfdl_slot == -1)
continue;
- if ((sn_flush_device_list->
- sfdl_persistent_segment ==
+ if ((common->sfdl_persistent_segment ==
soft->pbi_buscommon.bs_persist_segment) &&
- (sn_flush_device_list->
- sfdl_persistent_busnum ==
+ (common->sfdl_persistent_busnum ==
soft->pbi_buscommon.bs_persist_busnum))
- sn_flush_device_list->sfdl_pcibus_info =
+ common->sfdl_pcibus_info =
soft;
}
}
unsigned long status;
};
+#define MAX_PARAM_RSE_SIZE (0x60+0x60/0x3f)
/* per-cpu kprobe control block */
struct kprobe_ctlblk {
unsigned long kprobe_status;
struct pt_regs jprobe_saved_regs;
+ unsigned long jprobes_saved_stacked_regs[MAX_PARAM_RSE_SIZE];
+ unsigned long *bsp;
+ unsigned long cfm;
struct prev_kprobe prev_kprobe;
};
static inline void jprobe_return(void)
{
}
+extern void invalidate_stacked_regs(void);
+extern void flush_register_stack(void);
#endif /* _ASM_KPROBES_H */
#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056
#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057
-#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058
+#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated
+#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a
#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060
#define SN_SAL_BTE_RECOVER 0x02000061
struct ia64_sal_retval rv;
rv.status = 0;
- SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, 0, 0, 0, 0, 0, 0, 0);
+ SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
if (rv.status == SALRET_NOT_IMPLEMENTED)
return 0;
return (int) rv.status;
xpcOpenCloseError, /* 50: channel open/close protocol error */
- xpcUnknownReason /* 51: unknown reason -- must be last in list */
+ xpcDisconnected, /* 51: channel disconnected (closed) */
+
+ xpcUnknownReason /* 52: unknown reason -- must be last in list */
};
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2004-2006 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+
+/*
+ * Cross Partition Communication (XPC) structures and macros.
+ */
+
+#ifndef _ASM_IA64_SN_XPC_H
+#define _ASM_IA64_SN_XPC_H
+
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+#include <linux/sysctl.h>
+#include <linux/device.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/sn/bte.h>
+#include <asm/sn/clksupport.h>
+#include <asm/sn/addrs.h>
+#include <asm/sn/mspec.h>
+#include <asm/sn/shub_mmr.h>
+#include <asm/sn/xp.h>
+
+
+/*
+ * XPC Version numbers consist of a major and minor number. XPC can always
+ * talk to versions with same major #, and never talk to versions with a
+ * different major #.
+ */
+#define _XPC_VERSION(_maj, _min) (((_maj) << 4) | ((_min) & 0xf))
+#define XPC_VERSION_MAJOR(_v) ((_v) >> 4)
+#define XPC_VERSION_MINOR(_v) ((_v) & 0xf)
+
+
+/*
+ * The next macros define word or bit representations for given
+ * C-brick nasid in either the SAL provided bit array representing
+ * nasids in the partition/machine or the AMO_t array used for
+ * inter-partition initiation communications.
+ *
+ * For SN2 machines, C-Bricks are alway even numbered NASIDs. As
+ * such, some space will be saved by insisting that nasid information
+ * passed from SAL always be packed for C-Bricks and the
+ * cross-partition interrupts use the same packing scheme.
+ */
+#define XPC_NASID_W_INDEX(_n) (((_n) / 64) / 2)
+#define XPC_NASID_B_INDEX(_n) (((_n) / 2) & (64 - 1))
+#define XPC_NASID_IN_ARRAY(_n, _p) ((_p)[XPC_NASID_W_INDEX(_n)] & \
+ (1UL << XPC_NASID_B_INDEX(_n)))
+#define XPC_NASID_FROM_W_B(_w, _b) (((_w) * 64 + (_b)) * 2)
+
+#define XPC_HB_DEFAULT_INTERVAL 5 /* incr HB every x secs */
+#define XPC_HB_CHECK_DEFAULT_INTERVAL 20 /* check HB every x secs */
+
+/* define the process name of HB checker and the CPU it is pinned to */
+#define XPC_HB_CHECK_THREAD_NAME "xpc_hb"
+#define XPC_HB_CHECK_CPU 0
+
+/* define the process name of the discovery thread */
+#define XPC_DISCOVERY_THREAD_NAME "xpc_discovery"
+
+
+/*
+ * the reserved page
+ *
+ * SAL reserves one page of memory per partition for XPC. Though a full page
+ * in length (16384 bytes), its starting address is not page aligned, but it
+ * is cacheline aligned. The reserved page consists of the following:
+ *
+ * reserved page header
+ *
+ * The first cacheline of the reserved page contains the header
+ * (struct xpc_rsvd_page). Before SAL initialization has completed,
+ * SAL has set up the following fields of the reserved page header:
+ * SAL_signature, SAL_version, partid, and nasids_size. The other
+ * fields are set up by XPC. (xpc_rsvd_page points to the local
+ * partition's reserved page.)
+ *
+ * part_nasids mask
+ * mach_nasids mask
+ *
+ * SAL also sets up two bitmaps (or masks), one that reflects the actual
+ * nasids in this partition (part_nasids), and the other that reflects
+ * the actual nasids in the entire machine (mach_nasids). We're only
+ * interested in the even numbered nasids (which contain the processors
+ * and/or memory), so we only need half as many bits to represent the
+ * nasids. The part_nasids mask is located starting at the first cacheline
+ * following the reserved page header. The mach_nasids mask follows right
+ * after the part_nasids mask. The size in bytes of each mask is reflected
+ * by the reserved page header field 'nasids_size'. (Local partition's
+ * mask pointers are xpc_part_nasids and xpc_mach_nasids.)
+ *
+ * vars
+ * vars part
+ *
+ * Immediately following the mach_nasids mask are the XPC variables
+ * required by other partitions. First are those that are generic to all
+ * partitions (vars), followed on the next available cacheline by those
+ * which are partition specific (vars part). These are setup by XPC.
