And rename it to irq.c.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o
-obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_PCI) += pci.o irq.o
--- /dev/null
+/*
+ * This module supports the iSeries PCI bus interrupt handling
+ * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp>
+ * Copyright (C) 2004-2005 IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the:
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330,
+ * Boston, MA 02111-1307 USA
+ *
+ * Change Activity:
+ * Created, December 13, 2000 by Wayne Holm
+ * End Change Activity
+ */
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/bootmem.h>
+#include <linux/ide.h>
+#include <linux/irq.h>
+#include <linux/spinlock.h>
+
+#include <asm/ppcdebug.h>
+#include <asm/iSeries/HvTypes.h>
+#include <asm/iSeries/HvLpEvent.h>
+#include <asm/iSeries/HvCallPci.h>
+#include <asm/iSeries/HvCallXm.h>
+#include <asm/iSeries/iSeries_irq.h>
+
+/* This maps virtual irq numbers to real irqs */
+unsigned int virt_irq_to_real_map[NR_IRQS];
+
+/* The next available virtual irq number */
+/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */
+static int next_virtual_irq = 2;
+
+static long Pci_Interrupt_Count;
+static long Pci_Event_Count;
+
+enum XmPciLpEvent_Subtype {
+ XmPciLpEvent_BusCreated = 0, // PHB has been created
+ XmPciLpEvent_BusError = 1, // PHB has failed
+ XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus
+ XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed
+ XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered
+ XmPciLpEvent_BusRecovered = 12, // PHB has been recovered
+ XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing
+ XmPciLpEvent_BridgeError = 21, // Bridge Error
+ XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt
+};
+
+struct XmPciLpEvent_BusInterrupt {
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+};
+
+struct XmPciLpEvent_NodeInterrupt {
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+ HvAgentId deviceId;
+};
+
+struct XmPciLpEvent {
+ struct HvLpEvent hvLpEvent;
+
+ union {
+ u64 alignData; // Align on an 8-byte boundary
+
+ struct {
+ u32 fisr;
+ HvBusNumber busNumber;
+ HvSubBusNumber subBusNumber;
+ HvAgentId deviceId;
+ } slotInterrupt;
+
+ struct XmPciLpEvent_BusInterrupt busFailed;
+ struct XmPciLpEvent_BusInterrupt busRecovered;
+ struct XmPciLpEvent_BusInterrupt busCreated;
+
+ struct XmPciLpEvent_NodeInterrupt nodeFailed;
+ struct XmPciLpEvent_NodeInterrupt nodeRecovered;
+
+ } eventData;
+
+};
+
+static void intReceived(struct XmPciLpEvent *eventParm,
+ struct pt_regs *regsParm)
+{
+ int irq;
+
+ ++Pci_Interrupt_Count;
+
+ switch (eventParm->hvLpEvent.xSubtype) {
+ case XmPciLpEvent_SlotInterrupt:
+ irq = eventParm->hvLpEvent.xCorrelationToken;
+ /* Dispatch the interrupt handlers for this irq */
+ ppc_irq_dispatch_handler(regsParm, irq);
+ HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
+ eventParm->eventData.slotInterrupt.subBusNumber,
+ eventParm->eventData.slotInterrupt.deviceId);
+ break;
+ /* Ignore error recovery events for now */
+ case XmPciLpEvent_BusCreated:
+ printk(KERN_INFO "intReceived: system bus %d created\n",
