#include <linux/pci.h>
#include <linux/ioport.h>
#include <linux/notifier.h>
+#include <linux/mutex.h>
#include <linux/kthread.h>
#include <asm/irq.h>
#ifdef CONFIG_HIGH_RES_TIMERS
enum si_type {
SI_KCS, SI_SMIC, SI_BT
};
+static char *si_to_str[] = { "KCS", "SMIC", "BT" };
struct ipmi_device_id {
unsigned char device_id;
int (*irq_setup)(struct smi_info *info);
void (*irq_cleanup)(struct smi_info *info);
unsigned int io_size;
+ char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */
+ void (*addr_source_cleanup)(struct smi_info *info);
+ void *addr_source_data;
/* Per-OEM handler, called from handle_flags().
Returns 1 when handle_flags() needs to be re-run
unsigned long incoming_messages;
struct task_struct *thread;
+
+ struct list_head link;
};
+static int try_smi_init(struct smi_info *smi);
+
static struct notifier_block *xaction_notifier_list;
static int register_xaction_notifier(struct notifier_block * nb)
{
spin_lock(&(smi_info->msg_lock));
/* Pick the high priority queue first. */
- if (! list_empty(&(smi_info->hp_xmit_msgs))) {
+ if (!list_empty(&(smi_info->hp_xmit_msgs))) {
entry = smi_info->hp_xmit_msgs.next;
- } else if (! list_empty(&(smi_info->xmit_msgs))) {
+ } else if (!list_empty(&(smi_info->xmit_msgs))) {
entry = smi_info->xmit_msgs.next;
}
- if (! entry) {
+ if (!entry) {
smi_info->curr_msg = NULL;
rv = SI_SM_IDLE;
} else {
memory, we will re-enable the interrupt. */
static inline void disable_si_irq(struct smi_info *smi_info)
{
- if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
+ if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
disable_irq_nosync(smi_info->irq);
smi_info->interrupt_disabled = 1;
}
} else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) {
/* Messages available. */
smi_info->curr_msg = ipmi_alloc_smi_msg();
- if (! smi_info->curr_msg) {
+ if (!smi_info->curr_msg) {
disable_si_irq(smi_info);
smi_info->si_state = SI_NORMAL;
return;
} else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) {
/* Events available. */
smi_info->curr_msg = ipmi_alloc_smi_msg();
- if (! smi_info->curr_msg) {
+ if (!smi_info->curr_msg) {
disable_si_irq(smi_info);
smi_info->si_state = SI_NORMAL;
return;
#endif
switch (smi_info->si_state) {
case SI_NORMAL:
- if (! smi_info->curr_msg)
+ if (!smi_info->curr_msg)
break;
smi_info->curr_msg->rsp_size
smi_info->last_timeout_jiffies = jiffies_now;
- if ((smi_info->irq) && (! smi_info->interrupt_disabled)) {
+ if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
/* Running with interrupts, only do long timeouts. */
smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES;
spin_lock_irqsave(&smi_info->count_lock, flags);
a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */
#define SI_MAX_PARMS 4
-#define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2)
-static struct smi_info *smi_infos[SI_MAX_DRIVERS] =
-{ NULL, NULL, NULL, NULL };
+static LIST_HEAD(smi_infos);
+static DECLARE_MUTEX(smi_infos_lock);
+static int smi_num; /* Used to sequence the SMIs */
#define DEVICE_NAME "ipmi_si"
-#define DEFAULT_KCS_IO_PORT 0xca2
-#define DEFAULT_SMIC_IO_PORT 0xca9
-#define DEFAULT_BT_IO_PORT 0xe4
#define DEFAULT_REGSPACING 1
static int si_trydefaults = 1;
" by interface number.");
+#define IPMI_IO_ADDR_SPACE 0
#define IPMI_MEM_ADDR_SPACE 1
-#define IPMI_IO_ADDR_SPACE 2
+static char *addr_space_to_str[] = { "I/O", "memory" };
-#if defined(CONFIG_ACPI) || defined(CONFIG_DMI) || defined(CONFIG_PCI)
-static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr)
+static void std_irq_cleanup(struct smi_info *info)
{
- int i;
-
- for (i = 0; i < SI_MAX_PARMS; ++i) {
- /* Don't check our address. */
- if (i == intf)
- continue;
- if (si_type[i] != NULL) {
- if ((addr_space == IPMI_MEM_ADDR_SPACE &&
- base_addr == addrs[i]) ||
- (addr_space == IPMI_IO_ADDR_SPACE &&
- base_addr == ports[i]))
- return 0;
- }
- else
- break;
- }
-
- return 1;
+ if (info->si_type == SI_BT)
+ /* Disable the interrupt in the BT interface. */
+ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
+ free_irq(info->irq, info);
}
-#endif
static int std_irq_setup(struct smi_info *info)
{
int rv;
- if (! info->irq)
+ if (!info->irq)
return 0;
if (info->si_type == SI_BT) {
SA_INTERRUPT,
DEVICE_NAME,
info);
- if (! rv)
+ if (!rv)
/* Enable the interrupt in the BT interface. */
info->io.outputb(&info->io, IPMI_BT_INTMASK_REG,
IPMI_BT_INTMASK_ENABLE_IRQ_BIT);
DEVICE_NAME, info->irq);