+ * (Local partition's vars pointers are xpc_vars and xpc_vars_part.)
+ *
+ * Note: Until vars_pa is set, the partition XPC code has not been initialized.
+ */
+struct xpc_rsvd_page {
+ u64 SAL_signature; /* SAL: unique signature */
+ u64 SAL_version; /* SAL: version */
+ u8 partid; /* SAL: partition ID */
+ u8 version;
+ u8 pad1[6]; /* align to next u64 in cacheline */
+ volatile u64 vars_pa;
+ struct timespec stamp; /* time when reserved page was setup by XPC */
+ u64 pad2[9]; /* align to last u64 in cacheline */
+ u64 nasids_size; /* SAL: size of each nasid mask in bytes */
+};
+
+#define XPC_RP_VERSION _XPC_VERSION(1,1) /* version 1.1 of the reserved page */
+
+#define XPC_SUPPORTS_RP_STAMP(_version) \
+ (_version >= _XPC_VERSION(1,1))
+
+/*
+ * compare stamps - the return value is:
+ *
+ * < 0, if stamp1 < stamp2
+ * = 0, if stamp1 == stamp2
+ * > 0, if stamp1 > stamp2
+ */
+static inline int
+xpc_compare_stamps(struct timespec *stamp1, struct timespec *stamp2)
+{
+ int ret;
+
+
+ if ((ret = stamp1->tv_sec - stamp2->tv_sec) == 0) {
+ ret = stamp1->tv_nsec - stamp2->tv_nsec;
+ }
+ return ret;
+}
+
+
+/*
+ * Define the structures by which XPC variables can be exported to other
+ * partitions. (There are two: struct xpc_vars and struct xpc_vars_part)
+ */
+
+/*
+ * The following structure describes the partition generic variables
+ * needed by other partitions in order to properly initialize.
+ *
+ * struct xpc_vars version number also applies to struct xpc_vars_part.
+ * Changes to either structure and/or related functionality should be
+ * reflected by incrementing either the major or minor version numbers
+ * of struct xpc_vars.
+ */
+struct xpc_vars {
+ u8 version;
+ u64 heartbeat;
+ u64 heartbeating_to_mask;
+ u64 heartbeat_offline; /* if 0, heartbeat should be changing */
+ int act_nasid;
+ int act_phys_cpuid;
+ u64 vars_part_pa;
+ u64 amos_page_pa; /* paddr of page of AMOs from MSPEC driver */
+ AMO_t *amos_page; /* vaddr of page of AMOs from MSPEC driver */
+};
+
+#define XPC_V_VERSION _XPC_VERSION(3,1) /* version 3.1 of the cross vars */
+
+#define XPC_SUPPORTS_DISENGAGE_REQUEST(_version) \
+ (_version >= _XPC_VERSION(3,1))
+
+
+static inline int
+xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+{
+ return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
+}
+
+static inline void
+xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask | (1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+static inline void
+xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+{
+ u64 old_mask, new_mask;
+
+ do {
+ old_mask = vars->heartbeating_to_mask;
+ new_mask = (old_mask & ~(1UL << partid));
+ } while (cmpxchg(&vars->heartbeating_to_mask, old_mask, new_mask) !=
+ old_mask);
+}
+
+
+/*
+ * The AMOs page consists of a number of AMO variables which are divided into
+ * four groups, The first two groups are used to identify an IRQ's sender.
+ * These two groups consist of 64 and 128 AMO variables respectively. The last
+ * two groups, consisting of just one AMO variable each, are used to identify
+ * the remote partitions that are currently engaged (from the viewpoint of
+ * the XPC running on the remote partition).
+ */
+#define XPC_NOTIFY_IRQ_AMOS 0
+#define XPC_ACTIVATE_IRQ_AMOS (XPC_NOTIFY_IRQ_AMOS + XP_MAX_PARTITIONS)
+#define XPC_ENGAGED_PARTITIONS_AMO (XPC_ACTIVATE_IRQ_AMOS + XP_NASID_MASK_WORDS)
+#define XPC_DISENGAGE_REQUEST_AMO (XPC_ENGAGED_PARTITIONS_AMO + 1)
+
+
+/*
+ * The following structure describes the per partition specific variables.
+ *
+ * An array of these structures, one per partition, will be defined. As a
+ * partition becomes active XPC will copy the array entry corresponding to
+ * itself from that partition. It is desirable that the size of this
+ * structure evenly divide into a cacheline, such that none of the entries
+ * in this array crosses a cacheline boundary. As it is now, each entry
+ * occupies half a cacheline.
+ */
+struct xpc_vars_part {
+ volatile u64 magic;
+
+ u64 openclose_args_pa; /* physical address of open and close args */
+ u64 GPs_pa; /* physical address of Get/Put values */
+
+ u64 IPI_amo_pa; /* physical address of IPI AMO_t structure */
+ int IPI_nasid; /* nasid of where to send IPIs */
+ int IPI_phys_cpuid; /* physical CPU ID of where to send IPIs */
+
+ u8 nchannels; /* #of defined channels supported */
+
+ u8 reserved[23]; /* pad to a full 64 bytes */
+};
+
+/*
+ * The vars_part MAGIC numbers play a part in the first contact protocol.
+ *
+ * MAGIC1 indicates that the per partition specific variables for a remote
+ * partition have been initialized by this partition.
+ *
+ * MAGIC2 indicates that this partition has pulled the remote partititions
+ * per partition variables that pertain to this partition.
