help
This driver adds support for Toshiba TC86C001 GOKU-S chip.
+config BLK_DEV_CELLEB
+ tristate "Toshiba's Cell Reference Set IDE support"
+ depends on PPC_CELLEB
+ help
+ This driver provides support for the built-in IDE controller on
+ Toshiba Cell Reference Board.
+ If unsure, say Y.
+
endif
config BLK_DEV_IDE_PMAC
to transfer data to and from memory. Saying Y is safe and improves
performance.
-config BLK_DEV_IDE_CELLEB
- bool "Toshiba's Cell Reference Set IDE support"
- depends on PPC_CELLEB && IDE=y
- help
- This driver provides support for the built-in IDE controller on
- Toshiba Cell Reference Board.
- If unsure, say Y.
-
config BLK_DEV_IDE_SWARM
tristate "IDE for Sibyte evaluation boards"
depends on SIBYTE_SB1xxx_SOC
# built-in only drivers from ppc/
ide-core-$(CONFIG_BLK_DEV_MPC8xx_IDE) += ppc/mpc8xx.o
ide-core-$(CONFIG_BLK_DEV_IDE_PMAC) += ppc/pmac.o
-ide-core-$(CONFIG_BLK_DEV_IDE_CELLEB) += ppc/scc_pata.o
# built-in only drivers from h8300/
ide-core-$(CONFIG_H8300) += h8300/ide-h8300.o
obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
+obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o
obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
--- /dev/null
+/*
+ * Support for IDE interfaces on Celleb platform
+ *
+ * (C) Copyright 2006 TOSHIBA CORPORATION
+ *
+ * This code is based on drivers/ide/pci/siimage.c:
+ * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
+ * Copyright (C) 2003 Red Hat <alan@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
+
+#define SCC_PATA_NAME "scc IDE"
+
+#define TDVHSEL_MASTER 0x00000001
+#define TDVHSEL_SLAVE 0x00000004
+
+#define MODE_JCUSFEN 0x00000080
+
+#define CCKCTRL_ATARESET 0x00040000
+#define CCKCTRL_BUFCNT 0x00020000
+#define CCKCTRL_CRST 0x00010000
+#define CCKCTRL_OCLKEN 0x00000100
+#define CCKCTRL_ATACLKOEN 0x00000002
+#define CCKCTRL_LCLKEN 0x00000001
+
+#define QCHCD_IOS_SS 0x00000001
+
+#define QCHSD_STPDIAG 0x00020000
+
+#define INTMASK_MSK 0xD1000012
+#define INTSTS_SERROR 0x80000000
+#define INTSTS_PRERR 0x40000000
+#define INTSTS_RERR 0x10000000
+#define INTSTS_ICERR 0x01000000
+#define INTSTS_BMSINT 0x00000010
+#define INTSTS_BMHE 0x00000008
+#define INTSTS_IOIRQS 0x00000004
+#define INTSTS_INTRQ 0x00000002
+#define INTSTS_ACTEINT 0x00000001
+
+#define ECMODE_VALUE 0x01
+
+static struct scc_ports {
+ unsigned long ctl, dma;
+ unsigned char hwif_id; /* for removing hwif from system */
+} scc_ports[MAX_HWIFS];
+
+/* PIO transfer mode table */
+/* JCHST */
+static unsigned long JCHSTtbl[2][7] = {
+ {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHHT */
+static unsigned long JCHHTtbl[2][7] = {
+ {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
+ {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
+};
+
+/* JCHCT */
+static unsigned long JCHCTtbl[2][7] = {
+ {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
+ {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
+};
+
+
+/* DMA transfer mode table */
+/* JCHDCTM/JCHDCTS */
+static unsigned long JCHDCTxtbl[2][7] = {
+ {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
+ {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
+};
+
+/* JCSTWTM/JCSTWTS */
+static unsigned long JCSTWTxtbl[2][7] = {
+ {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
+ {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCTSS */
+static unsigned long JCTSStbl[2][7] = {
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
+ {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
+};
+
+/* JCENVT */
+static unsigned long JCENVTtbl[2][7] = {
+ {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
+};
+
+/* JCACTSELS/JCACTSELM */
+static unsigned long JCACTSELtbl[2][7] = {
+ {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
+ {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
+};
+
+
+static u8 scc_ide_inb(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u8)data;
+}
+
+static u16 scc_ide_inw(unsigned long port)
+{
+ u32 data = in_be32((void*)port);
+ return (u16)data;
+}
+
+static void scc_ide_insw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_insl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ *ptr++ = le16_to_cpu(in_be32((void*)port));
+ }
+}
+
+static void scc_ide_outb(u8 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void scc_ide_outw(u16 addr, unsigned long port)
+{
+ out_be32((void*)port, addr);
+}
+
+static void
+scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ out_be32((void*)port, addr);
+ __asm__ __volatile__("eieio":::"memory");
+ in_be32((void*)(hwif->dma_base + 0x01c));
+ __asm__ __volatile__("eieio":::"memory");
+}
+
+static void
+scc_ide_outsw(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+static void
+scc_ide_outsl(unsigned long port, void *addr, u32 count)
+{
+ u16 *ptr = (u16 *)addr;
+ while (count--) {
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ out_be32((void*)port, cpu_to_le16(*ptr++));
+ }
+}
+
+/**
+ * scc_ratemask - Compute available modes
+ * @drive: IDE drive
+ *
+ * Compute the available speeds for the devices on the interface.