info->irq = 0;
} else {
+ info->irq_cleanup = std_irq_cleanup;
printk(" Using irq %d\n", info->irq);
}
return rv;
}
-static void std_irq_cleanup(struct smi_info *info)
-{
- if (! info->irq)
- return;
-
- if (info->si_type == SI_BT)
- /* Disable the interrupt in the BT interface. */
- info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0);
- free_irq(info->irq, info);
-}
-
static unsigned char port_inb(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return inb((*addr)+(offset*io->regspacing));
+ return inb(addr + (offset * io->regspacing));
}
static void port_outb(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outb(b, (*addr)+(offset * io->regspacing));
+ outb(b, addr + (offset * io->regspacing));
}
static unsigned char port_inw(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
+ return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
}
static void port_outw(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outw(b << io->regshift, (*addr)+(offset * io->regspacing));
+ outw(b << io->regshift, addr + (offset * io->regspacing));
}
static unsigned char port_inl(struct si_sm_io *io, unsigned int offset)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff;
+ return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff;
}
static void port_outl(struct si_sm_io *io, unsigned int offset,
unsigned char b)
{
- unsigned int *addr = io->info;
+ unsigned int addr = io->addr_data;
- outl(b << io->regshift, (*addr)+(offset * io->regspacing));
+ outl(b << io->regshift, addr+(offset * io->regspacing));
}
static void port_cleanup(struct smi_info *info)
{
- unsigned int *addr = info->io.info;
- int mapsize;
+ unsigned int addr = info->io.addr_data;
+ int mapsize;
- if (addr && (*addr)) {
+ if (addr) {
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- release_region (*addr, mapsize);
+ release_region (addr, mapsize);
}
kfree(info);
}
static int port_setup(struct smi_info *info)
{
- unsigned int *addr = info->io.info;
- int mapsize;
+ unsigned int addr = info->io.addr_data;
+ int mapsize;
- if (! addr || (! *addr))
+ if (!addr)
return -ENODEV;
info->io_cleanup = port_cleanup;
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- if (request_region(*addr, mapsize, DEVICE_NAME) == NULL)
+ if (request_region(addr, mapsize, DEVICE_NAME) == NULL)
return -EIO;
return 0;
}
-static int try_init_port(int intf_num, struct smi_info **new_info)
-{
- struct smi_info *info;
-
- if (! ports[intf_num])
- return -ENODEV;
-
- if (! is_new_interface(intf_num, IPMI_IO_ADDR_SPACE,
- ports[intf_num]))
- return -ENODEV;
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n");
- return -ENOMEM;
- }
- memset(info, 0, sizeof(*info));
-
- info->io_setup = port_setup;
- info->io.info = &(ports[intf_num]);
- info->io.addr = NULL;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = regsizes[intf_num];
- if (! info->io.regsize)
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
- info->irq = 0;
- info->irq_setup = NULL;
- *new_info = info;
-
- if (si_type[intf_num] == NULL)
- si_type[intf_num] = "kcs";
-
- printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n",
- si_type[intf_num], ports[intf_num]);
- return 0;
-}
-
static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset)
{
return readb((io->addr)+(offset * io->regspacing));
static void mem_cleanup(struct smi_info *info)
{
- unsigned long *addr = info->io.info;
+ unsigned long addr = info->io.addr_data;
int mapsize;
if (info->io.addr) {
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- release_mem_region(*addr, mapsize);
+ release_mem_region(addr, mapsize);
}
kfree(info);
}
static int mem_setup(struct smi_info *info)
{
- unsigned long *addr = info->io.info;
+ unsigned long addr = info->io.addr_data;
int mapsize;
- if (! addr || (! *addr))
+ if (!addr)
return -ENODEV;
info->io_cleanup = mem_cleanup;
mapsize = ((info->io_size * info->io.regspacing)
- (info->io.regspacing - info->io.regsize));
- if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL)
+ if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL)
return -EIO;
- info->io.addr = ioremap(*addr, mapsize);
+ info->io.addr = ioremap(addr, mapsize);
if (info->io.addr == NULL) {
- release_mem_region(*addr, mapsize);
+ release_mem_region(addr, mapsize);
return -EIO;
}
return 0;
}
-static int try_init_mem(int intf_num, struct smi_info **new_info)
+
+static __devinit void hardcode_find_bmc(void)
{
+ int i;