+ */
+#define XPC_VP_MAGIC1 0x0053524156435058L /* 'XPCVARS\0'L (little endian) */
+#define XPC_VP_MAGIC2 0x0073726176435058L /* 'XPCvars\0'L (little endian) */
+
+
+/* the reserved page sizes and offsets */
+
+#define XPC_RP_HEADER_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_rsvd_page))
+#define XPC_RP_VARS_SIZE L1_CACHE_ALIGN(sizeof(struct xpc_vars))
+
+#define XPC_RP_PART_NASIDS(_rp) (u64 *) ((u8 *) _rp + XPC_RP_HEADER_SIZE)
+#define XPC_RP_MACH_NASIDS(_rp) (XPC_RP_PART_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS(_rp) ((struct xpc_vars *) XPC_RP_MACH_NASIDS(_rp) + xp_nasid_mask_words)
+#define XPC_RP_VARS_PART(_rp) (struct xpc_vars_part *) ((u8 *) XPC_RP_VARS(rp) + XPC_RP_VARS_SIZE)
+
+
+/*
+ * Functions registered by add_timer() or called by kernel_thread() only
+ * allow for a single 64-bit argument. The following macros can be used to
+ * pack and unpack two (32-bit, 16-bit or 8-bit) arguments into or out from
+ * the passed argument.
+ */
+#define XPC_PACK_ARGS(_arg1, _arg2) \
+ ((((u64) _arg1) & 0xffffffff) | \
+ ((((u64) _arg2) & 0xffffffff) << 32))
+
+#define XPC_UNPACK_ARG1(_args) (((u64) _args) & 0xffffffff)
+#define XPC_UNPACK_ARG2(_args) ((((u64) _args) >> 32) & 0xffffffff)
+
+
+
+/*
+ * Define a Get/Put value pair (pointers) used with a message queue.
+ */
+struct xpc_gp {
+ volatile s64 get; /* Get value */
+ volatile s64 put; /* Put value */
+};
+
+#define XPC_GP_SIZE \
+ L1_CACHE_ALIGN(sizeof(struct xpc_gp) * XPC_NCHANNELS)
+
+
+
+/*
+ * Define a structure that contains arguments associated with opening and
+ * closing a channel.
+ */
+struct xpc_openclose_args {
+ u16 reason; /* reason why channel is closing */
+ u16 msg_size; /* sizeof each message entry */
+ u16 remote_nentries; /* #of message entries in remote msg queue */
+ u16 local_nentries; /* #of message entries in local msg queue */
+ u64 local_msgqueue_pa; /* physical address of local message queue */
+};
+
+#define XPC_OPENCLOSE_ARGS_SIZE \
+ L1_CACHE_ALIGN(sizeof(struct xpc_openclose_args) * XPC_NCHANNELS)
+
+
+
+/* struct xpc_msg flags */
+
+#define XPC_M_DONE 0x01 /* msg has been received/consumed */
+#define XPC_M_READY 0x02 /* msg is ready to be sent */
+#define XPC_M_INTERRUPT 0x04 /* send interrupt when msg consumed */
+
+
+#define XPC_MSG_ADDRESS(_payload) \
+ ((struct xpc_msg *)((u8 *)(_payload) - XPC_MSG_PAYLOAD_OFFSET))
+
+
+
+/*
+ * Defines notify entry.
+ *
+ * This is used to notify a message's sender that their message was received
+ * and consumed by the intended recipient.
+ */
+struct xpc_notify {
+ struct semaphore sema; /* notify semaphore */
+ volatile u8 type; /* type of notification */
+
+ /* the following two fields are only used if type == XPC_N_CALL */
+ xpc_notify_func func; /* user's notify function */
+ void *key; /* pointer to user's key */
+};
+
+/* struct xpc_notify type of notification */
+
+#define XPC_N_CALL 0x01 /* notify function provided by user */
+
+
+
+/*
+ * Define the structure that manages all the stuff required by a channel. In
+ * particular, they are used to manage the messages sent across the channel.
+ *
+ * This structure is private to a partition, and is NOT shared across the
+ * partition boundary.
+ *
+ * There is an array of these structures for each remote partition. It is
+ * allocated at the time a partition becomes active. The array contains one
+ * of these structures for each potential channel connection to that partition.
+ *
+ * Each of these structures manages two message queues (circular buffers).
+ * They are allocated at the time a channel connection is made. One of
+ * these message queues (local_msgqueue) holds the locally created messages
+ * that are destined for the remote partition. The other of these message
+ * queues (remote_msgqueue) is a locally cached copy of the remote partition's
+ * own local_msgqueue.
+ *
+ * The following is a description of the Get/Put pointers used to manage these
+ * two message queues. Consider the local_msgqueue to be on one partition
+ * and the remote_msgqueue to be its cached copy on another partition. A
+ * description of what each of the lettered areas contains is included.
+ *
+ *
+ * local_msgqueue remote_msgqueue
+ *
+ * |/////////| |/////////|
+ * w_remote_GP.get --> +---------+ |/////////|
+ * | F | |/////////|
+ * remote_GP.get --> +---------+ +---------+ <-- local_GP->get
+ * | | | |
+ * | | | E |
+ * | | | |
+ * | | +---------+ <-- w_local_GP.get
+ * | B | |/////////|
+ * | | |////D////|
+ * | | |/////////|
+ * | | +---------+ <-- w_remote_GP.put
+ * | | |////C////|
+ * local_GP->put --> +---------+ +---------+ <-- remote_GP.put
+ * | | |/////////|
+ * | A | |/////////|
+ * | | |/////////|
+ * w_local_GP.put --> +---------+ |/////////|
+ * |/////////| |/////////|
+ *
+ *
+ * ( remote_GP.[get|put] are cached copies of the remote
+ * partition's local_GP->[get|put], and thus their values can
+ * lag behind their counterparts on the remote partition. )
+ *
+ *
+ * A - Messages that have been allocated, but have not yet been sent to the
+ * remote partition.
+ *
+ * B - Messages that have been sent, but have not yet been acknowledged by the
+ * remote partition as having been received.
+ *
+ * C - Area that needs to be prepared for the copying of sent messages, by
+ * the clearing of the message flags of any previously received messages.