+ * Enforce UDMA33 as a limit if there is no 80pin cable present.
+ */
+
+static u8 scc_ratemask(ide_drive_t *drive)
+{
+ u8 mode = 4;
+
+ if (!eighty_ninty_three(drive))
+ mode = min(mode, (u8)1);
+ return mode;
+}
+
+/**
+ * scc_tuneproc - tune a drive PIO mode
+ * @drive: drive to tune
+ * @mode_wanted: the target operating mode
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long piosht_port = ctl_base + 0x000;
+ unsigned long pioct_port = ctl_base + 0x004;
+ unsigned long reg;
+ unsigned char speed = XFER_PIO_0;
+ int offset;
+
+ mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
+ switch (mode_wanted) {
+ case 4:
+ speed = XFER_PIO_4;
+ break;
+ case 3:
+ speed = XFER_PIO_3;
+ break;
+ case 2:
+ speed = XFER_PIO_2;
+ break;
+ case 1:
+ speed = XFER_PIO_1;
+ break;
+ case 0:
+ default:
+ speed = XFER_PIO_0;
+ break;
+ }
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+ reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
+ out_be32((void __iomem *)piosht_port, reg);
+ reg = JCHCTtbl[offset][mode_wanted];
+ out_be32((void __iomem *)pioct_port, reg);
+
+ ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_tune_chipset - tune a drive DMA mode
+ * @drive: Drive to set up
+ * @xferspeed: speed we want to achieve
+ *
+ * Load the timing settings for this device mode into the
+ * controller.
+ */
+
+static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+ unsigned long ctl_base = ports->ctl;
+ unsigned long cckctrl_port = ctl_base + 0xff0;
+ unsigned long mdmact_port = ctl_base + 0x008;
+ unsigned long mcrcst_port = ctl_base + 0x00c;
+ unsigned long sdmact_port = ctl_base + 0x010;
+ unsigned long scrcst_port = ctl_base + 0x014;
+ unsigned long udenvt_port = ctl_base + 0x018;
+ unsigned long tdvhsel_port = ctl_base + 0x020;
+ int is_slave = (&hwif->drives[1] == drive);
+ int offset, idx;
+ unsigned long reg;
+ unsigned long jcactsel;
+
+ reg = in_be32((void __iomem *)cckctrl_port);
+ if (reg & CCKCTRL_ATACLKOEN) {
+ offset = 1; /* 133MHz */
+ } else {
+ offset = 0; /* 100MHz */
+ }
+
+ switch (speed) {
+ case XFER_UDMA_6:
+ idx = 6;
+ break;
+ case XFER_UDMA_5:
+ idx = 5;
+ break;
+ case XFER_UDMA_4:
+ idx = 4;
+ break;
+ case XFER_UDMA_3:
+ idx = 3;
+ break;
+ case XFER_UDMA_2:
+ idx = 2;
+ break;
+ case XFER_UDMA_1:
+ idx = 1;
+ break;
+ case XFER_UDMA_0:
+ idx = 0;
+ break;
+ default:
+ return 1;
+ }
+
+ jcactsel = JCACTSELtbl[offset][idx];
+ if (is_slave) {
+ out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
+ jcactsel = jcactsel << 2;
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
+ } else {
+ out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
+ out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
+ out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
+ }
+ reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
+ out_be32((void __iomem *)udenvt_port, reg);
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+/**
+ * scc_config_chipset_for_dma - configure for DMA
+ * @drive: drive to configure
+ *
+ * Called by scc_config_drive_for_dma().
+ */
+
+static int scc_config_chipset_for_dma(ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
+
+ if (!speed)
+ return 0;
+
+ if (scc_tune_chipset(drive, speed))
+ return 0;
+
+ return ide_dma_enable(drive);
+}
+
+/**
+ * scc_configure_drive_for_dma - set up for DMA transfers
+ * @drive: drive we are going to set up
+ *
+ * Set up the drive for DMA, tune the controller and drive as
+ * required.
+ * If the drive isn't suitable for DMA or we hit other problems
+ * then we will drop down to PIO and set up PIO appropriately.
+ * (return 1)
+ */
+
+static int scc_config_drive_for_dma(ide_drive_t *drive)
+{
+ if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
+ return 0;
+
+ if (ide_use_fast_pio(drive))
+ scc_tuneproc(drive, 4);
+
+ return -1;
+}
+
+/**
+ * scc_ide_dma_setup - begin a DMA phase
+ * @drive: target device
+ *
+ * Build an IDE DMA PRD (IDE speak for scatter gather table)
+ * and then set up the DMA transfer registers.
+ *
+ * Returns 0 on success. If a PIO fallback is required then 1
+ * is returned.
