lin: Convert logging to AVR_LOG()

diff --git a/simavr/sim/avr_lin.c b/simavr/sim/avr_lin.c
index a44b0ab..d719ee4 100644 (file)
--- a/simavr/sim/avr_lin.c
+++ b/simavr/sim/avr_lin.c
@@ -34,21 +34,21 @@ avr_lin_baud_write(
        avr_lin_t *p = (avr_lin_t*) param;
 
        if (p->r_linbtr != p->ldisr.reg || p->r_linbtr != p->lbt.reg) { // sanity check
-               printf("Error: LDISR and LBT[x] register different!\n");
+               AVR_LOG(avr, LOG_ERROR, "LIN: LDISR and LBT[x] register different!\n");
                return;
        }
 
-       printf("LIN addr[%04x] = %02x\n", addr, v);
+       AVR_LOG(avr, LOG_TRACE, "LIN: addr[%04x] = %02x\n", addr, v);
        if (addr == p->ldisr.reg) {
                if (avr_regbit_get(avr, p->lena)) {
-                       printf("Warning: LENA bit set on changing LBTR\n");
+                       AVR_LOG(avr, LOG_WARNING, "LIN: LENA bit set on changing LBTR\n");
                        return;
                }
                if ((v >> p->ldisr.bit) & p->ldisr.mask) {
                        uint8_t lbt = (v >> p->lbt.bit) & p->lbt.mask;
                        uint8_t ov = v;
                        v = (1 << p->ldisr.bit) | (lbt << p->lbt.bit);
-                       printf("LIN: v=%02x -> LBT = %02x -> LINBT = %02x\n", ov, lbt, v);
+                       AVR_LOG(avr, LOG_TRACE, "LIN: v=%02x -> LBT = %02x -> LINBT = %02x\n", ov, lbt, v);
                } else {
                        v = 0x20;
                }
@@ -57,25 +57,26 @@ avr_lin_baud_write(
 
        uint32_t lbt = avr_regbit_get(avr, p->lbt);
        uint32_t lbrr = (avr->data[p->r_linbrrh] << 8) | avr->data[p->r_linbrrl];
-       printf("LIN-UART LBT/LBRR to %04x/%04x\n", lbt, lbrr);
+       AVR_LOG(avr, LOG_TRACE, "LIN: UART LBT/LBRR to %04x/%04x\n", lbt, lbrr);
        uint32_t baud = avr->frequency / (lbt * (lbrr + 1));
        uint32_t word_size = 1 /*start*/+ 8 /*data bits*/+ 1 /*parity*/+ 1 /*stop*/;
 
-       printf("LIN-UART configured to %04x/%04x = %d bps, 8 data 1 stop\n", lbt,
+       AVR_LOG(avr, LOG_TRACE, "LIN: UART configured to %04x/%04x = %d bps, 8 data 1 stop\n", lbt,
                lbrr, baud);
 
        p->uart.usec_per_byte = 1000000 / (baud / word_size);
-       printf("Roughly %d usec per bytes\n", (int) p->uart.usec_per_byte);
+       AVR_LOG(avr, LOG_TRACE, "LIN: Roughly %d usec per bytes\n", (int) p->uart.usec_per_byte);
 }
 
 static void
 avr_lin_reset(
                avr_io_t *port)
 {
-       printf("LIN-UART: reset\n");
        avr_lin_t *p = (avr_lin_t*) port;
        avr_t * avr = p->io.avr;
 
+       AVR_LOG(avr, LOG_TRACE, "LIN: UART: reset\n");
+
        p->uart.io.reset(&p->uart.io);
        avr->data[p->r_linbtr] = 0x20;
 }