struct smi_info *info;
- if (! addrs[intf_num])
- return -ENODEV;
+ for (i = 0; i < SI_MAX_PARMS; i++) {
+ if (!ports[i] && !addrs[i])
+ continue;
- if (! is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE,
- addrs[intf_num]))
- return -ENODEV;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n");
- return -ENOMEM;
- }
- memset(info, 0, sizeof(*info));
+ info->addr_source = "hardcoded";
- info->io_setup = mem_setup;
- info->io.info = &addrs[intf_num];
- info->io.addr = NULL;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
- info->io.regsize = regsizes[intf_num];
- if (! info->io.regsize)
- info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
- info->irq = 0;
- info->irq_setup = NULL;
- *new_info = info;
+ if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) {
+ info->si_type = SI_KCS;
+ } else if (strcmp(si_type[i], "smic") == 0) {
+ info->si_type = SI_SMIC;
+ } else if (strcmp(si_type[i], "bt") == 0) {
+ info->si_type = SI_BT;
+ } else {
+ printk(KERN_WARNING
+ "ipmi_si: Interface type specified "
+ "for interface %d, was invalid: %s\n",
+ i, si_type[i]);
+ kfree(info);
+ continue;
+ }
- if (si_type[intf_num] == NULL)
- si_type[intf_num] = "kcs";
+ if (ports[i]) {
+ /* An I/O port */
+ info->io_setup = port_setup;
+ info->io.addr_data = ports[i];
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else if (addrs[i]) {
+ /* A memory port */
+ info->io_setup = mem_setup;
+ info->io.addr_data = addrs[i];
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ } else {
+ printk(KERN_WARNING
+ "ipmi_si: Interface type specified "
+ "for interface %d, "
+ "but port and address were not set or "
+ "set to zero.\n", i);
+ kfree(info);
+ continue;
+ }
- printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n",
- si_type[intf_num], addrs[intf_num]);
- return 0;
-}
+ info->io.addr = NULL;
+ info->io.regspacing = regspacings[i];
+ if (!info->io.regspacing)
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = regsizes[i];
+ if (!info->io.regsize)
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = regshifts[i];
+ info->irq = irqs[i];
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
+ try_smi_init(info);
+ }
+}
#ifdef CONFIG_ACPI
return ACPI_INTERRUPT_HANDLED;
}
+static void acpi_gpe_irq_cleanup(struct smi_info *info)
+{
+ if (!info->irq)
+ return;
+
+ acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
+}
+
static int acpi_gpe_irq_setup(struct smi_info *info)
{
acpi_status status;
- if (! info->irq)
+ if (!info->irq)
return 0;
/* FIXME - is level triggered right? */
info->irq = 0;
return -EINVAL;
} else {
+ info->irq_cleanup = acpi_gpe_irq_cleanup;
printk(" Using ACPI GPE %d\n", info->irq);
return 0;
}
}
-static void acpi_gpe_irq_cleanup(struct smi_info *info)
-{
- if (! info->irq)
- return;
-
- acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe);
-}
-
/*
* Defined at
* http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf
s8 spmi_id[1]; /* A '\0' terminated array starts here. */
};
-static int try_init_acpi(int intf_num, struct smi_info **new_info)
+static __devinit int try_init_acpi(struct SPMITable *spmi)
{
struct smi_info *info;
- acpi_status status;
- struct SPMITable *spmi;
char *io_type;
u8 addr_space;
- if (acpi_disabled)
- return -ENODEV;
-
- if (acpi_failure)
- return -ENODEV;
-
- status = acpi_get_firmware_table("SPMI", intf_num+1,
- ACPI_LOGICAL_ADDRESSING,
- (struct acpi_table_header **) &spmi);
- if (status != AE_OK) {
- acpi_failure = 1;
- return -ENODEV;
- }
-
if (spmi->IPMIlegacy != 1) {
printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy);
return -ENODEV;
addr_space = IPMI_MEM_ADDR_SPACE;
else
addr_space = IPMI_IO_ADDR_SPACE;
- if (! is_new_interface(-1, addr_space, spmi->addr.address))
- return -ENODEV;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
+ return -ENOMEM;
+ }
+
+ info->addr_source = "ACPI";
/* Figure out the interface type. */
switch (spmi->InterfaceType)
{
case 1: /* KCS */
- si_type[intf_num] = "kcs";
+ info->si_type = SI_KCS;
break;
-
case 2: /* SMIC */
- si_type[intf_num] = "smic";
+ info->si_type = SI_SMIC;
break;
-
case 3: /* BT */
- si_type[intf_num] = "bt";
+ info->si_type = SI_BT;
break;
-
default:
printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n",
spmi->InterfaceType);
+ kfree(info);
return -EIO;
}
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n");
- return -ENOMEM;
- }
- memset(info, 0, sizeof(*info));
-