+ eventParm->eventData.busCreated.busNumber);
+ break;
+ case XmPciLpEvent_BusError:
+ case XmPciLpEvent_BusFailed:
+ printk(KERN_INFO "intReceived: system bus %d failed\n",
+ eventParm->eventData.busFailed.busNumber);
+ break;
+ case XmPciLpEvent_BusRecovered:
+ case XmPciLpEvent_UnQuiesceBus:
+ printk(KERN_INFO "intReceived: system bus %d recovered\n",
+ eventParm->eventData.busRecovered.busNumber);
+ break;
+ case XmPciLpEvent_NodeFailed:
+ case XmPciLpEvent_BridgeError:
+ printk(KERN_INFO
+ "intReceived: multi-adapter bridge %d/%d/%d failed\n",
+ eventParm->eventData.nodeFailed.busNumber,
+ eventParm->eventData.nodeFailed.subBusNumber,
+ eventParm->eventData.nodeFailed.deviceId);
+ break;
+ case XmPciLpEvent_NodeRecovered:
+ printk(KERN_INFO
+ "intReceived: multi-adapter bridge %d/%d/%d recovered\n",
+ eventParm->eventData.nodeRecovered.busNumber,
+ eventParm->eventData.nodeRecovered.subBusNumber,
+ eventParm->eventData.nodeRecovered.deviceId);
+ break;
+ default:
+ printk(KERN_ERR
+ "intReceived: unrecognized event subtype 0x%x\n",
+ eventParm->hvLpEvent.xSubtype);
+ break;
+ }
+}
+
+static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
+ struct pt_regs *regsParm)
+{
+#ifdef CONFIG_PCI
+ ++Pci_Event_Count;
+
+ if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
+ switch (eventParm->xFlags.xFunction) {
+ case HvLpEvent_Function_Int:
+ intReceived((struct XmPciLpEvent *)eventParm, regsParm);
+ break;
+ case HvLpEvent_Function_Ack:
+ printk(KERN_ERR
+ "XmPciLpEvent_handler: unexpected ack received\n");
+ break;
+ default:
+ printk(KERN_ERR
+ "XmPciLpEvent_handler: unexpected event function %d\n",
+ (int)eventParm->xFlags.xFunction);
+ break;
+ }
+ } else if (eventParm)
+ printk(KERN_ERR
+ "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n",
+ (int)eventParm->xType);
+ else
+ printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n");
+#endif
+}
+
+/*
+ * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
+ * It must be called before the bus walk.
+ */
+void __init iSeries_init_IRQ(void)
+{
+ /* Register PCI event handler and open an event path */
+ int xRc;
+
+ xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
+ &XmPciLpEvent_handler);
+ if (xRc == 0) {
+ xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
+ if (xRc != 0)
+ printk(KERN_ERR "iSeries_init_IRQ: open event path "
+ "failed with rc 0x%x\n", xRc);
+ } else
+ printk(KERN_ERR "iSeries_init_IRQ: register handler "
+ "failed with rc 0x%x\n", xRc);
+}
+
+#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
+#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
+#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7)
+
+/*
+ * This will be called by device drivers (via enable_IRQ)
+ * to enable INTA in the bridge interrupt status register.
+ */
+static void iSeries_enable_IRQ(unsigned int irq)
+{
+ u32 bus, deviceId, function, mask;
+ const u32 subBus = 0;
+ unsigned int rirq = virt_irq_to_real_map[irq];
+
+ /* The IRQ has already been locked by the caller */
+ bus = REAL_IRQ_TO_BUS(rirq);
+ function = REAL_IRQ_TO_FUNC(rirq);
+ deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+
+ /* Unmask secondary INTA */