+ *
+ * D - Area into which sent messages are to be copied from the remote
+ * partition's local_msgqueue and then delivered to their intended
+ * recipients. [ To allow for a multi-message copy, another pointer
+ * (next_msg_to_pull) has been added to keep track of the next message
+ * number needing to be copied (pulled). It chases after w_remote_GP.put.
+ * Any messages lying between w_local_GP.get and next_msg_to_pull have
+ * been copied and are ready to be delivered. ]
+ *
+ * E - Messages that have been copied and delivered, but have not yet been
+ * acknowledged by the recipient as having been received.
+ *
+ * F - Messages that have been acknowledged, but XPC has not yet notified the
+ * sender that the message was received by its intended recipient.
+ * This is also an area that needs to be prepared for the allocating of
+ * new messages, by the clearing of the message flags of the acknowledged
+ * messages.
+ */
+struct xpc_channel {
+ partid_t partid; /* ID of remote partition connected */
+ spinlock_t lock; /* lock for updating this structure */
+ u32 flags; /* general flags */
+
+ enum xpc_retval reason; /* reason why channel is disconnect'g */
+ int reason_line; /* line# disconnect initiated from */
+
+ u16 number; /* channel # */
+
+ u16 msg_size; /* sizeof each msg entry */
+ u16 local_nentries; /* #of msg entries in local msg queue */
+ u16 remote_nentries; /* #of msg entries in remote msg queue*/
+
+ void *local_msgqueue_base; /* base address of kmalloc'd space */
+ struct xpc_msg *local_msgqueue; /* local message queue */
+ void *remote_msgqueue_base; /* base address of kmalloc'd space */
+ struct xpc_msg *remote_msgqueue;/* cached copy of remote partition's */
+ /* local message queue */
+ u64 remote_msgqueue_pa; /* phys addr of remote partition's */
+ /* local message queue */
+
+ atomic_t references; /* #of external references to queues */
+
+ atomic_t n_on_msg_allocate_wq; /* #on msg allocation wait queue */
+ wait_queue_head_t msg_allocate_wq; /* msg allocation wait queue */
+
+ u8 delayed_IPI_flags; /* IPI flags received, but delayed */
+ /* action until channel disconnected */
+
+ /* queue of msg senders who want to be notified when msg received */
+
+ atomic_t n_to_notify; /* #of msg senders to notify */
+ struct xpc_notify *notify_queue;/* notify queue for messages sent */
+
+ xpc_channel_func func; /* user's channel function */
+ void *key; /* pointer to user's key */
+
+ struct semaphore msg_to_pull_sema; /* next msg to pull serialization */
+ struct semaphore wdisconnect_sema; /* wait for channel disconnect */
+
+ struct xpc_openclose_args *local_openclose_args; /* args passed on */
+ /* opening or closing of channel */
+
+ /* various flavors of local and remote Get/Put values */
+
+ struct xpc_gp *local_GP; /* local Get/Put values */
+ struct xpc_gp remote_GP; /* remote Get/Put values */
+ struct xpc_gp w_local_GP; /* working local Get/Put values */
+ struct xpc_gp w_remote_GP; /* working remote Get/Put values */
+ s64 next_msg_to_pull; /* Put value of next msg to pull */
+
+ /* kthread management related fields */
+
+// >>> rethink having kthreads_assigned_limit and kthreads_idle_limit; perhaps
+// >>> allow the assigned limit be unbounded and let the idle limit be dynamic
+// >>> dependent on activity over the last interval of time
+ atomic_t kthreads_assigned; /* #of kthreads assigned to channel */
+ u32 kthreads_assigned_limit; /* limit on #of kthreads assigned */
+ atomic_t kthreads_idle; /* #of kthreads idle waiting for work */
+ u32 kthreads_idle_limit; /* limit on #of kthreads idle */
+ atomic_t kthreads_active; /* #of kthreads actively working */
+ // >>> following field is temporary
+ u32 kthreads_created; /* total #of kthreads created */
+
+ wait_queue_head_t idle_wq; /* idle kthread wait queue */
+
+} ____cacheline_aligned;
+
+
+/* struct xpc_channel flags */
+
+#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
+
+#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
+#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
+#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
+#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
+
+#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
+#define XPC_C_CONNECTCALLOUT 0x00000040 /* channel connected callout made */
+#define XPC_C_CONNECTED 0x00000080 /* local channel is connected */
+#define XPC_C_CONNECTING 0x00000100 /* channel is being connected */
+
+#define XPC_C_RCLOSEREPLY 0x00000200 /* remote close channel reply */
+#define XPC_C_CLOSEREPLY 0x00000400 /* local close channel reply */
+#define XPC_C_RCLOSEREQUEST 0x00000800 /* remote close channel request */
+#define XPC_C_CLOSEREQUEST 0x00001000 /* local close channel request */
+
+#define XPC_C_DISCONNECTED 0x00002000 /* channel is disconnected */
+#define XPC_C_DISCONNECTING 0x00004000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTCALLOUT 0x00008000 /* chan disconnected callout made */
+#define XPC_C_WDISCONNECT 0x00010000 /* waiting for channel disconnect */
+
+
+
+/*
+ * Manages channels on a partition basis. There is one of these structures
+ * for each partition (a partition will never utilize the structure that
+ * represents itself).