if (spmi->InterruptType & 1) {
/* We've got a GPE interrupt. */
info->irq = spmi->GPE;
info->irq_setup = acpi_gpe_irq_setup;
- info->irq_cleanup = acpi_gpe_irq_cleanup;
} else if (spmi->InterruptType & 2) {
/* We've got an APIC/SAPIC interrupt. */
info->irq = spmi->GlobalSystemInterrupt;
info->irq_setup = std_irq_setup;
- info->irq_cleanup = std_irq_cleanup;
} else {
/* Use the default interrupt setting. */
info->irq = 0;
if (spmi->addr.register_bit_width) {
/* A (hopefully) properly formed register bit width. */
- regspacings[intf_num] = spmi->addr.register_bit_width / 8;
info->io.regspacing = spmi->addr.register_bit_width / 8;
} else {
- regspacings[intf_num] = DEFAULT_REGSPACING;
info->io.regspacing = DEFAULT_REGSPACING;
}
- regsizes[intf_num] = regspacings[intf_num];
- info->io.regsize = regsizes[intf_num];
- regshifts[intf_num] = spmi->addr.register_bit_offset;
- info->io.regshift = regshifts[intf_num];
+ info->io.regsize = info->io.regspacing;
+ info->io.regshift = spmi->addr.register_bit_offset;
if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
io_type = "memory";
info->io_setup = mem_setup;
- addrs[intf_num] = spmi->addr.address;
- info->io.info = &(addrs[intf_num]);
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
} else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
io_type = "I/O";
info->io_setup = port_setup;
- ports[intf_num] = spmi->addr.address;
- info->io.info = &(ports[intf_num]);
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else {
kfree(info);
printk("ipmi_si: Unknown ACPI I/O Address type\n");
return -EIO;
}
+ info->io.addr_data = spmi->addr.address;
- *new_info = info;
+ try_smi_init(info);
- printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n",
- si_type[intf_num], io_type, (unsigned long) spmi->addr.address);
return 0;
}
+
+static __devinit void acpi_find_bmc(void)
+{
+ acpi_status status;
+ struct SPMITable *spmi;
+ int i;
+
+ if (acpi_disabled)
+ return;
+
+ if (acpi_failure)
+ return;
+
+ for (i = 0; ; i++) {
+ status = acpi_get_firmware_table("SPMI", i+1,
+ ACPI_LOGICAL_ADDRESSING,
+ (struct acpi_table_header **)
+ &spmi);
+ if (status != AE_OK)
+ return;
+
+ try_init_acpi(spmi);
+ }
+}
#endif
#ifdef CONFIG_DMI
-typedef struct dmi_ipmi_data
+struct dmi_ipmi_data
{
u8 type;
u8 addr_space;
u8 irq;
u8 offset;
u8 slave_addr;
-} dmi_ipmi_data_t;
-
-static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS];
-static int dmi_data_entries;
+};
-static int __init decode_dmi(struct dmi_header *dm, int intf_num)
+static int __devinit decode_dmi(struct dmi_header *dm,
+ struct dmi_ipmi_data *dmi)
{
u8 *data = (u8 *)dm;
unsigned long base_addr;
u8 reg_spacing;
u8 len = dm->length;
- dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
- ipmi_data->type = data[4];
+ dmi->type = data[4];
memcpy(&base_addr, data+8, sizeof(unsigned long));
if (len >= 0x11) {
if (base_addr & 1) {
/* I/O */
base_addr &= 0xFFFE;
- ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
+ dmi->addr_space = IPMI_IO_ADDR_SPACE;
}
else {
/* Memory */
- ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE;
+ dmi->addr_space = IPMI_MEM_ADDR_SPACE;
}
/* If bit 4 of byte 0x10 is set, then the lsb for the address
is odd. */
- ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
+ dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4);
- ipmi_data->irq = data[0x11];
+ dmi->irq = data[0x11];
/* The top two bits of byte 0x10 hold the register spacing. */
reg_spacing = (data[0x10] & 0xC0) >> 6;
switch(reg_spacing){
case 0x00: /* Byte boundaries */
- ipmi_data->offset = 1;
+ dmi->offset = 1;
break;
case 0x01: /* 32-bit boundaries */
- ipmi_data->offset = 4;
+ dmi->offset = 4;
break;
case 0x02: /* 16-byte boundaries */
- ipmi_data->offset = 16;
+ dmi->offset = 16;
break;
default:
/* Some other interface, just ignore it. */
* wrong (and all that I have seen are I/O) so we just
* ignore that bit and assume I/O. Systems that use
* memory should use the newer spec, anyway. */
- ipmi_data->base_addr = base_addr & 0xfffe;
- ipmi_data->addr_space = IPMI_IO_ADDR_SPACE;
- ipmi_data->offset = 1;
- }
-
- ipmi_data->slave_addr = data[6];
-
- if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) {
- dmi_data_entries++;
- return 0;
+ dmi->base_addr = base_addr & 0xfffe;
+ dmi->addr_space = IPMI_IO_ADDR_SPACE;
+ dmi->offset = 1;
}
- memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t));
+ dmi->slave_addr = data[6];