+ mask = 0x80000000;
+ HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
+ bus, subBus, deviceId, irq);
+}
+
+/* This is called by iSeries_activate_IRQs */
+static unsigned int iSeries_startup_IRQ(unsigned int irq)
+{
+ u32 bus, deviceId, function, mask;
+ const u32 subBus = 0;
+ unsigned int rirq = virt_irq_to_real_map[irq];
+
+ bus = REAL_IRQ_TO_BUS(rirq);
+ function = REAL_IRQ_TO_FUNC(rirq);
+ deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+
+ /* Link the IRQ number to the bridge */
+ HvCallXm_connectBusUnit(bus, subBus, deviceId, irq);
+
+ /* Unmask bridge interrupts in the FISR */
+ mask = 0x01010000 << function;
+ HvCallPci_unmaskFisr(bus, subBus, deviceId, mask);
+ iSeries_enable_IRQ(irq);
+ return 0;
+}
+
+/*
+ * This is called out of iSeries_fixup to activate interrupt
+ * generation for usable slots
+ */
+void __init iSeries_activate_IRQs()
+{
+ int irq;
+ unsigned long flags;
+
+ for_each_irq (irq) {
+ irq_desc_t *desc = get_irq_desc(irq);
+
+ if (desc && desc->handler && desc->handler->startup) {
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->handler->startup(irq);
+ spin_unlock_irqrestore(&desc->lock, flags);
+ }
+ }
+}
+
+/* this is not called anywhere currently */
+static void iSeries_shutdown_IRQ(unsigned int irq)
+{
+ u32 bus, deviceId, function, mask;
+ const u32 subBus = 0;
+ unsigned int rirq = virt_irq_to_real_map[irq];
+
+ /* irq should be locked by the caller */
+ bus = REAL_IRQ_TO_BUS(rirq);
+ function = REAL_IRQ_TO_FUNC(rirq);
+ deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+
+ /* Invalidate the IRQ number in the bridge */
+ HvCallXm_connectBusUnit(bus, subBus, deviceId, 0);
+
+ /* Mask bridge interrupts in the FISR */
+ mask = 0x01010000 << function;
+ HvCallPci_maskFisr(bus, subBus, deviceId, mask);
+}
+
+/*
+ * This will be called by device drivers (via disable_IRQ)
+ * to disable INTA in the bridge interrupt status register.
+ */
+static void iSeries_disable_IRQ(unsigned int irq)
+{
+ u32 bus, deviceId, function, mask;
+ const u32 subBus = 0;
+ unsigned int rirq = virt_irq_to_real_map[irq];
+
+ /* The IRQ has already been locked by the caller */
+ bus = REAL_IRQ_TO_BUS(rirq);
+ function = REAL_IRQ_TO_FUNC(rirq);
+ deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
+
+ /* Mask secondary INTA */
+ mask = 0x80000000;
+ HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
+ bus, subBus, deviceId, irq);
+}
+
+/*
+ * Need to define this so ppc_irq_dispatch_handler will NOT call
+ * enable_IRQ at the end of interrupt handling. However, this does
+ * nothing because there is not enough information provided to do
+ * the EOI HvCall. This is done by XmPciLpEvent.c
+ */
+static void iSeries_end_IRQ(unsigned int irq)
+{
+}
+
+static hw_irq_controller iSeries_IRQ_handler = {
+ .typename = "iSeries irq controller",
+ .startup = iSeries_startup_IRQ,
+ .shutdown = iSeries_shutdown_IRQ,
+ .enable = iSeries_enable_IRQ,
+ .disable = iSeries_disable_IRQ,
+ .end = iSeries_end_IRQ
+};
+
+/*
+ * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot
+ * It calculates the irq value for the slot.
+ * Note that subBusNumber is always 0 (at the moment at least).