+ */
+struct xpc_partition {
+
+ /* XPC HB infrastructure */
+
+ u8 remote_rp_version; /* version# of partition's rsvd pg */
+ struct timespec remote_rp_stamp;/* time when rsvd pg was initialized */
+ u64 remote_rp_pa; /* phys addr of partition's rsvd pg */
+ u64 remote_vars_pa; /* phys addr of partition's vars */
+ u64 remote_vars_part_pa; /* phys addr of partition's vars part */
+ u64 last_heartbeat; /* HB at last read */
+ u64 remote_amos_page_pa; /* phys addr of partition's amos page */
+ int remote_act_nasid; /* active part's act/deact nasid */
+ int remote_act_phys_cpuid; /* active part's act/deact phys cpuid */
+ u32 act_IRQ_rcvd; /* IRQs since activation */
+ spinlock_t act_lock; /* protect updating of act_state */
+ u8 act_state; /* from XPC HB viewpoint */
+ u8 remote_vars_version; /* version# of partition's vars */
+ enum xpc_retval reason; /* reason partition is deactivating */
+ int reason_line; /* line# deactivation initiated from */
+ int reactivate_nasid; /* nasid in partition to reactivate */
+
+ unsigned long disengage_request_timeout; /* timeout in jiffies */
+ struct timer_list disengage_request_timer;
+
+
+ /* XPC infrastructure referencing and teardown control */
+
+ volatile u8 setup_state; /* infrastructure setup state */
+ wait_queue_head_t teardown_wq; /* kthread waiting to teardown infra */
+ atomic_t references; /* #of references to infrastructure */
+
+
+ /*
+ * NONE OF THE PRECEDING FIELDS OF THIS STRUCTURE WILL BE CLEARED WHEN
+ * XPC SETS UP THE NECESSARY INFRASTRUCTURE TO SUPPORT CROSS PARTITION
+ * COMMUNICATION. ALL OF THE FOLLOWING FIELDS WILL BE CLEARED. (THE
+ * 'nchannels' FIELD MUST BE THE FIRST OF THE FIELDS TO BE CLEARED.)
+ */
+
+
+ u8 nchannels; /* #of defined channels supported */
+ atomic_t nchannels_active; /* #of channels that are not DISCONNECTED */
+ atomic_t nchannels_engaged;/* #of channels engaged with remote part */
+ struct xpc_channel *channels;/* array of channel structures */
+
+ void *local_GPs_base; /* base address of kmalloc'd space */
+ struct xpc_gp *local_GPs; /* local Get/Put values */
+ void *remote_GPs_base; /* base address of kmalloc'd space */
+ struct xpc_gp *remote_GPs;/* copy of remote partition's local Get/Put */
+ /* values */
+ u64 remote_GPs_pa; /* phys address of remote partition's local */
+ /* Get/Put values */
+
+
+ /* fields used to pass args when opening or closing a channel */
+
+ void *local_openclose_args_base; /* base address of kmalloc'd space */
+ struct xpc_openclose_args *local_openclose_args; /* local's args */
+ void *remote_openclose_args_base; /* base address of kmalloc'd space */
+ struct xpc_openclose_args *remote_openclose_args; /* copy of remote's */
+ /* args */
+ u64 remote_openclose_args_pa; /* phys addr of remote's args */
+
+
+ /* IPI sending, receiving and handling related fields */
+
+ int remote_IPI_nasid; /* nasid of where to send IPIs */
+ int remote_IPI_phys_cpuid; /* phys CPU ID of where to send IPIs */
+ AMO_t *remote_IPI_amo_va; /* address of remote IPI AMO_t structure */
+
+ AMO_t *local_IPI_amo_va; /* address of IPI AMO_t structure */
+ u64 local_IPI_amo; /* IPI amo flags yet to be handled */
+ char IPI_owner[8]; /* IPI owner's name */
+ struct timer_list dropped_IPI_timer; /* dropped IPI timer */
+
+ spinlock_t IPI_lock; /* IPI handler lock */
+
+
+ /* channel manager related fields */
+
+ atomic_t channel_mgr_requests; /* #of requests to activate chan mgr */
+ wait_queue_head_t channel_mgr_wq; /* channel mgr's wait queue */
+
+} ____cacheline_aligned;
+
+
+/* struct xpc_partition act_state values (for XPC HB) */
+
+#define XPC_P_INACTIVE 0x00 /* partition is not active */
+#define XPC_P_ACTIVATION_REQ 0x01 /* created thread to activate */
+#define XPC_P_ACTIVATING 0x02 /* activation thread started */
+#define XPC_P_ACTIVE 0x03 /* xpc_partition_up() was called */
+#define XPC_P_DEACTIVATING 0x04 /* partition deactivation initiated */
+
+
+#define XPC_DEACTIVATE_PARTITION(_p, _reason) \
+ xpc_deactivate_partition(__LINE__, (_p), (_reason))
+
+
+/* struct xpc_partition setup_state values */
+
+#define XPC_P_UNSET 0x00 /* infrastructure was never setup */
+#define XPC_P_SETUP 0x01 /* infrastructure is setup */
+#define XPC_P_WTEARDOWN 0x02 /* waiting to teardown infrastructure */
+#define XPC_P_TORNDOWN 0x03 /* infrastructure is torndown */
+
+
+
+/*
+ * struct xpc_partition IPI_timer #of seconds to wait before checking for
+ * dropped IPIs. These occur whenever an IPI amo write doesn't complete until
+ * after the IPI was received.