+ */
+
+static int scc_dma_setup(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = HWGROUP(drive)->rq;
+ unsigned int reading;
+ u8 dma_stat;
+
+ if (rq_data_dir(rq))
+ reading = 0;
+ else
+ reading = 1 << 3;
+
+ /* fall back to pio! */
+ if (!ide_build_dmatable(drive, rq)) {
+ ide_map_sg(drive, rq);
+ return 1;
+ }
+
+ /* PRD table */
+ out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
+
+ /* specify r/w */
+ out_be32((void __iomem *)hwif->dma_command, reading);
+
+ /* read dma_status for INTR & ERROR flags */
+ dma_stat = in_be32((void __iomem *)hwif->dma_status);
+
+ /* clear INTR & ERROR flags */
+ out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
+ drive->waiting_for_dma = 1;
+ return 0;
+}
+
+
+/**
+ * scc_ide_dma_end - Stop DMA
+ * @drive: IDE drive
+ *
+ * Check and clear INT Status register.
+ * Then call __ide_dma_end().
+ */
+
+static int scc_ide_dma_end(ide_drive_t * drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long intsts_port = hwif->dma_base + 0x014;
+ u32 reg;
+
+ while (1) {
+ reg = in_be32((void __iomem *)intsts_port);
+
+ if (reg & INTSTS_SERROR) {
+ printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_PRERR) {
+ u32 maea0, maec0;
+ unsigned long ctl_base = hwif->config_data;
+
+ maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
+ maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
+
+ printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
+
+ out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_RERR) {
+ printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
+
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+ continue;
+ }
+
+ if (reg & INTSTS_ICERR) {
+ out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
+
+ printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
+ continue;
+ }
+
+ if (reg & INTSTS_BMSINT) {
+ printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
+ out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
+
+ ide_do_reset(drive);
+ continue;
+ }
+
+ if (reg & INTSTS_BMHE) {
+ out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
+ continue;
+ }
+
+ if (reg & INTSTS_ACTEINT) {
+ out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
+ continue;
+ }
+
+ if (reg & INTSTS_IOIRQS) {
+ out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
+ continue;
+ }
+ break;
+ }
+
+ return __ide_dma_end(drive);
+}
+
+/* returns 1 if dma irq issued, 0 otherwise */
+static int scc_dma_test_irq(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u8 dma_stat = hwif->INB(hwif->dma_status);
+
+ /* return 1 if INTR asserted */
+ if ((dma_stat & 4) == 4)
+ return 1;
+
+ /* Workaround for PTERADD: emulate DMA_INTR when
+ * - IDE_STATUS[ERR] = 1
+ * - INT_STATUS[INTRQ] = 1
+ * - DMA_STATUS[IORACTA] = 1
+ */
+ if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
+ in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
+ dma_stat & 1)
+ return 1;
+
+ if (!drive->waiting_for_dma)
+ printk(KERN_WARNING "%s: (%s) called while not waiting\n",
+ drive->name, __FUNCTION__);
+ return 0;
+}
+
+/**
+ * setup_mmio_scc - map CTRL/BMID region
+ * @dev: PCI device we are configuring
+ * @name: device name
+ *
+ */
+
+static int setup_mmio_scc (struct pci_dev *dev, const char *name)
+{
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+ void *ctl_addr;
+ void *dma_addr;
+ int i;
+
+ for (i = 0; i < MAX_HWIFS; i++) {
+ if (scc_ports[i].ctl == 0)
+ break;
+ }
+ if (i >= MAX_HWIFS)
+ return -ENOMEM;
+
+ if (!request_mem_region(ctl_base, ctl_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_0;
+ }
+
+ if (!request_mem_region(dma_base, dma_size, name)) {
+ printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
+ goto fail_1;
+ }
+
+ if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
+ goto fail_2;
+
+ if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
+ goto fail_3;
+
+ pci_set_master(dev);
+ scc_ports[i].ctl = (unsigned long)ctl_addr;
+ scc_ports[i].dma = (unsigned long)dma_addr;
+ pci_set_drvdata(dev, (void *) &scc_ports[i]);
+
+ return 1;
+
+ fail_3:
+ iounmap(ctl_addr);
+ fail_2:
+ release_mem_region(dma_base, dma_size);
+ fail_1:
+ release_mem_region(ctl_base, ctl_size);
+ fail_0:
+ return -ENOMEM;
+}
+
+/**
+ * init_setup_scc - set up an SCC PATA Controller
+ * @dev: PCI device
+ * @d: IDE PCI device
+ *
+ * Perform the initial set up for this device.