- return -1;
+ return 0;
}
-static void __init dmi_find_bmc(void)
+static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data)
{
- struct dmi_device *dev = NULL;
- int intf_num = 0;
-
- while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
- if (intf_num >= SI_MAX_DRIVERS)
- break;
+ struct smi_info *info;
- decode_dmi((struct dmi_header *) dev->device_data, intf_num++);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ printk(KERN_ERR
+ "ipmi_si: Could not allocate SI data\n");
+ return;
}
-}
-
-static int try_init_smbios(int intf_num, struct smi_info **new_info)
-{
- struct smi_info *info;
- dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num;
- char *io_type;
- if (intf_num >= dmi_data_entries)
- return -ENODEV;
+ info->addr_source = "SMBIOS";
switch (ipmi_data->type) {
- case 0x01: /* KCS */
- si_type[intf_num] = "kcs";
- break;
- case 0x02: /* SMIC */
- si_type[intf_num] = "smic";
- break;
- case 0x03: /* BT */
- si_type[intf_num] = "bt";
- break;
- default:
- return -EIO;
- }
-
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n");
- return -ENOMEM;
+ case 0x01: /* KCS */
+ info->si_type = SI_KCS;
+ break;
+ case 0x02: /* SMIC */
+ info->si_type = SI_SMIC;
+ break;
+ case 0x03: /* BT */
+ info->si_type = SI_BT;
+ break;
+ default:
+ return;
}
- memset(info, 0, sizeof(*info));
- if (ipmi_data->addr_space == 1) {
- io_type = "memory";
+ switch (ipmi_data->addr_space) {
+ case IPMI_MEM_ADDR_SPACE:
info->io_setup = mem_setup;
- addrs[intf_num] = ipmi_data->base_addr;
- info->io.info = &(addrs[intf_num]);
- } else if (ipmi_data->addr_space == 2) {
- io_type = "I/O";
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ break;
+
+ case IPMI_IO_ADDR_SPACE:
info->io_setup = port_setup;
- ports[intf_num] = ipmi_data->base_addr;
- info->io.info = &(ports[intf_num]);
- } else {
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ break;
+
+ default:
kfree(info);
- printk("ipmi_si: Unknown SMBIOS I/O Address type.\n");
- return -EIO;
+ printk(KERN_WARNING
+ "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n",
+ ipmi_data->addr_space);
+ return;
}
+ info->io.addr_data = ipmi_data->base_addr;
- regspacings[intf_num] = ipmi_data->offset;
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
+ info->io.regspacing = ipmi_data->offset;
+ if (!info->io.regspacing)
info->io.regspacing = DEFAULT_REGSPACING;
info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
+ info->io.regshift = 0;
info->slave_addr = ipmi_data->slave_addr;
- irqs[intf_num] = ipmi_data->irq;
+ info->irq = ipmi_data->irq;
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
- *new_info = info;
+ try_smi_init(info);
+}
- printk("ipmi_si: Found SMBIOS-specified state machine at %s"
- " address 0x%lx, slave address 0x%x\n",
- io_type, (unsigned long)ipmi_data->base_addr,
- ipmi_data->slave_addr);
- return 0;
+static void __devinit dmi_find_bmc(void)
+{
+ struct dmi_device *dev = NULL;
+ struct dmi_ipmi_data data;
+ int rv;
+
+ while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) {
+ rv = decode_dmi((struct dmi_header *) dev->device_data, &data);
+ if (!rv)
+ try_init_dmi(&data);
+ }
}
#endif /* CONFIG_DMI */
#ifdef CONFIG_PCI
-#define PCI_ERMC_CLASSCODE 0x0C0700
+#define PCI_ERMC_CLASSCODE 0x0C0700
+#define PCI_ERMC_CLASSCODE_MASK 0xffffff00
+#define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff
+#define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00
+#define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01
+#define PCI_ERMC_CLASSCODE_TYPE_BT 0x02
+
#define PCI_HP_VENDOR_ID 0x103C
#define PCI_MMC_DEVICE_ID 0x121A
#define PCI_MMC_ADDR_CW 0x10
-/* Avoid more than one attempt to probe pci smic. */
-static int pci_smic_checked = 0;
+static void ipmi_pci_cleanup(struct smi_info *info)
+{
+ struct pci_dev *pdev = info->addr_source_data;
+
+ pci_disable_device(pdev);
+}
-static int find_pci_smic(int intf_num, struct smi_info **new_info)
+static int __devinit ipmi_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
{
- struct smi_info *info;
- int error;
- struct pci_dev *pci_dev = NULL;
- u16 base_addr;
- int fe_rmc = 0;
+ int rv;
+ int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK;
+ struct smi_info *info;
+ int first_reg_offset = 0;
- if (pci_smic_checked)
- return -ENODEV;
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return ENOMEM;
- pci_smic_checked = 1;
+ info->addr_source = "PCI";
- pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, NULL);
- if (! pci_dev) {
- pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL);
- if (pci_dev && (pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID))
- fe_rmc = 1;
- else
- return -ENODEV;
- }
+ switch (class_type) {
+ case PCI_ERMC_CLASSCODE_TYPE_SMIC:
+ info->si_type = SI_SMIC;
+ break;
- error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr);
- if (error)
- {
- pci_dev_put(pci_dev);
- printk(KERN_ERR
- "ipmi_si: pci_read_config_word() failed (%d).\n",
- error);
- return -ENODEV;
+ case PCI_ERMC_CLASSCODE_TYPE_KCS:
+ info->si_type = SI_KCS;
+ break;
+
+ case PCI_ERMC_CLASSCODE_TYPE_BT:
+ info->si_type = SI_BT;
+ break;
+
+ default:
+ kfree(info);
+ printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n",
+ pci_name(pdev), class_type);
+ return ENOMEM;
}
- /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */
- if (! (base_addr & 0x0001))
- {
- pci_dev_put(pci_dev);
- printk(KERN_ERR
- "ipmi_si: memory mapped I/O not supported for PCI"
- " smic.\n");
- return -ENODEV;
+ rv = pci_enable_device(pdev);
+ if (rv) {
+ printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n",
+ pci_name(pdev));
+ kfree(info);
+ return rv;
}
- base_addr &= 0xFFFE;
- if (! fe_rmc)
- /* Data register starts at base address + 1 in eRMC */
- ++base_addr;
+ info->addr_source_cleanup = ipmi_pci_cleanup;
+ info->addr_source_data = pdev;
- if (! is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) {
- pci_dev_put(pci_dev);
- return -ENODEV;
- }
+ if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID)
+ first_reg_offset = 1;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
- if (! info) {
- pci_dev_put(pci_dev);
- printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n");
- return -ENOMEM;
+ if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
}
- memset(info, 0, sizeof(*info));
+ info->io.addr_data = pci_resource_start(pdev, 0);
- info->io_setup = port_setup;
- ports[intf_num] = base_addr;
- info->io.info = &(ports[intf_num]);
- info->io.regspacing = regspacings[intf_num];
- if (! info->io.regspacing)
- info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regspacing = DEFAULT_REGSPACING;
info->io.regsize = DEFAULT_REGSPACING;
- info->io.regshift = regshifts[intf_num];
+ info->io.regshift = 0;
- *new_info = info;
+ info->irq = pdev->irq;
+ if (info->irq)
+ info->irq_setup = std_irq_setup;
- irqs[intf_num] = pci_dev->irq;
- si_type[intf_num] = "smic";
+ return try_smi_init(info);
+}
- printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n",
- (long unsigned int) base_addr);
+static void __devexit ipmi_pci_remove(struct pci_dev *pdev)
+{
+}
- pci_dev_put(pci_dev);
+#ifdef CONFIG_PM
+static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
return 0;
}
-#endif /* CONFIG_PCI */
-static int try_init_plug_and_play(int intf_num, struct smi_info **new_info)
+static int ipmi_pci_resume(struct pci_dev *pdev)
{
-#ifdef CONFIG_PCI
- if (find_pci_smic(intf_num, new_info) == 0)
- return 0;
+ return 0;
+}
#endif
- /* Include other methods here. */
- return -ENODEV;
-}
+static struct pci_device_id ipmi_pci_devices[] = {
+ { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) },
+ { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) }
+};
+MODULE_DEVICE_TABLE(pci, ipmi_pci_devices);
+
+static struct pci_driver ipmi_pci_driver = {
+ .name = DEVICE_NAME,
+ .id_table = ipmi_pci_devices,
+ .probe = ipmi_pci_probe,
+ .remove = __devexit_p(ipmi_pci_remove),
+#ifdef CONFIG_PM
+ .suspend = ipmi_pci_suspend,
+ .resume = ipmi_pci_resume,
+#endif
+};
+#endif /* CONFIG_PCI */
static int try_get_dev_id(struct smi_info *smi_info)
int rv = 0;
resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (! resp)
+ if (!resp)
return -ENOMEM;
/* Do a Get Device ID command, since it comes back with some
struct smi_info *smi = data;
out += sprintf(out, "interrupts_enabled: %d\n",
- smi->irq && ! smi->interrupt_disabled);
+ smi->irq && !smi->interrupt_disabled);
out += sprintf(out, "short_timeouts: %ld\n",
smi->short_timeouts);
out += sprintf(out, "long_timeouts: %ld\n",
{
struct ipmi_device_id *id = &smi_info->device_id;
const char mfr[3]=DELL_IANA_MFR_ID;
- if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr))) {
+ if (!memcmp(mfr, id->manufacturer_id, sizeof(mfr))) {
if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID &&
id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV &&