+ */
+#define XPC_P_DROPPED_IPI_WAIT (0.25 * HZ)
+
+
+/* number of seconds to wait for other partitions to disengage */
+#define XPC_DISENGAGE_REQUEST_DEFAULT_TIMELIMIT 90
+
+/* interval in seconds to print 'waiting disengagement' messages */
+#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
+
+
+#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
+
+
+
+/* found in xp_main.c */
+extern struct xpc_registration xpc_registrations[];
+
+
+/* found in xpc_main.c */
+extern struct device *xpc_part;
+extern struct device *xpc_chan;
+extern int xpc_disengage_request_timelimit;
+extern int xpc_disengage_request_timedout;
+extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
+extern void xpc_dropped_IPI_check(struct xpc_partition *);
+extern void xpc_activate_partition(struct xpc_partition *);
+extern void xpc_activate_kthreads(struct xpc_channel *, int);
+extern void xpc_create_kthreads(struct xpc_channel *, int);
+extern void xpc_disconnect_wait(int);
+
+
+/* found in xpc_partition.c */
+extern int xpc_exiting;
+extern struct xpc_vars *xpc_vars;
+extern struct xpc_rsvd_page *xpc_rsvd_page;
+extern struct xpc_vars_part *xpc_vars_part;
+extern struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
+extern char xpc_remote_copy_buffer[];
+extern struct xpc_rsvd_page *xpc_rsvd_page_init(void);
+extern void xpc_allow_IPI_ops(void);
+extern void xpc_restrict_IPI_ops(void);
+extern int xpc_identify_act_IRQ_sender(void);
+extern int xpc_partition_disengaged(struct xpc_partition *);
+extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
+extern void xpc_mark_partition_inactive(struct xpc_partition *);
+extern void xpc_discovery(void);
+extern void xpc_check_remote_hb(void);
+extern void xpc_deactivate_partition(const int, struct xpc_partition *,
+ enum xpc_retval);
+extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *);
+
+
+/* found in xpc_channel.c */
+extern void xpc_initiate_connect(int);
+extern void xpc_initiate_disconnect(int);
+extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **);
+extern enum xpc_retval xpc_initiate_send(partid_t, int, void *);
+extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *,
+ xpc_notify_func, void *);
+extern void xpc_initiate_received(partid_t, int, void *);
+extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *);
+extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *);
+extern void xpc_process_channel_activity(struct xpc_partition *);
+extern void xpc_connected_callout(struct xpc_channel *);
+extern void xpc_deliver_msg(struct xpc_channel *);
+extern void xpc_disconnect_channel(const int, struct xpc_channel *,
+ enum xpc_retval, unsigned long *);
+extern void xpc_disconnect_callout(struct xpc_channel *, enum xpc_retval);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
+extern void xpc_teardown_infrastructure(struct xpc_partition *);
+
+
+
+static inline void
+xpc_wakeup_channel_mgr(struct xpc_partition *part)
+{
+ if (atomic_inc_return(&part->channel_mgr_requests) == 1) {
+ wake_up(&part->channel_mgr_wq);
+ }
+}
+
+
+
+/*
+ * These next two inlines are used to keep us from tearing down a channel's
+ * msg queues while a thread may be referencing them.
+ */
+static inline void
+xpc_msgqueue_ref(struct xpc_channel *ch)
+{
+ atomic_inc(&ch->references);
+}
+
+static inline void
+xpc_msgqueue_deref(struct xpc_channel *ch)
+{
+ s32 refs = atomic_dec_return(&ch->references);
+
+ DBUG_ON(refs < 0);
+ if (refs == 0) {
+ xpc_wakeup_channel_mgr(&xpc_partitions[ch->partid]);
+ }
+}
+
+
+
+#define XPC_DISCONNECT_CHANNEL(_ch, _reason, _irqflgs) \
+ xpc_disconnect_channel(__LINE__, _ch, _reason, _irqflgs)
+
+
+/*
+ * These two inlines are used to keep us from tearing down a partition's
+ * setup infrastructure while a thread may be referencing it.
+ */
+static inline void
+xpc_part_deref(struct xpc_partition *part)
+{
+ s32 refs = atomic_dec_return(&part->references);
+
+
+ DBUG_ON(refs < 0);
+ if (refs == 0 && part->setup_state == XPC_P_WTEARDOWN) {
+ wake_up(&part->teardown_wq);
+ }
+}
+
+static inline int
+xpc_part_ref(struct xpc_partition *part)
+{
+ int setup;
+
+
+ atomic_inc(&part->references);
+ setup = (part->setup_state == XPC_P_SETUP);
+ if (!setup) {
+ xpc_part_deref(part);
+ }
+ return setup;
+}
+
+
+
+/*
+ * The following macro is to be used for the setting of the reason and
+ * reason_line fields in both the struct xpc_channel and struct xpc_partition
+ * structures.
+ */
+#define XPC_SET_REASON(_p, _reason, _line) \
+ { \
+ (_p)->reason = _reason; \
+ (_p)->reason_line = _line; \
+ }
+
+
+
+/*
+ * This next set of inlines are used to keep track of when a partition is
+ * potentially engaged in accessing memory belonging to another partition.
+ */
+
+static inline void
+xpc_mark_partition_engaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_mark_partition_disengaged(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_ENGAGED_PARTITIONS_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_request_partition_disengage(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* set bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR,
+ (1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline void
+xpc_cancel_partition_disengage_request(struct xpc_partition *part)
+{
+ unsigned long irq_flags;
+ AMO_t *amo = (AMO_t *) __va(part->remote_amos_page_pa +
+ (XPC_DISENGAGE_REQUEST_AMO * sizeof(AMO_t)));
+
+
+ local_irq_save(irq_flags);
+
+ /* clear bit corresponding to our partid in remote partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~(1UL << sn_partition_id));
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ (void) xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->
+ variable), xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+}
+
+static inline u64
+xpc_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline u64
+xpc_partition_disengage_requested(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* return our partition's AMO variable ANDed with partid_mask */
+ return (FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_LOAD) &
+ partid_mask);
+}
+
+static inline void
+xpc_clear_partition_engaged(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_ENGAGED_PARTITIONS_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+static inline void
+xpc_clear_partition_disengage_request(u64 partid_mask)
+{
+ AMO_t *amo = xpc_vars->amos_page + XPC_DISENGAGE_REQUEST_AMO;
+
+
+ /* clear bit(s) based on partid_mask in our partition's AMO */
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_AND,
+ ~partid_mask);
+}
+
+
+
+/*
+ * The following set of macros and inlines are used for the sending and
+ * receiving of IPIs (also known as IRQs). There are two flavors of IPIs,
+ * one that is associated with partition activity (SGI_XPC_ACTIVATE) and
+ * the other that is associated with channel activity (SGI_XPC_NOTIFY).