+ */
+
+static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ unsigned long ctl_base;
+ unsigned long dma_base;
+ unsigned long cckctrl_port;
+ unsigned long intmask_port;
+ unsigned long mode_port;
+ unsigned long ecmode_port;
+ unsigned long dma_status_port;
+ u32 reg = 0;
+ struct scc_ports *ports;
+ int rc;
+
+ rc = setup_mmio_scc(dev, d->name);
+ if (rc < 0) {
+ return rc;
+ }
+
+ ports = pci_get_drvdata(dev);
+ ctl_base = ports->ctl;
+ dma_base = ports->dma;
+ cckctrl_port = ctl_base + 0xff0;
+ intmask_port = dma_base + 0x010;
+ mode_port = ctl_base + 0x024;
+ ecmode_port = ctl_base + 0xf00;
+ dma_status_port = dma_base + 0x004;
+
+ /* controller initialization */
+ reg = 0;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_ATACLKOEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
+ out_be32((void*)cckctrl_port, reg);
+ reg |= CCKCTRL_CRST;
+ out_be32((void*)cckctrl_port, reg);
+
+ for (;;) {
+ reg = in_be32((void*)cckctrl_port);
+ if (reg & CCKCTRL_CRST)
+ break;
+ udelay(5000);
+ }
+
+ reg |= CCKCTRL_ATARESET;
+ out_be32((void*)cckctrl_port, reg);
+
+ out_be32((void*)ecmode_port, ECMODE_VALUE);
+ out_be32((void*)mode_port, MODE_JCUSFEN);
+ out_be32((void*)intmask_port, INTMASK_MSK);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+/**
+ * init_mmio_iops_scc - set up the iops for MMIO
+ * @hwif: interface to set up
+ *
+ */
+
+static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ unsigned long dma_base = ports->dma;
+
+ ide_set_hwifdata(hwif, ports);
+
+ hwif->INB = scc_ide_inb;
+ hwif->INW = scc_ide_inw;
+ hwif->INSW = scc_ide_insw;
+ hwif->INSL = scc_ide_insl;
+ hwif->OUTB = scc_ide_outb;
+ hwif->OUTBSYNC = scc_ide_outbsync;
+ hwif->OUTW = scc_ide_outw;
+ hwif->OUTSW = scc_ide_outsw;
+ hwif->OUTSL = scc_ide_outsl;
+
+ hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
+ hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
+ hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
+ hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
+ hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
+ hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
+ hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
+ hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
+ hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
+
+ hwif->irq = hwif->pci_dev->irq;
+ hwif->dma_base = dma_base;
+ hwif->config_data = ports->ctl;
+ hwif->mmio = 1;
+}
+
+/**
+ * init_iops_scc - set up iops
+ * @hwif: interface to set up
+ *
+ * Do the basic setup for the SCC hardware interface
+ * and then do the MMIO setup.
+ */
+
+static void __devinit init_iops_scc(ide_hwif_t *hwif)
+{
+ struct pci_dev *dev = hwif->pci_dev;
+ hwif->hwif_data = NULL;
+ if (pci_get_drvdata(dev) == NULL)
+ return;
+ init_mmio_iops_scc(hwif);
+}
+
+/**
+ * init_hwif_scc - set up hwif
+ * @hwif: interface to set up
+ *
+ * We do the basic set up of the interface structure. The SCC
+ * requires several custom handlers so we override the default
+ * ide DMA handlers appropriately.
+ */
+
+static void __devinit init_hwif_scc(ide_hwif_t *hwif)
+{
+ struct scc_ports *ports = ide_get_hwifdata(hwif);
+
+ ports->hwif_id = hwif->index;
+
+ hwif->dma_command = hwif->dma_base;
+ hwif->dma_status = hwif->dma_base + 0x04;
+ hwif->dma_prdtable = hwif->dma_base + 0x08;
+
+ /* PTERADD */
+ out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
+
+ hwif->dma_setup = scc_dma_setup;
+ hwif->ide_dma_end = scc_ide_dma_end;
+ hwif->speedproc = scc_tune_chipset;
+ hwif->tuneproc = scc_tuneproc;
+ hwif->ide_dma_check = scc_config_drive_for_dma;
+ hwif->ide_dma_test_irq = scc_dma_test_irq;
+
+ hwif->drives[0].autotune = IDE_TUNE_AUTO;
+ hwif->drives[1].autotune = IDE_TUNE_AUTO;
+
+ if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) {
+ hwif->ultra_mask = 0x7f; /* 133MHz */
+ } else {
+ hwif->ultra_mask = 0x3f; /* 100MHz */
+ }
+ hwif->mwdma_mask = 0x00;
+ hwif->swdma_mask = 0x00;
+ hwif->atapi_dma = 1;
+
+ /* we support 80c cable only. */
+ hwif->udma_four = 1;
+
+ hwif->autodma = 0;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_SCC_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_setup = init_setup_scc, \
+ .init_iops = init_iops_scc, \
+ .init_hwif = init_hwif_scc, \
+ .channels = 1, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ }
+
+static ide_pci_device_t scc_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_SCC_DEV("sccIDE"),
+};
+
+/**
+ * scc_init_one - pci layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an SCC PATA controller.
+ * We then use the IDE PCI generic helper to do most of the work.
+ */
+
+static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_pci_device_t *d = &scc_chipsets[id->driver_data];
+ return d->init_setup(dev, d);
+}
+
+/**
+ * scc_remove - pci layer remove entry
+ * @dev: PCI device
+ *
+ * Called by the PCI code when it removes an SCC PATA controller.
+ */
+
+static void __devexit scc_remove(struct pci_dev *dev)
+{
+ struct scc_ports *ports = pci_get_drvdata(dev);
+ ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
+ unsigned long ctl_base = pci_resource_start(dev, 0);
+ unsigned long dma_base = pci_resource_start(dev, 1);
+ unsigned long ctl_size = pci_resource_len(dev, 0);
+ unsigned long dma_size = pci_resource_len(dev, 1);
+
+ if (hwif->dmatable_cpu) {
+ pci_free_consistent(hwif->pci_dev,
+ PRD_ENTRIES * PRD_BYTES,
+ hwif->dmatable_cpu,
+ hwif->dmatable_dma);
+ hwif->dmatable_cpu = NULL;
+ }
+
+ ide_unregister(hwif->index);
+
+ hwif->chipset = ide_unknown;
+ iounmap((void*)ports->dma);
+ iounmap((void*)ports->ctl);
+ release_mem_region(dma_base, dma_size);
+ release_mem_region(ctl_base, ctl_size);
+ memset(ports, 0, sizeof(*ports));
+}
+
+static struct pci_device_id scc_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "SCC IDE",
+ .id_table = scc_pci_tbl,
+ .probe = scc_init_one,
+ .remove = scc_remove,
+};
+
+static int scc_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(scc_ide_init);
+/* -- No exit code?