+ */
+int __init iSeries_allocate_IRQ(HvBusNumber busNumber,
+ HvSubBusNumber subBusNumber, HvAgentId deviceId)
+{
+ unsigned int realirq, virtirq;
+ u8 idsel = (deviceId >> 4);
+ u8 function = deviceId & 7;
+
+ virtirq = next_virtual_irq++;
+ realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function;
+ virt_irq_to_real_map[virtirq] = realirq;
+
+ irq_desc[virtirq].handler = &iSeries_IRQ_handler;
+ return virtirq;
+}
+
+int virt_irq_create_mapping(unsigned int real_irq)
+{
+ BUG(); /* Don't call this on iSeries, yet */
+
+ return 0;
+}
+
+void virt_irq_init(void)
+{
+ return;
+}
obj-$(CONFIG_PPC_OF) += of_device.o
-pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \
- iSeries_VpdInfo.o
+pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_VpdInfo.o
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
obj-$(CONFIG_PCI) += pci.o pci_iommu.o iomap.o $(pci-obj-y)
+++ /dev/null
-/*
- * This module supports the iSeries PCI bus interrupt handling
- * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp>
- * Copyright (C) 2004-2005 IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the:
- * Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330,
- * Boston, MA 02111-1307 USA
- *
- * Change Activity:
- * Created, December 13, 2000 by Wayne Holm
- * End Change Activity
- */
-#include <linux/config.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/threads.h>
-#include <linux/smp.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/bootmem.h>
-#include <linux/ide.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-
-#include <asm/ppcdebug.h>
-#include <asm/iSeries/HvTypes.h>
-#include <asm/iSeries/HvLpEvent.h>
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/iSeries_irq.h>
-
-/* This maps virtual irq numbers to real irqs */
-unsigned int virt_irq_to_real_map[NR_IRQS];
-
-/* The next available virtual irq number */
-/* Note: the pcnet32 driver assumes irq numbers < 2 aren't valid. :( */
-static int next_virtual_irq = 2;
-
-static long Pci_Interrupt_Count;
-static long Pci_Event_Count;
-
-enum XmPciLpEvent_Subtype {
- XmPciLpEvent_BusCreated = 0, // PHB has been created
- XmPciLpEvent_BusError = 1, // PHB has failed
- XmPciLpEvent_BusFailed = 2, // Msg to Secondary, Primary failed bus
- XmPciLpEvent_NodeFailed = 4, // Multi-adapter bridge has failed
- XmPciLpEvent_NodeRecovered = 5, // Multi-adapter bridge has recovered
- XmPciLpEvent_BusRecovered = 12, // PHB has been recovered
- XmPciLpEvent_UnQuiesceBus = 18, // Secondary bus unqiescing
- XmPciLpEvent_BridgeError = 21, // Bridge Error
- XmPciLpEvent_SlotInterrupt = 22 // Slot interrupt
-};
-
-struct XmPciLpEvent_BusInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
-};
-
-struct XmPciLpEvent_NodeInterrupt {
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
-};
-
-struct XmPciLpEvent {
- struct HvLpEvent hvLpEvent;
-
- union {
- u64 alignData; // Align on an 8-byte boundary
-
- struct {
- u32 fisr;
- HvBusNumber busNumber;
- HvSubBusNumber subBusNumber;
- HvAgentId deviceId;
- } slotInterrupt;
-
- struct XmPciLpEvent_BusInterrupt busFailed;
- struct XmPciLpEvent_BusInterrupt busRecovered;
- struct XmPciLpEvent_BusInterrupt busCreated;
-
- struct XmPciLpEvent_NodeInterrupt nodeFailed;
- struct XmPciLpEvent_NodeInterrupt nodeRecovered;
-
- } eventData;
-
-};
-
-static void intReceived(struct XmPciLpEvent *eventParm,
- struct pt_regs *regsParm)