+ */
+
+static inline u64
+xpc_IPI_receive(AMO_t *amo)
+{
+ return FETCHOP_LOAD_OP(TO_AMO((u64) &amo->variable), FETCHOP_CLEAR);
+}
+
+
+static inline enum xpc_retval
+xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
+{
+ int ret = 0;
+ unsigned long irq_flags;
+
+
+ local_irq_save(irq_flags);
+
+ FETCHOP_STORE_OP(TO_AMO((u64) &amo->variable), FETCHOP_OR, flag);
+ sn_send_IPI_phys(nasid, phys_cpuid, vector, 0);
+
+ /*
+ * We must always use the nofault function regardless of whether we
+ * are on a Shub 1.1 system or a Shub 1.2 slice 0xc processor. If we
+ * didn't, we'd never know that the other partition is down and would
+ * keep sending IPIs and AMOs to it until the heartbeat times out.
+ */
+ ret = xp_nofault_PIOR((u64 *) GLOBAL_MMR_ADDR(NASID_GET(&amo->variable),
+ xp_nofault_PIOR_target));
+
+ local_irq_restore(irq_flags);
+
+ return ((ret == 0) ? xpcSuccess : xpcPioReadError);
+}
+
+
+/*
+ * IPIs associated with SGI_XPC_ACTIVATE IRQ.
+ */
+
+/*
+ * Flag the appropriate AMO variable and send an IPI to the specified node.
+ */
+static inline void
+xpc_activate_IRQ_send(u64 amos_page_pa, int from_nasid, int to_nasid,
+ int to_phys_cpuid)
+{
+ int w_index = XPC_NASID_W_INDEX(from_nasid);
+ int b_index = XPC_NASID_B_INDEX(from_nasid);
+ AMO_t *amos = (AMO_t *) __va(amos_page_pa +
+ (XPC_ACTIVATE_IRQ_AMOS * sizeof(AMO_t)));
+
+
+ (void) xpc_IPI_send(&amos[w_index], (1UL << b_index), to_nasid,
+ to_phys_cpuid, SGI_XPC_ACTIVATE);
+}
+
+static inline void
+xpc_IPI_send_activate(struct xpc_vars *vars)
+{
+ xpc_activate_IRQ_send(vars->amos_page_pa, cnodeid_to_nasid(0),
+ vars->act_nasid, vars->act_phys_cpuid);
+}
+
+static inline void
+xpc_IPI_send_activated(struct xpc_partition *part)
+{
+ xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+ part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
+static inline void
+xpc_IPI_send_reactivate(struct xpc_partition *part)
+{
+ xpc_activate_IRQ_send(xpc_vars->amos_page_pa, part->reactivate_nasid,
+ xpc_vars->act_nasid, xpc_vars->act_phys_cpuid);
+}
+
+static inline void
+xpc_IPI_send_disengage(struct xpc_partition *part)
+{
+ xpc_activate_IRQ_send(part->remote_amos_page_pa, cnodeid_to_nasid(0),
+ part->remote_act_nasid, part->remote_act_phys_cpuid);
+}
+
+
+/*
+ * IPIs associated with SGI_XPC_NOTIFY IRQ.
+ */
+
+/*
+ * Send an IPI to the remote partition that is associated with the
+ * specified channel.
+ */
+#define XPC_NOTIFY_IRQ_SEND(_ch, _ipi_f, _irq_f) \
+ xpc_notify_IRQ_send(_ch, _ipi_f, #_ipi_f, _irq_f)
+
+static inline void
+xpc_notify_IRQ_send(struct xpc_channel *ch, u8 ipi_flag, char *ipi_flag_string,
+ unsigned long *irq_flags)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
+ enum xpc_retval ret;
+
+
+ if (likely(part->act_state != XPC_P_DEACTIVATING)) {
+ ret = xpc_IPI_send(part->remote_IPI_amo_va,
+ (u64) ipi_flag << (ch->number * 8),
+ part->remote_IPI_nasid,
+ part->remote_IPI_phys_cpuid,
+ SGI_XPC_NOTIFY);
+ dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
+ ipi_flag_string, ch->partid, ch->number, ret);
+ if (unlikely(ret != xpcSuccess)) {
+ if (irq_flags != NULL) {
+ spin_unlock_irqrestore(&ch->lock, *irq_flags);
+ }
+ XPC_DEACTIVATE_PARTITION(part, ret);
+ if (irq_flags != NULL) {
+ spin_lock_irqsave(&ch->lock, *irq_flags);
+ }
+ }
+ }
+}
+
+
+/*
+ * Make it look like the remote partition, which is associated with the
+ * specified channel, sent us an IPI. This faked IPI will be handled
+ * by xpc_dropped_IPI_check().
+ */
+#define XPC_NOTIFY_IRQ_SEND_LOCAL(_ch, _ipi_f) \
+ xpc_notify_IRQ_send_local(_ch, _ipi_f, #_ipi_f)
+
+static inline void
+xpc_notify_IRQ_send_local(struct xpc_channel *ch, u8 ipi_flag,
+ char *ipi_flag_string)
+{
+ struct xpc_partition *part = &xpc_partitions[ch->partid];
+
+
+ FETCHOP_STORE_OP(TO_AMO((u64) &part->local_IPI_amo_va->variable),
+ FETCHOP_OR, ((u64) ipi_flag << (ch->number * 8)));
+ dev_dbg(xpc_chan, "%s sent local from partid=%d, channel=%d\n",
+ ipi_flag_string, ch->partid, ch->number);
+}
+
+
+/*
+ * The sending and receiving of IPIs includes the setting of an AMO variable
+ * to indicate the reason the IPI was sent. The 64-bit variable is divided
+ * up into eight bytes, ordered from right to left. Byte zero pertains to
+ * channel 0, byte one to channel 1, and so on. Each byte is described by
+ * the following IPI flags.