id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) {
{
struct ipmi_device_id *id = &smi_info->device_id;
const char mfr[3]=DELL_IANA_MFR_ID;
- if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr)) &&
+ if (!memcmp(mfr, id->manufacturer_id, sizeof(mfr)) &&
smi_info->si_type == SI_BT)
register_xaction_notifier(&dell_poweredge_bt_xaction_notifier);
}
del_timer_sync(&smi_info->si_timer);
}
-/* Returns 0 if initialized, or negative on an error. */
-static int init_one_smi(int intf_num, struct smi_info **smi)
+static struct ipmi_default_vals
+{
+ int type;
+ int port;
+} __devinit ipmi_defaults[] =
+{
+ { .type = SI_KCS, .port = 0xca2 },
+ { .type = SI_SMIC, .port = 0xca9 },
+ { .type = SI_BT, .port = 0xe4 },
+ { .port = 0 }
+};
+
+static __devinit void default_find_bmc(void)
+{
+ struct smi_info *info;
+ int i;
+
+ for (i = 0; ; i++) {
+ if (!ipmi_defaults[i].port)
+ break;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return;
+
+ info->addr_source = NULL;
+
+ info->si_type = ipmi_defaults[i].type;
+ info->io_setup = port_setup;
+ info->io.addr_data = ipmi_defaults[i].port;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+
+ info->io.addr = NULL;
+ info->io.regspacing = DEFAULT_REGSPACING;
+ info->io.regsize = DEFAULT_REGSPACING;
+ info->io.regshift = 0;
+
+ if (try_smi_init(info) == 0) {
+ /* Found one... */
+ printk(KERN_INFO "ipmi_si: Found default %s state"
+ " machine at %s address 0x%lx\n",
+ si_to_str[info->si_type],
+ addr_space_to_str[info->io.addr_type],
+ info->io.addr_data);
+ return;
+ }
+ }
+}
+
+static int is_new_interface(struct smi_info *info)
{
- int rv;
- struct smi_info *new_smi;
+ struct smi_info *e;
+ list_for_each_entry(e, &smi_infos, link) {
+ if (e->io.addr_type != info->io.addr_type)
+ continue;
+ if (e->io.addr_data == info->io.addr_data)
+ return 0;
+ }
- rv = try_init_mem(intf_num, &new_smi);
- if (rv)
- rv = try_init_port(intf_num, &new_smi);
-#ifdef CONFIG_ACPI
- if (rv && si_trydefaults)
- rv = try_init_acpi(intf_num, &new_smi);
-#endif
-#ifdef CONFIG_DMI
- if (rv && si_trydefaults)
- rv = try_init_smbios(intf_num, &new_smi);
-#endif
- if (rv && si_trydefaults)
- rv = try_init_plug_and_play(intf_num, &new_smi);
+ return 1;
+}
- if (rv)
- return rv;
+static int try_smi_init(struct smi_info *new_smi)
+{
+ int rv;
+
+ if (new_smi->addr_source) {
+ printk(KERN_INFO "ipmi_si: Trying %s-specified %s state"
+ " machine at %s address 0x%lx, slave address 0x%x,"
+ " irq %d\n",
+ new_smi->addr_source,
+ si_to_str[new_smi->si_type],
+ addr_space_to_str[new_smi->io.addr_type],
+ new_smi->io.addr_data,
+ new_smi->slave_addr, new_smi->irq);
+ }
+
+ down(&smi_infos_lock);
+ if (!is_new_interface(new_smi)) {
+ printk(KERN_WARNING "ipmi_si: duplicate interface\n");
+ rv = -EBUSY;
+ goto out_err;
+ }
/* So we know not to free it unless we have allocated one. */
new_smi->intf = NULL;
new_smi->si_sm = NULL;
new_smi->handlers = NULL;
- if (! new_smi->irq_setup) {
- new_smi->irq = irqs[intf_num];
- new_smi->irq_setup = std_irq_setup;
- new_smi->irq_cleanup = std_irq_cleanup;
- }
-
- /* Default to KCS if no type is specified. */
- if (si_type[intf_num] == NULL) {
- if (si_trydefaults)
- si_type[intf_num] = "kcs";
- else {
- rv = -EINVAL;
- goto out_err;
- }
- }
-
- /* Set up the state machine to use. */
- if (strcmp(si_type[intf_num], "kcs") == 0) {
+ switch (new_smi->si_type) {
+ case SI_KCS:
new_smi->handlers = &kcs_smi_handlers;
- new_smi->si_type = SI_KCS;
- } else if (strcmp(si_type[intf_num], "smic") == 0) {
+ break;
+
+ case SI_SMIC:
new_smi->handlers = &smic_smi_handlers;
- new_smi->si_type = SI_SMIC;
- } else if (strcmp(si_type[intf_num], "bt") == 0) {
+ break;
+
+ case SI_BT:
new_smi->handlers = &bt_smi_handlers;
- new_smi->si_type = SI_BT;
- } else {
+ break;
+
+ default:
/* No support for anything else yet. */
rv = -EIO;
goto out_err;
/* Allocate the state machine's data and initialize it. */
new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL);
- if (! new_smi->si_sm) {
+ if (!new_smi->si_sm) {
printk(" Could not allocate state machine memory\n");
rv = -ENOMEM;
goto out_err;
/* Do low-level detection first. */
if (new_smi->handlers->detect(new_smi->si_sm)) {
+ if (new_smi->addr_source)
+ printk(KERN_INFO "ipmi_si: Interface detection"
+ " failed\n");
rv = -ENODEV;
goto out_err;
}
/* Attempt a get device id command. If it fails, we probably
- don't have a SMI here. */