+static void scc_ide_exit(void)
+{
+ ide_pci_unregister_driver(&driver);
+}
+module_exit(scc_ide_exit);
+ */
+
+
+MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ide/pci/siimage.c:
- * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/hdreg.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
-
-#define SCC_PATA_NAME "scc IDE"
-
-#define TDVHSEL_MASTER 0x00000001
-#define TDVHSEL_SLAVE 0x00000004
-
-#define MODE_JCUSFEN 0x00000080
-
-#define CCKCTRL_ATARESET 0x00040000
-#define CCKCTRL_BUFCNT 0x00020000
-#define CCKCTRL_CRST 0x00010000
-#define CCKCTRL_OCLKEN 0x00000100
-#define CCKCTRL_ATACLKOEN 0x00000002
-#define CCKCTRL_LCLKEN 0x00000001
-
-#define QCHCD_IOS_SS 0x00000001
-
-#define QCHSD_STPDIAG 0x00020000
-
-#define INTMASK_MSK 0xD1000012
-#define INTSTS_SERROR 0x80000000
-#define INTSTS_PRERR 0x40000000
-#define INTSTS_RERR 0x10000000
-#define INTSTS_ICERR 0x01000000
-#define INTSTS_BMSINT 0x00000010
-#define INTSTS_BMHE 0x00000008
-#define INTSTS_IOIRQS 0x00000004
-#define INTSTS_INTRQ 0x00000002
-#define INTSTS_ACTEINT 0x00000001
-
-#define ECMODE_VALUE 0x01
-
-static struct scc_ports {
- unsigned long ctl, dma;
- unsigned char hwif_id; /* for removing hwif from system */
-} scc_ports[MAX_HWIFS];
-
-/* PIO transfer mode table */
-/* JCHST */
-static unsigned long JCHSTtbl[2][7] = {
- {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHHT */
-static unsigned long JCHHTtbl[2][7] = {
- {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHCT */
-static unsigned long JCHCTtbl[2][7] = {
- {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
- {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
-};
-
-
-/* DMA transfer mode table */
-/* JCHDCTM/JCHDCTS */
-static unsigned long JCHDCTxtbl[2][7] = {
- {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
- {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS */
-static unsigned long JCSTWTxtbl[2][7] = {
- {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
- {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCTSS */
-static unsigned long JCTSStbl[2][7] = {
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
-};
-
-/* JCENVT */
-static unsigned long JCENVTtbl[2][7] = {
- {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static unsigned long JCACTSELtbl[2][7] = {
- {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
-};
-
-
-static u8 scc_ide_inb(unsigned long port)
-{
- u32 data = in_be32((void*)port);
- return (u8)data;
-}
-
-static u16 scc_ide_inw(unsigned long port)
-{
- u32 data = in_be32((void*)port);
- return (u16)data;
-}
-
-static void scc_ide_insw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_insl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_outb(u8 addr, unsigned long port)
-{
- out_be32((void*)port, addr);
-}
-
-static void scc_ide_outw(u16 addr, unsigned long port)
-{
- out_be32((void*)port, addr);
-}
-
-static void
-scc_ide_outbsync(ide_drive_t * drive, u8 addr, unsigned long port)
-{
- ide_hwif_t *hwif = HWIF(drive);
-
- out_be32((void*)port, addr);
- __asm__ __volatile__("eieio":::"memory");
- in_be32((void*)(hwif->dma_base + 0x01c));
- __asm__ __volatile__("eieio":::"memory");
-}
-
-static void
-scc_ide_outsw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-static void
-scc_ide_outsl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-/**
- * scc_ratemask - Compute available modes
- * @drive: IDE drive
- *
- * Compute the available speeds for the devices on the interface.
- * Enforce UDMA33 as a limit if there is no 80pin cable present.