+ */
+
+#define XPC_IPI_CLOSEREQUEST 0x01
+#define XPC_IPI_CLOSEREPLY 0x02
+#define XPC_IPI_OPENREQUEST 0x04
+#define XPC_IPI_OPENREPLY 0x08
+#define XPC_IPI_MSGREQUEST 0x10
+
+
+/* given an AMO variable and a channel#, get its associated IPI flags */
+#define XPC_GET_IPI_FLAGS(_amo, _c) ((u8) (((_amo) >> ((_c) * 8)) & 0xff))
+#define XPC_SET_IPI_FLAGS(_amo, _c, _f) (_amo) |= ((u64) (_f) << ((_c) * 8))
+
+#define XPC_ANY_OPENCLOSE_IPI_FLAGS_SET(_amo) ((_amo) & 0x0f0f0f0f0f0f0f0f)
+#define XPC_ANY_MSG_IPI_FLAGS_SET(_amo) ((_amo) & 0x1010101010101010)
+
+
+static inline void
+xpc_IPI_send_closerequest(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->local_openclose_args;
+
+
+ args->reason = ch->reason;
+
+ XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREQUEST, irq_flags);
+}
+
+static inline void
+xpc_IPI_send_closereply(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_CLOSEREPLY, irq_flags);
+}
+
+static inline void
+xpc_IPI_send_openrequest(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->local_openclose_args;
+
+
+ args->msg_size = ch->msg_size;
+ args->local_nentries = ch->local_nentries;
+
+ XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREQUEST, irq_flags);
+}
+
+static inline void
+xpc_IPI_send_openreply(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_openclose_args *args = ch->local_openclose_args;
+
+
+ args->remote_nentries = ch->remote_nentries;
+ args->local_nentries = ch->local_nentries;
+ args->local_msgqueue_pa = __pa(ch->local_msgqueue);
+
+ XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_OPENREPLY, irq_flags);
+}
+
+static inline void
+xpc_IPI_send_msgrequest(struct xpc_channel *ch)
+{
+ XPC_NOTIFY_IRQ_SEND(ch, XPC_IPI_MSGREQUEST, NULL);
+}
+
+static inline void
+xpc_IPI_send_local_msgrequest(struct xpc_channel *ch)
+{
+ XPC_NOTIFY_IRQ_SEND_LOCAL(ch, XPC_IPI_MSGREQUEST);
+}
+
+
+/*
+ * Memory for XPC's AMO variables is allocated by the MSPEC driver. These
+ * pages are located in the lowest granule. The lowest granule uses 4k pages
+ * for cached references and an alternate TLB handler to never provide a
+ * cacheable mapping for the entire region. This will prevent speculative
+ * reading of cached copies of our lines from being issued which will cause
+ * a PI FSB Protocol error to be generated by the SHUB. For XPC, we need 64
+ * AMO variables (based on XP_MAX_PARTITIONS) for message notification and an
+ * additional 128 AMO variables (based on XP_NASID_MASK_WORDS) for partition
+ * activation and 2 AMO variables for partition deactivation.
+ */
+static inline AMO_t *
+xpc_IPI_init(int index)
+{
+ AMO_t *amo = xpc_vars->amos_page + index;
+
+
+ (void) xpc_IPI_receive(amo); /* clear AMO variable */
+ return amo;
+}
+
+
+
+static inline enum xpc_retval
+xpc_map_bte_errors(bte_result_t error)
+{
+ switch (error) {
+ case BTE_SUCCESS: return xpcSuccess;
+ case BTEFAIL_DIR: return xpcBteDirectoryError;
+ case BTEFAIL_POISON: return xpcBtePoisonError;
+ case BTEFAIL_WERR: return xpcBteWriteError;
+ case BTEFAIL_ACCESS: return xpcBteAccessError;
+ case BTEFAIL_PWERR: return xpcBtePWriteError;
+ case BTEFAIL_PRERR: return xpcBtePReadError;
+ case BTEFAIL_TOUT: return xpcBteTimeOutError;
+ case BTEFAIL_XTERR: return xpcBteXtalkError;
+ case BTEFAIL_NOTAVAIL: return xpcBteNotAvailable;
+ default: return xpcBteUnmappedError;
+ }
+}
+
+
+
+static inline void *
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
+{
+ /* see if kmalloc will give us cachline aligned memory by default */
+ *base = kmalloc(size, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ if ((u64) *base == L1_CACHE_ALIGN((u64) *base)) {
+ return *base;
+ }
+ kfree(*base);
+
+ /* nope, we'll have to do it ourselves */
+ *base = kmalloc(size + L1_CACHE_BYTES, flags);
+ if (*base == NULL) {
+ return NULL;
+ }
+ return (void *) L1_CACHE_ALIGN((u64) *base);
+}
+
+
+/*
+ * Check to see if there is any channel activity to/from the specified
+ * partition.
+ */
+static inline void
+xpc_check_for_channel_activity(struct xpc_partition *part)
+{
+ u64 IPI_amo;
+ unsigned long irq_flags;
+
+
+ IPI_amo = xpc_IPI_receive(part->local_IPI_amo_va);
+ if (IPI_amo == 0) {
+ return;
+ }
+
+ spin_lock_irqsave(&part->IPI_lock, irq_flags);
+ part->local_IPI_amo |= IPI_amo;
+ spin_unlock_irqrestore(&part->IPI_lock, irq_flags);
+
+ dev_dbg(xpc_chan, "received IPI from partid=%d, IPI_amo=0x%lx\n",
+ XPC_PARTID(part), IPI_amo);
+
+ xpc_wakeup_channel_mgr(part);
+}
+
+
+#endif /* _ASM_IA64_SN_XPC_H */
+
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17
#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */
+#define TIF_DB_DISABLED 19 /* debug trap disabled for fsyscall */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
-#define _TIF_SIGDELAYED (1 << TIF_SIGDELAYED)
+#define _TIF_SIGDELAYED (1 << TIF_SIGDELAYED)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_MCA_INIT (1 << TIF_MCA_INIT)
+#define _TIF_DB_DISABLED (1 << TIF_DB_DISABLED)
/* "work to do on user-return" bits */
#define TIF_ALLWORK_MASK (_TIF_NOTIFY_RESUME|_TIF_SIGPENDING|_TIF_NEED_RESCHED|_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SIGDELAYED)
projects / powerpc.git / commitdiff