-{
- int irq;
-
- ++Pci_Interrupt_Count;
-
- switch (eventParm->hvLpEvent.xSubtype) {
- case XmPciLpEvent_SlotInterrupt:
- irq = eventParm->hvLpEvent.xCorrelationToken;
- /* Dispatch the interrupt handlers for this irq */
- ppc_irq_dispatch_handler(regsParm, irq);
- HvCallPci_eoi(eventParm->eventData.slotInterrupt.busNumber,
- eventParm->eventData.slotInterrupt.subBusNumber,
- eventParm->eventData.slotInterrupt.deviceId);
- break;
- /* Ignore error recovery events for now */
- case XmPciLpEvent_BusCreated:
- printk(KERN_INFO "intReceived: system bus %d created\n",
- eventParm->eventData.busCreated.busNumber);
- break;
- case XmPciLpEvent_BusError:
- case XmPciLpEvent_BusFailed:
- printk(KERN_INFO "intReceived: system bus %d failed\n",
- eventParm->eventData.busFailed.busNumber);
- break;
- case XmPciLpEvent_BusRecovered:
- case XmPciLpEvent_UnQuiesceBus:
- printk(KERN_INFO "intReceived: system bus %d recovered\n",
- eventParm->eventData.busRecovered.busNumber);
- break;
- case XmPciLpEvent_NodeFailed:
- case XmPciLpEvent_BridgeError:
- printk(KERN_INFO
- "intReceived: multi-adapter bridge %d/%d/%d failed\n",
- eventParm->eventData.nodeFailed.busNumber,
- eventParm->eventData.nodeFailed.subBusNumber,
- eventParm->eventData.nodeFailed.deviceId);
- break;
- case XmPciLpEvent_NodeRecovered:
- printk(KERN_INFO
- "intReceived: multi-adapter bridge %d/%d/%d recovered\n",
- eventParm->eventData.nodeRecovered.busNumber,
- eventParm->eventData.nodeRecovered.subBusNumber,
- eventParm->eventData.nodeRecovered.deviceId);
- break;
- default:
- printk(KERN_ERR
- "intReceived: unrecognized event subtype 0x%x\n",
- eventParm->hvLpEvent.xSubtype);
- break;
- }
-}
-
-static void XmPciLpEvent_handler(struct HvLpEvent *eventParm,
- struct pt_regs *regsParm)
-{
-#ifdef CONFIG_PCI
- ++Pci_Event_Count;
-
- if (eventParm && (eventParm->xType == HvLpEvent_Type_PciIo)) {
- switch (eventParm->xFlags.xFunction) {
- case HvLpEvent_Function_Int:
- intReceived((struct XmPciLpEvent *)eventParm, regsParm);
- break;
- case HvLpEvent_Function_Ack:
- printk(KERN_ERR
- "XmPciLpEvent_handler: unexpected ack received\n");
- break;
- default:
- printk(KERN_ERR
- "XmPciLpEvent_handler: unexpected event function %d\n",
- (int)eventParm->xFlags.xFunction);
- break;
- }
- } else if (eventParm)
- printk(KERN_ERR
- "XmPciLpEvent_handler: Unrecognized PCI event type 0x%x\n",
- (int)eventParm->xType);
- else
- printk(KERN_ERR "XmPciLpEvent_handler: NULL event received\n");
-#endif
-}
-
-/*
- * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c
- * It must be called before the bus walk.
- */
-void __init iSeries_init_IRQ(void)
-{
- /* Register PCI event handler and open an event path */
- int xRc;
-
- xRc = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo,
- &XmPciLpEvent_handler);
- if (xRc == 0) {
- xRc = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0);
- if (xRc != 0)
- printk(KERN_ERR "iSeries_init_IRQ: open event path "
- "failed with rc 0x%x\n", xRc);
- } else
- printk(KERN_ERR "iSeries_init_IRQ: register handler "
- "failed with rc 0x%x\n", xRc);
-}
-
-#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1)
-#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1)
-#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7)
-
-/*
- * This will be called by device drivers (via enable_IRQ)
- * to enable INTA in the bridge interrupt status register.