- */
-
-static u8 scc_ratemask(ide_drive_t *drive)
-{
- u8 mode = 4;
-
- if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
- return mode;
-}
-
-/**
- * scc_tuneproc - tune a drive PIO mode
- * @drive: drive to tune
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void scc_tuneproc(ide_drive_t *drive, byte mode_wanted)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long piosht_port = ctl_base + 0x000;
- unsigned long pioct_port = ctl_base + 0x004;
- unsigned long reg;
- unsigned char speed = XFER_PIO_0;
- int offset;
-
- mode_wanted = ide_get_best_pio_mode(drive, mode_wanted, 4, NULL);
- switch (mode_wanted) {
- case 4:
- speed = XFER_PIO_4;
- break;
- case 3:
- speed = XFER_PIO_3;
- break;
- case 2:
- speed = XFER_PIO_2;
- break;
- case 1:
- speed = XFER_PIO_1;
- break;
- case 0:
- default:
- speed = XFER_PIO_0;
- break;
- }
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
- reg = JCHSTtbl[offset][mode_wanted] << 16 | JCHHTtbl[offset][mode_wanted];
- out_be32((void __iomem *)piosht_port, reg);
- reg = JCHCTtbl[offset][mode_wanted];
- out_be32((void __iomem *)pioct_port, reg);
-
- ide_config_drive_speed(drive, speed);
-}
-
-/**
- * scc_tune_chipset - tune a drive DMA mode
- * @drive: Drive to set up
- * @xferspeed: speed we want to achieve
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static int scc_tune_chipset(ide_drive_t *drive, byte xferspeed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 speed = ide_rate_filter(scc_ratemask(drive), xferspeed);
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long mdmact_port = ctl_base + 0x008;
- unsigned long mcrcst_port = ctl_base + 0x00c;
- unsigned long sdmact_port = ctl_base + 0x010;
- unsigned long scrcst_port = ctl_base + 0x014;
- unsigned long udenvt_port = ctl_base + 0x018;
- unsigned long tdvhsel_port = ctl_base + 0x020;
- int is_slave = (&hwif->drives[1] == drive);
- int offset, idx;
- unsigned long reg;
- unsigned long jcactsel;
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
-
- switch (speed) {
- case XFER_UDMA_6:
- idx = 6;
- break;
- case XFER_UDMA_5:
- idx = 5;
- break;
- case XFER_UDMA_4:
- idx = 4;
- break;
- case XFER_UDMA_3:
- idx = 3;
- break;
- case XFER_UDMA_2:
- idx = 2;
- break;
- case XFER_UDMA_1:
- idx = 1;
- break;
- case XFER_UDMA_0:
- idx = 0;
- break;
- default:
- return 1;
- }
-
- jcactsel = JCACTSELtbl[offset][idx];
- if (is_slave) {
- out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
- jcactsel = jcactsel << 2;
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
- } else {
- out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
- }
- reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
- out_be32((void __iomem *)udenvt_port, reg);
-
- return ide_config_drive_speed(drive, speed);
-}
-
-/**
- * scc_config_chipset_for_dma - configure for DMA
- * @drive: drive to configure
- *
- * Called by scc_config_drive_for_dma().
- */
-
-static int scc_config_chipset_for_dma(ide_drive_t *drive)
-{
- u8 speed = ide_dma_speed(drive, scc_ratemask(drive));
-
- if (!speed)
- return 0;
-
- if (scc_tune_chipset(drive, speed))
- return 0;
-
- return ide_dma_enable(drive);
-}
-
-/**
- * scc_configure_drive_for_dma - set up for DMA transfers
- * @drive: drive we are going to set up
- *
- * Set up the drive for DMA, tune the controller and drive as
- * required.
- * If the drive isn't suitable for DMA or we hit other problems
- * then we will drop down to PIO and set up PIO appropriately.
- * (return 1)
- */
-
-static int scc_config_drive_for_dma(ide_drive_t *drive)
-{
- if (ide_use_dma(drive) && scc_config_chipset_for_dma(drive))
- return 0;
-
- if (ide_use_fast_pio(drive))
- scc_tuneproc(drive, 4);
-
- return -1;
-}
-
-/**
- * scc_ide_dma_setup - begin a DMA phase
- * @drive: target device
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers.
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-static int scc_dma_setup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned int reading;
- u8 dma_stat;
-
- if (rq_data_dir(rq))
- reading = 0;
- else
- reading = 1 << 3;
-
- /* fall back to pio! */
- if (!ide_build_dmatable(drive, rq)) {
- ide_map_sg(drive, rq);
- return 1;
- }
-
- /* PRD table */
- out_be32((void __iomem *)hwif->dma_prdtable, hwif->dmatable_dma);
-
- /* specify r/w */
- out_be32((void __iomem *)hwif->dma_command, reading);
-
- /* read dma_status for INTR & ERROR flags */
- dma_stat = in_be32((void __iomem *)hwif->dma_status);
-
- /* clear INTR & ERROR flags */
- out_be32((void __iomem *)hwif->dma_status, dma_stat|6);
- drive->waiting_for_dma = 1;
- return 0;
-}
-
-
-/**
- * scc_ide_dma_end - Stop DMA
- * @drive: IDE drive
- *
- * Check and clear INT Status register.
- * Then call __ide_dma_end().