+ don't have a BMC here. */
rv = try_get_dev_id(new_smi);
- if (rv)
+ if (rv) {
+ if (new_smi->addr_source)
+ printk(KERN_INFO "ipmi_si: There appears to be no BMC"
+ " at this location\n");
goto out_err;
+ }
setup_oem_data_handler(new_smi);
setup_xaction_handlers(new_smi);
/* Try to claim any interrupts. */
- new_smi->irq_setup(new_smi);
+ if (new_smi->irq_setup)
+ new_smi->irq_setup(new_smi);
INIT_LIST_HEAD(&(new_smi->xmit_msgs));
INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
new_smi->interrupt_disabled = 0;
atomic_set(&new_smi->stop_operation, 0);
- new_smi->intf_num = intf_num;
+ new_smi->intf_num = smi_num;
+ smi_num++;
/* Start clearing the flags before we enable interrupts or the
timer to avoid racing with the timer. */
goto out_err_stop_timer;
}
- *smi = new_smi;
+ list_add_tail(&new_smi->link, &smi_infos);
+
+ up(&smi_infos_lock);
- printk(" IPMI %s interface initialized\n", si_type[intf_num]);
+ printk(" IPMI %s interface initialized\n",si_to_str[new_smi->si_type]);
return 0;
if (new_smi->intf)
ipmi_unregister_smi(new_smi->intf);
- new_smi->irq_cleanup(new_smi);
+ if (new_smi->irq_cleanup)
+ new_smi->irq_cleanup(new_smi);
/* Wait until we know that we are out of any interrupt
handlers might have been running before we freed the
new_smi->handlers->cleanup(new_smi->si_sm);
kfree(new_smi->si_sm);
}
+ if (new_smi->addr_source_cleanup)
+ new_smi->addr_source_cleanup(new_smi);
if (new_smi->io_cleanup)
new_smi->io_cleanup(new_smi);
+ up(&smi_infos_lock);
+
return rv;
}
-static __init int init_ipmi_si(void)
+static __devinit int init_ipmi_si(void)
{
- int rv = 0;
- int pos = 0;
int i;
char *str;
printk(KERN_INFO "IPMI System Interface driver.\n");
+ hardcode_find_bmc();
+
#ifdef CONFIG_DMI
dmi_find_bmc();
#endif
- rv = init_one_smi(0, &(smi_infos[pos]));
- if (rv && ! ports[0] && si_trydefaults) {
- /* If we are trying defaults and the initial port is
- not set, then set it. */
- si_type[0] = "kcs";
- ports[0] = DEFAULT_KCS_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
- if (rv) {
- /* No KCS - try SMIC */
- si_type[0] = "smic";
- ports[0] = DEFAULT_SMIC_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
- }
- if (rv) {
- /* No SMIC - try BT */
- si_type[0] = "bt";
- ports[0] = DEFAULT_BT_IO_PORT;
- rv = init_one_smi(0, &(smi_infos[pos]));
- }
- }
- if (rv == 0)
- pos++;
+#ifdef CONFIG_ACPI
+ if (si_trydefaults)
+ acpi_find_bmc();
+#endif
- for (i = 1; i < SI_MAX_PARMS; i++) {
- rv = init_one_smi(i, &(smi_infos[pos]));
- if (rv == 0)
- pos++;
+#ifdef CONFIG_PCI
+ pci_module_init(&ipmi_pci_driver);
+#endif
+
+ if (si_trydefaults) {
+ down(&smi_infos_lock);
+ if (list_empty(&smi_infos)) {
+ /* No BMC was found, try defaults. */
+ up(&smi_infos_lock);
+ default_find_bmc();
+ } else {
+ up(&smi_infos_lock);
+ }
}
- if (smi_infos[0] == NULL) {
+ down(&smi_infos_lock);
+ if (list_empty(&smi_infos)) {
+ up(&smi_infos_lock);
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&ipmi_pci_driver);
+#endif
printk("ipmi_si: Unable to find any System Interface(s)\n");
return -ENODEV;
+ } else {
+ up(&smi_infos_lock);
+ return 0;
}
-
- return 0;
}
module_init(init_ipmi_si);
-static void __exit cleanup_one_si(struct smi_info *to_clean)
+static void __devexit cleanup_one_si(struct smi_info *to_clean)
{
int rv;
unsigned long flags;
- if (! to_clean)
+ if (!to_clean)
return;
+ list_del(&to_clean->link);
+
/* Tell the timer and interrupt handlers that we are shutting
down. */
spin_lock_irqsave(&(to_clean->si_lock), flags);
spin_lock(&(to_clean->msg_lock));
atomic_inc(&to_clean->stop_operation);
- to_clean->irq_cleanup(to_clean);
+
+ if (to_clean->irq_cleanup)
+ to_clean->irq_cleanup(to_clean);
spin_unlock(&(to_clean->msg_lock));
spin_unlock_irqrestore(&(to_clean->si_lock), flags);
kfree(to_clean->si_sm);
+ if (to_clean->addr_source_cleanup)
+ to_clean->addr_source_cleanup(to_clean);
if (to_clean->io_cleanup)
to_clean->io_cleanup(to_clean);
}
static __exit void cleanup_ipmi_si(void)
{
- int i;
+ struct smi_info *e, *tmp_e;
- if (! initialized)
+ if (!initialized)
return;
- for (i = 0; i < SI_MAX_DRIVERS; i++) {
- cleanup_one_si(smi_infos[i]);
- }
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&ipmi_pci_driver);
+#endif
+
+ down(&smi_infos_lock);
+ list_for_each_entry_safe(e, tmp_e, &smi_infos, link)
+ cleanup_one_si(e);
+ up(&smi_infos_lock);
}
module_exit(cleanup_ipmi_si);
projects / powerpc.git / commitdiff