- */
-static void iSeries_enable_IRQ(unsigned int irq)
-{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
-
- /* The IRQ has already been locked by the caller */
- bus = REAL_IRQ_TO_BUS(rirq);
- function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
-
- /* Unmask secondary INTA */
- mask = 0x80000000;
- HvCallPci_unmaskInterrupts(bus, subBus, deviceId, mask);
- PPCDBG(PPCDBG_BUSWALK, "iSeries_enable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
- bus, subBus, deviceId, irq);
-}
-
-/* This is called by iSeries_activate_IRQs */
-static unsigned int iSeries_startup_IRQ(unsigned int irq)
-{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
-
- bus = REAL_IRQ_TO_BUS(rirq);
- function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
-
- /* Link the IRQ number to the bridge */
- HvCallXm_connectBusUnit(bus, subBus, deviceId, irq);
-
- /* Unmask bridge interrupts in the FISR */
- mask = 0x01010000 << function;
- HvCallPci_unmaskFisr(bus, subBus, deviceId, mask);
- iSeries_enable_IRQ(irq);
- return 0;
-}
-
-/*
- * This is called out of iSeries_fixup to activate interrupt
- * generation for usable slots
- */
-void __init iSeries_activate_IRQs()
-{
- int irq;
- unsigned long flags;
-
- for_each_irq (irq) {
- irq_desc_t *desc = get_irq_desc(irq);
-
- if (desc && desc->handler && desc->handler->startup) {
- spin_lock_irqsave(&desc->lock, flags);
- desc->handler->startup(irq);
- spin_unlock_irqrestore(&desc->lock, flags);
- }
- }
-}
-
-/* this is not called anywhere currently */
-static void iSeries_shutdown_IRQ(unsigned int irq)
-{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
-
- /* irq should be locked by the caller */
- bus = REAL_IRQ_TO_BUS(rirq);
- function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
-
- /* Invalidate the IRQ number in the bridge */
- HvCallXm_connectBusUnit(bus, subBus, deviceId, 0);
-
- /* Mask bridge interrupts in the FISR */
- mask = 0x01010000 << function;
- HvCallPci_maskFisr(bus, subBus, deviceId, mask);
-}
-
-/*
- * This will be called by device drivers (via disable_IRQ)
- * to disable INTA in the bridge interrupt status register.
- */
-static void iSeries_disable_IRQ(unsigned int irq)
-{
- u32 bus, deviceId, function, mask;
- const u32 subBus = 0;
- unsigned int rirq = virt_irq_to_real_map[irq];
-
- /* The IRQ has already been locked by the caller */
- bus = REAL_IRQ_TO_BUS(rirq);
- function = REAL_IRQ_TO_FUNC(rirq);
- deviceId = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function;
-
- /* Mask secondary INTA */
- mask = 0x80000000;
- HvCallPci_maskInterrupts(bus, subBus, deviceId, mask);
- PPCDBG(PPCDBG_BUSWALK, "iSeries_disable_IRQ 0x%02X.%02X.%02X 0x%04X\n",
- bus, subBus, deviceId, irq);
-}
-
-/*
- * Need to define this so ppc_irq_dispatch_handler will NOT call
- * enable_IRQ at the end of interrupt handling. However, this does
- * nothing because there is not enough information provided to do
- * the EOI HvCall. This is done by XmPciLpEvent.c
- */
-static void iSeries_end_IRQ(unsigned int irq)
-{
-}
-
-static hw_irq_controller iSeries_IRQ_handler = {
- .typename = "iSeries irq controller",
- .startup = iSeries_startup_IRQ,
- .shutdown = iSeries_shutdown_IRQ,
- .enable = iSeries_enable_IRQ,
- .disable = iSeries_disable_IRQ,
- .end = iSeries_end_IRQ
-};
-
-/*
- * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot
- * It calculates the irq value for the slot.
- * Note that subBusNumber is always 0 (at the moment at least).
- */
-int __init iSeries_allocate_IRQ(HvBusNumber busNumber,
- HvSubBusNumber subBusNumber, HvAgentId deviceId)
-{
- unsigned int realirq, virtirq;
- u8 idsel = (deviceId >> 4);
- u8 function = deviceId & 7;
-
- virtirq = next_virtual_irq++;
- realirq = ((busNumber - 1) << 6) + ((idsel - 1) << 3) + function;
- virt_irq_to_real_map[virtirq] = realirq;
-
- irq_desc[virtirq].handler = &iSeries_IRQ_handler;
- return virtirq;
-}
-
-int virt_irq_create_mapping(unsigned int real_irq)
-{
- BUG(); /* Don't call this on iSeries, yet */
-
- return 0;
-}
-
-void virt_irq_init(void)
-{
- return;
-}
-
projects / powerpc.git / commitdiff