- */
-
-static int scc_ide_dma_end(ide_drive_t * drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long intsts_port = hwif->dma_base + 0x014;
- u32 reg;
-
- while (1) {
- reg = in_be32((void __iomem *)intsts_port);
-
- if (reg & INTSTS_SERROR) {
- printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
-
- out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_PRERR) {
- u32 maea0, maec0;
- unsigned long ctl_base = hwif->config_data;
-
- maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
- maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
-
- printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
-
- out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
-
- out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_RERR) {
- printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
-
- out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_ICERR) {
- out_be32((void __iomem *)hwif->dma_command, in_be32((void __iomem *)hwif->dma_command) & ~QCHCD_IOS_SS);
-
- printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
- continue;
- }
-
- if (reg & INTSTS_BMSINT) {
- printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
-
- ide_do_reset(drive);
- continue;
- }
-
- if (reg & INTSTS_BMHE) {
- out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
- continue;
- }
-
- if (reg & INTSTS_ACTEINT) {
- out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
- continue;
- }
-
- if (reg & INTSTS_IOIRQS) {
- out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
- continue;
- }
- break;
- }
-
- return __ide_dma_end(drive);
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int scc_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->INB(hwif->dma_status);
-
- /* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
- return 1;
-
- /* Workaround for PTERADD: emulate DMA_INTR when
- * - IDE_STATUS[ERR] = 1
- * - INT_STATUS[INTRQ] = 1
- * - DMA_STATUS[IORACTA] = 1
- */
- if (in_be32((void __iomem *)IDE_ALTSTATUS_REG) & ERR_STAT &&
- in_be32((void __iomem *)(hwif->dma_base + 0x014)) & INTSTS_INTRQ &&
- dma_stat & 1)
- return 1;
-
- if (!drive->waiting_for_dma)
- printk(KERN_WARNING "%s: (%s) called while not waiting\n",
- drive->name, __FUNCTION__);
- return 0;
-}
-
-/**
- * setup_mmio_scc - map CTRL/BMID region
- * @dev: PCI device we are configuring
- * @name: device name
- *
- */
-
-static int setup_mmio_scc (struct pci_dev *dev, const char *name)
-{
- unsigned long ctl_base = pci_resource_start(dev, 0);
- unsigned long dma_base = pci_resource_start(dev, 1);
- unsigned long ctl_size = pci_resource_len(dev, 0);
- unsigned long dma_size = pci_resource_len(dev, 1);
- void *ctl_addr;
- void *dma_addr;
- int i;
-
- for (i = 0; i < MAX_HWIFS; i++) {
- if (scc_ports[i].ctl == 0)
- break;
- }
- if (i >= MAX_HWIFS)
- return -ENOMEM;
-
- if (!request_mem_region(ctl_base, ctl_size, name)) {
- printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
- goto fail_0;
- }
-
- if (!request_mem_region(dma_base, dma_size, name)) {
- printk(KERN_WARNING "%s: IDE controller MMIO ports not available.\n", SCC_PATA_NAME);
- goto fail_1;
- }
-
- if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
- goto fail_2;
-
- if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
- goto fail_3;
-
- pci_set_master(dev);
- scc_ports[i].ctl = (unsigned long)ctl_addr;
- scc_ports[i].dma = (unsigned long)dma_addr;
- pci_set_drvdata(dev, (void *) &scc_ports[i]);
-
- return 1;
-
- fail_3:
- iounmap(ctl_addr);
- fail_2:
- release_mem_region(dma_base, dma_size);
- fail_1:
- release_mem_region(ctl_base, ctl_size);
- fail_0:
- return -ENOMEM;
-}
-
-/**
- * init_setup_scc - set up an SCC PATA Controller
- * @dev: PCI device
- * @d: IDE PCI device
- *
- * Perform the initial set up for this device.
- */
-
-static int __devinit init_setup_scc(struct pci_dev *dev, ide_pci_device_t *d)
-{
- unsigned long ctl_base;
- unsigned long dma_base;
- unsigned long cckctrl_port;
- unsigned long intmask_port;
- unsigned long mode_port;
- unsigned long ecmode_port;
- unsigned long dma_status_port;
- u32 reg = 0;
- struct scc_ports *ports;
- int rc;
-
- rc = setup_mmio_scc(dev, d->name);
- if (rc < 0) {
- return rc;
- }
-
- ports = pci_get_drvdata(dev);
- ctl_base = ports->ctl;
- dma_base = ports->dma;
- cckctrl_port = ctl_base + 0xff0;
- intmask_port = dma_base + 0x010;
- mode_port = ctl_base + 0x024;
- ecmode_port = ctl_base + 0xf00;
- dma_status_port = dma_base + 0x004;
-
- /* controller initialization */
- reg = 0;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_ATACLKOEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_CRST;
- out_be32((void*)cckctrl_port, reg);
-
- for (;;) {
- reg = in_be32((void*)cckctrl_port);
- if (reg & CCKCTRL_CRST)
- break;
- udelay(5000);
- }
-
- reg |= CCKCTRL_ATARESET;
- out_be32((void*)cckctrl_port, reg);
-
- out_be32((void*)ecmode_port, ECMODE_VALUE);
- out_be32((void*)mode_port, MODE_JCUSFEN);
- out_be32((void*)intmask_port, INTMASK_MSK);
-
- return ide_setup_pci_device(dev, d);
-}
-
-/**
- * init_mmio_iops_scc - set up the iops for MMIO
- * @hwif: interface to set up
- *
- */
-
-static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = hwif->pci_dev;
- struct scc_ports *ports = pci_get_drvdata(dev);
- unsigned long dma_base = ports->dma;
-
- ide_set_hwifdata(hwif, ports);
-
- hwif->INB = scc_ide_inb;
- hwif->INW = scc_ide_inw;
- hwif->INSW = scc_ide_insw;
- hwif->INSL = scc_ide_insl;
- hwif->OUTB = scc_ide_outb;
- hwif->OUTBSYNC = scc_ide_outbsync;
- hwif->OUTW = scc_ide_outw;
- hwif->OUTSW = scc_ide_outsw;
- hwif->OUTSL = scc_ide_outsl;
-
- hwif->io_ports[IDE_DATA_OFFSET] = dma_base + 0x20;
- hwif->io_ports[IDE_ERROR_OFFSET] = dma_base + 0x24;
- hwif->io_ports[IDE_NSECTOR_OFFSET] = dma_base + 0x28;
- hwif->io_ports[IDE_SECTOR_OFFSET] = dma_base + 0x2c;
- hwif->io_ports[IDE_LCYL_OFFSET] = dma_base + 0x30;
- hwif->io_ports[IDE_HCYL_OFFSET] = dma_base + 0x34;
- hwif->io_ports[IDE_SELECT_OFFSET] = dma_base + 0x38;
- hwif->io_ports[IDE_STATUS_OFFSET] = dma_base + 0x3c;
- hwif->io_ports[IDE_CONTROL_OFFSET] = dma_base + 0x40;
-
- hwif->irq = hwif->pci_dev->irq;
- hwif->dma_base = dma_base;
- hwif->config_data = ports->ctl;
- hwif->mmio = 1;
-}
-
-/**
- * init_iops_scc - set up iops
- * @hwif: interface to set up
- *
- * Do the basic setup for the SCC hardware interface
- * and then do the MMIO setup.
- */
-
-static void __devinit init_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = hwif->pci_dev;
- hwif->hwif_data = NULL;
- if (pci_get_drvdata(dev) == NULL)
- return;
- init_mmio_iops_scc(hwif);
-}
-
-/**
- * init_hwif_scc - set up hwif
- * @hwif: interface to set up
- *
- * We do the basic set up of the interface structure. The SCC
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately.
- */
-
-static void __devinit init_hwif_scc(ide_hwif_t *hwif)
-{
- struct scc_ports *ports = ide_get_hwifdata(hwif);
-
- ports->hwif_id = hwif->index;
-
- hwif->dma_command = hwif->dma_base;
- hwif->dma_status = hwif->dma_base + 0x04;
- hwif->dma_prdtable = hwif->dma_base + 0x08;
-
- /* PTERADD */
- out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
-
- hwif->dma_setup = scc_dma_setup;
- hwif->ide_dma_end = scc_ide_dma_end;
- hwif->speedproc = scc_tune_chipset;
- hwif->tuneproc = scc_tuneproc;
- hwif->ide_dma_check = scc_config_drive_for_dma;
- hwif->ide_dma_test_irq = scc_dma_test_irq;
-
- hwif->drives[0].autotune = IDE_TUNE_AUTO;
- hwif->drives[1].autotune = IDE_TUNE_AUTO;
-
- if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN) {
- hwif->ultra_mask = 0x7f; /* 133MHz */
- } else {
- hwif->ultra_mask = 0x3f; /* 100MHz */
- }
- hwif->mwdma_mask = 0x00;
- hwif->swdma_mask = 0x00;
- hwif->atapi_dma = 1;
-
- /* we support 80c cable only. */
- hwif->udma_four = 1;
-
- hwif->autodma = 0;
- if (!noautodma)
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
-}
-
-#define DECLARE_SCC_DEV(name_str) \
- { \
- .name = name_str, \
- .init_setup = init_setup_scc, \
- .init_iops = init_iops_scc, \
- .init_hwif = init_hwif_scc, \
- .channels = 1, \
- .autodma = AUTODMA, \
- .bootable = ON_BOARD, \
- }
-
-static ide_pci_device_t scc_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_SCC_DEV("sccIDE"),
-};
-
-/**
- * scc_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an SCC PATA controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- ide_pci_device_t *d = &scc_chipsets[id->driver_data];
- return d->init_setup(dev, d);
-}
-
-/**
- * scc_remove - pci layer remove entry
- * @dev: PCI device
- *
- * Called by the PCI code when it removes an SCC PATA controller.
- */
-
-static void __devexit scc_remove(struct pci_dev *dev)
-{
- struct scc_ports *ports = pci_get_drvdata(dev);
- ide_hwif_t *hwif = &ide_hwifs[ports->hwif_id];
- unsigned long ctl_base = pci_resource_start(dev, 0);
- unsigned long dma_base = pci_resource_start(dev, 1);
- unsigned long ctl_size = pci_resource_len(dev, 0);
- unsigned long dma_size = pci_resource_len(dev, 1);
-
- if (hwif->dmatable_cpu) {
- pci_free_consistent(hwif->pci_dev,
- PRD_ENTRIES * PRD_BYTES,
- hwif->dmatable_cpu,
- hwif->dmatable_dma);
- hwif->dmatable_cpu = NULL;
- }
-
- ide_unregister(hwif->index);
-
- hwif->chipset = ide_unknown;
- iounmap((void*)ports->dma);
- iounmap((void*)ports->ctl);
- release_mem_region(dma_base, dma_size);
- release_mem_region(ctl_base, ctl_size);
- memset(ports, 0, sizeof(*ports));
-}
-
-static struct pci_device_id scc_pci_tbl[] = {
- { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-
-static struct pci_driver driver = {
- .name = "SCC IDE",
- .id_table = scc_pci_tbl,
- .probe = scc_init_one,
- .remove = scc_remove,
-};
-
-static int scc_ide_init(void)
-{
- return ide_pci_register_driver(&driver);
-}
-
-module_init(scc_ide_init);
-/* -- No exit code?
-static void scc_ide_exit(void)
-{
- ide_pci_unregister_driver(&driver);
-}
-module_exit(scc_ide_exit);
- */
-
-
-MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
-MODULE_LICENSE("GPL");
projects / powerpc.git / commitdiff